netcdf tmpassistengineerM1.a1.20140913.000000 {
dimensions:
	time = UNLIMITED ; // (9419 currently)
variables:
	int base_time ;
		base_time:string = "2014-09-13 00:00:00 0:00" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
		base_time:ancillary_variables = "time_offset" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2014-09-13 00:00:00 0:00" ;
		time_offset:ancillary_variables = "base_time" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2014-09-13 00:00:00 0:00" ;
		time:calendar = "gregorian" ;
		time:standard_name = "time" ;
	float itx_cpu_heatsink_temp(time) ;
		itx_cpu_heatsink_temp:long_name = "Itx CPU heatsink temperature" ;
		itx_cpu_heatsink_temp:units = "degC" ;
		itx_cpu_heatsink_temp:missing_value = -9999.f ;
	float cooler_block_temp(time) ;
		cooler_block_temp:long_name = "Cooler block temperature" ;
		cooler_block_temp:units = "degC" ;
		cooler_block_temp:missing_value = -9999.f ;
	float elec_box_temp(time) ;
		elec_box_temp:long_name = "Electronics box temperature" ;
		elec_box_temp:units = "degC" ;
		elec_box_temp:missing_value = -9999.f ;
	float mirror_motor_temp(time) ;
		mirror_motor_temp:long_name = "Scene mirror motor temperature" ;
		mirror_motor_temp:units = "degC" ;
		mirror_motor_temp:missing_value = -9999.f ;
	float power_supply_box_temp(time) ;
		power_supply_box_temp:long_name = "Power supply box temperature" ;
		power_supply_box_temp:units = "degC" ;
		power_supply_box_temp:missing_value = -9999.f ;
	float air_near_fts_temp(time) ;
		air_near_fts_temp:long_name = "Temperature of air near FTS fan inlet" ;
		air_near_fts_temp:units = "degC" ;
		air_near_fts_temp:missing_value = -9999.f ;
		air_near_fts_temp:comment = "Measured jointly with RH by a T/RH sensor" ;
	float air_near_fts_rh(time) ;
		air_near_fts_rh:long_name = "Relative humidity of air near FTS fan inlet" ;
		air_near_fts_rh:units = "%" ;
		air_near_fts_rh:missing_value = -9999.f ;
	float air_near_fts_temp2(time) ;
		air_near_fts_temp2:long_name = "Temperature of air near FTS fan inlet, auxiliary" ;
		air_near_fts_temp2:units = "degC" ;
		air_near_fts_temp2:missing_value = -9999.f ;
		air_near_fts_temp2:comment = "Measured by a thermistor on a PCB in the same box as the T/RH sensor, so serves as a good check on this measurement." ;
	float port2_bb_temp(time) ;
		port2_bb_temp:long_name = "Second port blackbody temperature" ;
		port2_bb_temp:units = "degC" ;
		port2_bb_temp:missing_value = -9999.f ;
	float fts_enclosure_temp(time) ;
		fts_enclosure_temp:long_name = "FTS enclosure temperature" ;
		fts_enclosure_temp:units = "degC" ;
		fts_enclosure_temp:missing_value = -9999.f ;
	float fts_enclosure_rh(time) ;
		fts_enclosure_rh:long_name = "Humidity within FTS enclosure" ;
		fts_enclosure_rh:units = "%" ;
		fts_enclosure_rh:missing_value = -9999.f ;
	float front_end_enclosure_temp(time) ;
		front_end_enclosure_temp:long_name = "Front end enclosure temperature" ;
		front_end_enclosure_temp:units = "degC" ;
		front_end_enclosure_temp:missing_value = -9999.f ;
	float annotator_5v(time) ;
		annotator_5v:long_name = "Annotator 5 volt supply" ;
		annotator_5v:units = "V" ;
		annotator_5v:missing_value = -9999.f ;
	float itx_pc_12v(time) ;
		itx_pc_12v:long_name = "ITX PC 12 volt supply" ;
		itx_pc_12v:units = "V" ;
		itx_pc_12v:missing_value = -9999.f ;
	float preamp_15v(time) ;
		preamp_15v:long_name = "Pre-amp 15 volt supply" ;
		preamp_15v:units = "V" ;
		preamp_15v:missing_value = -9999.f ;
	float fts_15v(time) ;
		fts_15v:long_name = "FTS 15 volt supply" ;
		fts_15v:units = "V" ;
		fts_15v:missing_value = -9999.f ;
	float bb_cooler_24v(time) ;
		bb_cooler_24v:long_name = "Blackbody and detector cooler 24 volt supply" ;
		bb_cooler_24v:units = "V" ;
		bb_cooler_24v:missing_value = -9999.f ;
	float mirror_motor_24v(time) ;
		mirror_motor_24v:long_name = "Motor 24 volt supply" ;
		mirror_motor_24v:units = "V" ;
		mirror_motor_24v:missing_value = -9999.f ;
	short highest_alert(time) ;
		highest_alert:long_name = "Highest alert reported by any housekeeping one-wire sensor" ;
		highest_alert:units = "unitless" ;
		highest_alert:flag_values = 0s, 1s, 2s, 3s, 4s ;
		highest_alert:flag_meanings = "normal not_yet_read no_response warning critical" ;
	float lat ;
		lat:long_name = "North latitude" ;
		lat:units = "degree_N" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
		lat:standard_name = "latitude" ;
	float lon ;
		lon:long_name = "East longitude" ;
		lon:units = "degree_E" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
		lon:standard_name = "longitude" ;
	float alt ;
		alt:long_name = "Altitude above mean sea level" ;
		alt:units = "m" ;
		alt:standard_name = "altitude" ;

// global attributes:
		:command_line = "assist_ingest -s tmp -f M1" ;
		:Conventions = "ARM-1.0" ;
		:process_version = "ingest-assist-2.0-0.el6" ;
		:dod_version = "assistengineer-a1-1.0" ;
		:input_source = "/data/collection/tmp/tmpassistM1.00/2014_09_13_00_21_23_PROCESSED.piz" ;
		:site_id = "tmp" ;
		:platform_id = "assistengineer" ;
		:facility_id = "M1" ;
		:data_level = "a1" ;
		:location_description = "Biogenic Aerosols - Effect on Clouds and Climate (BAECC), Hyytiala, Finland" ;
		:datastream = "tmpassistengineerM1.a1" ;
		:datastream_description = "This datastream encapsulates the contents of the ASSIST \"hkp\" (housekeeping) files. The reported values are from one-wire sensors that capture and report a variety of system measurements including T, RH, and voltages." ;
		:history = "created by user dsmgr on machine tin at 2014-09-13 03:26:09, using ingest-assist-2.0-0.el6" ;
}