netcdf twpecmwftenX30.c1.20151001.000000 {
dimensions:
	time = UNLIMITED ; // (192 currently)
	domains = 3 ;
	levels = 137 ;
variables:
	int base_time ;
		base_time:string = " 1-Oct-2015, 00:00:00 GMT" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2015-10-01, 00:00:00 0:00" ;
	float domains(domains) ;
		domains:long_name = "domains" ;
		domains:units = "unitless" ;
		domains:model_resolution = "0.56 x 0.56 degrees" ;
		domains:description = "Domains over which all quantities are averaged" ;
		domains:areas_covered = "Each domain is a single point at the following coordinates" ;
		domains:area_of_domain_06 = " 130.92, -12.44 (single point)" ;
		domains:area_of_domain_28 = " 129.80, -12.44 (single point)" ;
		domains:area_of_domain_50 = " 131.06, -13.57 (single point)" ;
	float lev(levels) ;
		lev:long_name = "Level" ;
		lev:units = "unitless" ;
		lev:description = "Model Levels where Level 1 is the top full level of the model (10 hPa), level ** is the lowest full level." ;
		lev:comment = "The pressure of each of the model levels can be retrieved from the variables file." ;
	int idat(time) ;
		idat:long_name = "Initial Date (GMT)" ;
		idat:units = "yyyymmdd" ;
		idat:description = "The initial date of the forecast from which the data was retrieved" ;
	float itim(time) ;
		itim:long_name = "Forecast Time (GMT)" ;
		itim:units = "hours" ;
		itim:description = "The initial time of the forecast from which the data was retrieved" ;
	int vdat(time) ;
		vdat:long_name = "Verify Date (GMT)" ;
		vdat:units = "yyyymmdd" ;
		vdat:description = "The verifying date of the data meaning date and time for which it is valid" ;
	float vtim(time) ;
		vtim:long_name = "Verify Time (GMT)" ;
		vtim:units = "hours" ;
		vtim:description = "The verifying time of the data meaning date and time for which it is valid" ;
	float u_total(time, levels, domains) ;
		u_total:long_name = "zonal wind component - total tendencies" ;
		u_total:units = "m/s/s" ;
	float u_physics(time, levels, domains) ;
		u_physics:long_name = "zonal wind component - physical tendencies" ;
		u_physics:units = "m/s/s" ;
	float v_total(time, levels, domains) ;
		v_total:long_name = "meridional wind component - total tendencies" ;
		v_total:units = "m/s/s" ;
	float v_physics(time, levels, domains) ;
		v_physics:long_name = "meridional wind component - physical tendencies" ;
		v_physics:units = "m/s/s" ;
	float T_total(time, levels, domains) ;
		T_total:long_name = "Temperature - total tendencies" ;
		T_total:units = "K/s" ;
	float T_physics(time, levels, domains) ;
		T_physics:long_name = "Temperature - physical tendencies" ;
		T_physics:units = "K/s" ;
	float q_total(time, levels, domains) ;
		q_total:long_name = "specific humidity - total tendencies" ;
		q_total:units = "kg/kg/s" ;
	float q_physics(time, levels, domains) ;
		q_physics:long_name = "specific humidity - physical tendencies" ;
		q_physics:units = "kg/kg/s" ;

// global attributes:
		:date = "Tue Nov  3 20:18:29 2015" ;
		:facility_id = "X30" ;
		:site_id = "External Data" ;
		:data_level = "c1" ;
		:data_description = "Diagnostic data derived from ECMWF model runs for ARM analysis provided by ECMWF" ;
		:data_description1 = "This file contains the total and physical tendencies for u (zonal wind component), v (meridional wind component) , T (temperature) and q (specific humidity)" ;
		:averaging_interval = "60 minutes" ;
		:averaging_interval_comment = "All data represents horizontal averages over the domains and therefore cannot easily be compared to single point measurements." ;
		:averaging_interval_comment1 = "The tendencies represent the tendency from the last to the current hour." ;
		:reference_1 = "The ECMWF home page - http://www.ecmwf.int/" ;
		:reference_2 = "ECMWF Publications listing: http://www.ecmwf.int/pressroom/publications.html" ;
		:missing_value = -9999.f ;
		:version = "$State: xdc-ecmwf-9.0-0 $" ;
		:IDL_Version = "Coded in IDL (x86 / linux / unix / 6.2)" ;
		:command_Line = "ecmwf_ingest -i 20151001 -type ten -location dar" ;
		:zeb_platform = "twpecmwftenX30.c1" ;
		:input_files = "twpecmwften06X30.00.20151001.000000.raw.asc, twpecmwften28X30.00.20151001.000000.raw.asc, twpecmwften50X30.00.20151001.000000.raw.asc" ;
		:input_datastreams = "twpecmwfX30.00" ;
}