Micropulse Lidar (MPL): high resolution (mplhr)

Browse Data

The micropulse lidar (MPL) is a ground-based, optical, remote-sensing system designed primarily to determine the altitude of clouds; however, it is also used for detection of atmospheric aerosols. The physical principle is the same as for radar. Pulses of energy are transmitted into the atmosphere; the energy scattered back to the transceiver is collected and measured as a time-resolved signal, thereby detecting clouds and aerosols in real time.

From the time delay between each outgoing pulse and the backscattered signal, the distance to the scatterer is inferred. Post-processing of the lidar return characterizes the extent and properties of aerosols or other particles in a region.

Measurements

Location

Southern Great Plains [development]
  • Latitude: 36.605
  • Longitude: -97.485
  • Publication Date: 1998-09-29
  • Start Date: 1998-09-29
  • End Date: 1998-11-18
  • Last Updated: 1998-11-19

Instrument Mentor

https://www.arm.gov/connect-with-arm/organization/instrument-mentors/list#mpl

Richard Coulter
Argonne National Laboratory
Connor Flynn
University of Oklahoma School of Meteorology
Brian Ermold
Pacific Northwest National Laboratory
Timothy Martin
Argonne National Laboratory
Paytsar Muradyan
Argonne National Laboratory

DOI / Citation

http://dx.doi.org/10.5439/1182050
Atmospheric Radiation Measurement (ARM) user facility. , updated hourly. (). 1998-09-29 to 1998-11-18, << site >> << facility >>. ARM Data Center. Data set accessed .