netcdf sgptbscpcC1.b1.20240228.203900 {
dimensions:
	time = UNLIMITED ; // (12061 currently)
	num_cpc = 1 ;
variables:
	int base_time ;
		base_time:string = "2024-02-28 00:00:00 0:00" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
		base_time:ancillary_variables = "time_offset" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2024-02-28 00:00:00 0:00" ;
		time_offset:ancillary_variables = "base_time" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2024-02-28 00:00:00 0:00" ;
		time:standard_name = "time" ;
	float temperature(time, num_cpc) ;
		temperature:long_name = "Temperature from iMet sensor" ;
		temperature:units = "degC" ;
		temperature:valid_min = -95.f ;
		temperature:valid_max = 50.f ;
		temperature:missing_value = -9999.f ;
		temperature:standard_name = "air_temperature" ;
		temperature:ancillary_variables = "qc_temperature" ;
	int qc_temperature(time, num_cpc) ;
		qc_temperature:long_name = "Quality check results on variable: Temperature from iMet sensor" ;
		qc_temperature:units = "1" ;
		qc_temperature:standard_name = "quality_flag" ;
		qc_temperature:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_temperature:flag_method = "bit" ;
		qc_temperature:bit_1_description = "Value is equal to missing_value." ;
		qc_temperature:bit_1_assessment = "Bad" ;
		qc_temperature:bit_2_description = "Value is less than valid_min." ;
		qc_temperature:bit_2_assessment = "Bad" ;
		qc_temperature:bit_3_description = "Value is greater than valid_max." ;
		qc_temperature:bit_3_assessment = "Bad" ;
	float relative_humidity(time, num_cpc) ;
		relative_humidity:long_name = "Relative humidity from iMet sensor" ;
		relative_humidity:units = "%" ;
		relative_humidity:valid_min = 0.f ;
		relative_humidity:valid_max = 105.f ;
		relative_humidity:missing_value = -9999.f ;
		relative_humidity:standard_name = "relative_humidity" ;
		relative_humidity:ancillary_variables = "qc_relative_humidity" ;
	int qc_relative_humidity(time, num_cpc) ;
		qc_relative_humidity:long_name = "Quality check results on variable: Relative humidity from iMet sensor" ;
		qc_relative_humidity:units = "1" ;
		qc_relative_humidity:standard_name = "quality_flag" ;
		qc_relative_humidity:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_relative_humidity:flag_method = "bit" ;
		qc_relative_humidity:bit_1_description = "Value is equal to missing_value." ;
		qc_relative_humidity:bit_1_assessment = "Bad" ;
		qc_relative_humidity:bit_2_description = "Value is less than valid_min." ;
		qc_relative_humidity:bit_2_assessment = "Bad" ;
		qc_relative_humidity:bit_3_description = "Value is greater than valid_max." ;
		qc_relative_humidity:bit_3_assessment = "Bad" ;
	float imet_pressure(time, num_cpc) ;
		imet_pressure:long_name = "Pressure from iMet sensor" ;
		imet_pressure:units = "hPa" ;
		imet_pressure:valid_min = 10.f ;
		imet_pressure:valid_max = 1200.f ;
		imet_pressure:missing_value = -9999.f ;
		imet_pressure:standard_name = "air_pressure" ;
		imet_pressure:ancillary_variables = "qc_imet_pressure" ;
	int qc_imet_pressure(time, num_cpc) ;
		qc_imet_pressure:long_name = "Quality check results on variable: Pressure from iMet sensor" ;
		qc_imet_pressure:units = "1" ;
		qc_imet_pressure:standard_name = "quality_flag" ;
		qc_imet_pressure:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_imet_pressure:flag_method = "bit" ;
		qc_imet_pressure:bit_1_description = "Value is equal to missing_value." ;
		qc_imet_pressure:bit_1_assessment = "Bad" ;
		qc_imet_pressure:bit_2_description = "Value is less than valid_min." ;
		qc_imet_pressure:bit_2_assessment = "Bad" ;
		qc_imet_pressure:bit_3_description = "Value is greater than valid_max." ;
		qc_imet_pressure:bit_3_assessment = "Bad" ;
	float gps_pressure(time, num_cpc) ;
		gps_pressure:long_name = "GPS pressure from iMet sensor" ;
		gps_pressure:units = "hPa" ;
		gps_pressure:valid_min = 10.f ;
		gps_pressure:valid_max = 1200.f ;
		gps_pressure:missing_value = -9999.f ;
		gps_pressure:standard_name = "air_pressure" ;
		gps_pressure:ancillary_variables = "qc_gps_pressure" ;
	int qc_gps_pressure(time, num_cpc) ;
		qc_gps_pressure:long_name = "Quality check results on variable: GPS pressure from iMet sensor" ;
		qc_gps_pressure:units = "1" ;
		qc_gps_pressure:standard_name = "quality_flag" ;
		qc_gps_pressure:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_gps_pressure:flag_method = "bit" ;
		qc_gps_pressure:bit_1_description = "Value is equal to missing_value." ;
		qc_gps_pressure:bit_1_assessment = "Bad" ;
		qc_gps_pressure:bit_2_description = "Value is less than valid_min." ;
		qc_gps_pressure:bit_2_assessment = "Bad" ;
		qc_gps_pressure:bit_3_description = "Value is greater than valid_max." ;
		qc_gps_pressure:bit_3_assessment = "Bad" ;
	float total_concentration(time, num_cpc) ;
		total_concentration:long_name = "Total number concentration from CPC for the aerosol particles larger than 10 nm" ;
		total_concentration:units = "1/cm^3" ;
		total_concentration:valid_min = 0.f ;
		total_concentration:valid_max = 20000.f ;
		total_concentration:missing_value = -9999.f ;
		total_concentration:standard_name = "number_concentration_of_ambient_aerosol_in_air" ;
		total_concentration:ancillary_variables = "qc_total_concentration" ;
	int qc_total_concentration(time, num_cpc) ;
		qc_total_concentration:long_name = "Quality check results on variable: Total number concentration from CPC for the aerosol particles larger than 10 nm" ;
		qc_total_concentration:units = "1" ;
		qc_total_concentration:standard_name = "quality_flag" ;
		qc_total_concentration:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_total_concentration:flag_method = "bit" ;
		qc_total_concentration:bit_1_description = "Value is equal to missing_value." ;
		qc_total_concentration:bit_1_assessment = "Bad" ;
		qc_total_concentration:bit_2_description = "Value is less than valid_min." ;
		qc_total_concentration:bit_2_assessment = "Bad" ;
		qc_total_concentration:bit_3_description = "Value is greater than valid_max." ;
		qc_total_concentration:bit_3_assessment = "Bad" ;
	float lat(time, num_cpc) ;
		lat:long_name = "North latitude from iMet sensor" ;
		lat:units = "degree_N" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
		lat:missing_value = -9999.f ;
		lat:standard_name = "latitude" ;
	float lon(time, num_cpc) ;
		lon:long_name = "East longitude from iMet sensor" ;
		lon:units = "degree_E" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
		lon:missing_value = -9999.f ;
		lon:standard_name = "longitude" ;
	float alt(time, num_cpc) ;
		alt:long_name = "Altitude above mean sea level from iMet sensor" ;
		alt:units = "m" ;
		alt:missing_value = -9999.f ;
		alt:standard_name = "altitude" ;

// global attributes:
		:command_line = "tbscpc_ingest -s sgp -f C1" ;
		:Conventions = "ARM-1.3" ;
		:process_version = "ingest-tbscpc-2.3-0.el7" ;
		:dod_version = "tbscpc-b1-3.0" ;
		:input_source = "/data/collection/sgp/sgptbscpcC1.01/sgp.tbs.cpc.20240228.203900.txt" ;
		:site_id = "sgp" ;
		:platform_id = "tbscpc" ;
		:facility_id = "C1" ;
		:data_level = "b1" ;
		:location_description = "Southern Great Plains (SGP), Lamont, Oklahoma" ;
		:datastream = "sgptbscpcC1.b1" ;
		:doi = "10.5439/1582131" ;
		:history = "created by user dsmgr on machine prod-proc3.adc.arm.gov at 2024-03-04 21:39:01, using ingest-tbscpc-2.3-0.el7" ;
}