netcdf sgpmwrtipB6.a0.981028.000023 {
dimensions:
	time = UNLIMITED ; // (8040 currently)
variables:
	int base_time ;
		base_time:string = "28-Oct-98,0:00:23 GMT" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 1998-10-28 00:00:23 0:00" ;
	float actaz(time) ;
		actaz:long_name = "Actual Azimuth" ;
		actaz:units = "deg" ;
		actaz:field_index = "1" ;
	float actel(time) ;
		actel:long_name = "Actual elevation angle" ;
		actel:units = "deg" ;
		actel:field_index = "2" ;
	float bb23(time) ;
		bb23:long_name = "23.8 GHz Blackbody signal" ;
		bb23:units = "counts" ;
		bb23:field_index = "3" ;
	float bbn23(time) ;
		bbn23:long_name = "23.8 GHz blackbody+noise injection signal" ;
		bbn23:units = "counts" ;
		bbn23:field_index = "4" ;
	float bb31(time) ;
		bb31:long_name = "31.4 GHz blackbody" ;
		bb31:units = "counts" ;
		bb31:field_index = "5" ;
	float bbn31(time) ;
		bbn31:long_name = "31.4 GHz blackbody+noise injection signal" ;
		bbn31:units = "counts" ;
		bbn31:field_index = "6" ;
	float tnd23I(time) ;
		tnd23I:long_name = "Noise injection temp at 23.8 GHz derived from this tip " ;
		tnd23I:units = "K" ;
		tnd23I:field_index = "7" ;
	float tnd31I(time) ;
		tnd31I:long_name = "Noise injection temp at 31.4 GHz derived from this tip" ;
		tnd31I:units = "K" ;
		tnd31I:field_index = "8" ;
	float tkxc(time) ;
		tkxc:long_name = "Mixer kinetic (physical) temperature" ;
		tkxc:units = "K" ;
		tkxc:field_index = "9" ;
	float tipsky23(time) ;
		tipsky23:long_name = "23.8 GHz sky signal" ;
		tipsky23:units = "counts" ;
		tipsky23:field_index = "10" ;
	float tipsky31(time) ;
		tipsky31:long_name = "31.4 GHz sky signal" ;
		tipsky31:units = "counts" ;
		tipsky31:field_index = "11" ;
	float r23(time) ;
		r23:long_name = "23.8 GHz goodness-of-fit coefficient" ;
		r23:units = " " ;
		r23:field_index = "12" ;
	float r31(time) ;
		r31:long_name = "31.4 GHz goodness-of-fit coefficient" ;
		r31:units = " " ;
		r31:field_index = "13" ;
	float lat ;
		lat:long_name = "north latitude" ;
		lat:units = "degrees" ;
		lat:valid_range = -90.f, 90.f ;
	float lon ;
		lon:long_name = "east longitude" ;
		lon:units = "degrees" ;
		lon:valid_range = -180.f, 180.f ;
	float alt ;
		alt:long_name = "altitude" ;
		alt:units = "meters above Mean Sea Level" ;

// global attributes:
		:ingest-software = " mwr_ingest.c,v 1.1 1998/03/26 01:00:16 gaustad Exp gaustad $" ;
		:proc-level = "a0" ;
		:input-source = "mwr86:/data/raw/mwrB6/in/83010000.018" ;
		:site-id = "sgp" ;
		:facility-id = "B6 : Purcell" ;
		:sds-mode = "production" ;
		:sample-int = "90 seconds\n",
			"signed\n",
			"to ea" ;
		:averaging-int = "None." ;
		:serial-number = "MWR015" ;
		:missing-data = "-9999" ;
		:comment = "The time assigned to each data point indicates the end of any\n",
			"period of averaging of the geophysical data.\n",
			"\n",
			"Altitude is in meters above Mean Sea Level\n",
			"Using LOS1 mode" ;
		:field_indices = "Each field contains an attribute named \"field_index\".\n",
			"This index is unique to each field and contains a value\n",
			"from 1 to N (where N is the number of fields in platform)." ;
		:resolution_description = "The resolution field attributes refer to the number of significant\n",
			"digits relative to the decimal point that should be used in\n",
			"calculations.  Using fewer digits might result in greater uncertainty;\n",
			"using a larger number of digits should have no effect and thus is\n",
			"unnecessary.  However, analyses based on differences in values with\n",
			"a larger number of significant digits than indicated could lead to\n",
			"erroneous results or misleading scientific conclusions.\n",
			"\n",
			"resolution for lat= 0.001\n",
			"resolution for lon = 0.001\n",
			"resolution for alt = 1" ;
		:zeb_platform = "sgpmwrtipB6.a0" ;
		:history = "created by Zeb DataStore, 28-Oct-98,3:27:19, $RCSfile: DFA_NetCDF.c,v $ $Revision: 3.47 $\n",
			"" ;
}