netcdf sgpaafpopsiU3.b1.20211116.143811 { dimensions: time = UNLIMITED ; // (5266 currently) variables: int base_time ; base_time:string = "2021-11-16 00:00:00 0:00" ; base_time:long_name = "Base time in Epoch" ; base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ; base_time:ancillary_variables = "time_offset" ; double time_offset(time) ; time_offset:long_name = "Time offset from base_time" ; time_offset:units = "seconds since 2021-11-16 00:00:00 0:00" ; time_offset:ancillary_variables = "base_time" ; double time(time) ; time:long_name = "Time offset from midnight" ; time:units = "seconds since 2021-11-16 00:00:00 0:00" ; time:calendar = "gregorian" ; time:standard_name = "time" ; float total_concentration(time) ; total_concentration:long_name = "Total number concentration from POPS including anything less than 135 nm" ; total_concentration:units = "1/cm^3" ; total_concentration:valid_min = 0.f ; total_concentration:valid_max = 4000.f ; total_concentration:missing_value = -9999.f ; total_concentration:ancillary_variables = "qc_total_concentration" ; int qc_total_concentration(time) ; qc_total_concentration:long_name = "Quality check results on variable: Total number concentration from POPS including anything less than 135 nm" ; qc_total_concentration:units = "1" ; qc_total_concentration:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_total_concentration:flag_method = "bit" ; qc_total_concentration:bit_1_description = "Value is equal to missing_value." ; qc_total_concentration:bit_1_assessment = "Bad" ; qc_total_concentration:bit_2_description = "Value is less than valid_min." ; qc_total_concentration:bit_2_assessment = "Bad" ; qc_total_concentration:bit_3_description = "Value is greater than valid_max." ; qc_total_concentration:bit_3_assessment = "Bad" ; qc_total_concentration:standard_name = "quality_flag" ; float temperature(time) ; temperature:long_name = "Temperature from POPS sensor" ; temperature:units = "degC" ; temperature:valid_max = 65.f ; temperature:valid_min = 25.f ; temperature:missing_value = -9999.f ; temperature:standard_name = "air_temperature" ; temperature:ancillary_variables = "qc_temperature" ; int qc_temperature(time) ; qc_temperature:long_name = "Quality check results on variable: Temperature from POPS sensor" ; qc_temperature:units = "1" ; qc_temperature:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_temperature:flag_method = "bit" ; qc_temperature:bit_1_description = "Value is equal to missing_value." ; qc_temperature:bit_1_assessment = "Bad" ; qc_temperature:bit_2_description = "Value is less than valid_min." ; qc_temperature:bit_2_assessment = "Bad" ; qc_temperature:bit_3_description = "Value is greater than valid_max." ; qc_temperature:bit_3_assessment = "Bad" ; qc_temperature:standard_name = "quality_flag" ; float pressure(time) ; pressure:long_name = "Pressure from POPS sensor" ; pressure:units = "hPa" ; pressure:missing_value = -9999.f ; pressure:standard_name = "air_pressure" ; float dn_135_150(time) ; dn_135_150:long_name = "Aerosol number concentration between 135 nm to 150 nm" ; dn_135_150:units = "1/cm^3" ; dn_135_150:missing_value = -9999.f ; float dn_150_170(time) ; dn_150_170:long_name = "Aerosol number concentration between 150 nm to 170 nm" ; dn_150_170:units = "1/cm^3" ; dn_150_170:missing_value = -9999.f ; float dn_170_195(time) ; dn_170_195:long_name = "Aerosol number concentration between 170 nm to 195 nm" ; dn_170_195:units = "1/cm^3" ; dn_170_195:missing_value = -9999.f ; float dn_195_220(time) ; dn_195_220:long_name = "Aerosol number concentration between 195 nm to 220 nm" ; dn_195_220:units = "1/cm^3" ; dn_195_220:missing_value = -9999.f ; float dn_220_260(time) ; dn_220_260:long_name = "Aerosol number concentration between 220 nm to 260 nm" ; dn_220_260:units = "1/cm^3" ; dn_220_260:missing_value = -9999.f ; float dn_260_335(time) ; dn_260_335:long_name = "Aerosol number concentration between 260 nm to 335 nm" ; dn_260_335:units = "1/cm^3" ; dn_260_335:missing_value = -9999.f ; float dn_335_510(time) ; dn_335_510:long_name = "Aerosol number concentration between 335 nm to 510 nm" ; dn_335_510:units = "1/cm^3" ; dn_335_510:missing_value = -9999.f ; float dn_510_705(time) ; dn_510_705:long_name = "Aerosol number concentration between 510 nm to 705 nm" ; dn_510_705:units = "1/cm^3" ; dn_510_705:missing_value = -9999.f ; float dn_705_1380(time) ; dn_705_1380:long_name = "Aerosol number concentration between 705 nm to 1380 nm" ; dn_705_1380:units = "1/cm^3" ; dn_705_1380:missing_value = -9999.f ; float dn_1380_1760(time) ; dn_1380_1760:long_name = "Aerosol number concentration between 1380 nm to 1760 nm" ; dn_1380_1760:units = "1/cm^3" ; dn_1380_1760:missing_value = -9999.f ; float dn_1760_2550(time) ; dn_1760_2550:long_name = "Aerosol number concentration between 1760 nm to 2550 nm" ; dn_1760_2550:units = "1/cm^3" ; dn_1760_2550:missing_value = -9999.f ; float dn_2550_3615(time) ; dn_2550_3615:long_name = "Aerosol number concentration between 2550 nm to 3615 nm" ; dn_2550_3615:units = "1/cm^3" ; dn_2550_3615:missing_value = -9999.f ; double lat(time) ; lat:long_name = "North latitude" ; lat:units = "degree_N" ; lat:valid_min = 36.51 ; lat:valid_max = 36.85 ; lat:missing_value = -9999. ; lat:standard_name = "latitude" ; lat:source = "sgpaafnavaimsU3.a1:lat" ; lat:ancillary_variables = "qc_lat" ; int qc_lat(time) ; qc_lat:long_name = "Quality check results on variable: North latitude" ; qc_lat:units = "1" ; qc_lat:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_lat:flag_method = "bit" ; qc_lat:bit_1_description = "Value is equal to missing_value." ; qc_lat:bit_1_assessment = "Bad" ; qc_lat:bit_2_description = "Value is less than valid_min." ; qc_lat:bit_2_assessment = "Bad" ; qc_lat:bit_3_description = "Value is greater than valid_max." ; qc_lat:bit_3_assessment = "Bad" ; qc_lat:standard_name = "quality_flag" ; double lon(time) ; lon:long_name = "East longitude" ; lon:units = "degree_E" ; lon:valid_min = -97.6 ; lon:valid_max = -97.26 ; lon:missing_value = -9999. ; lon:standard_name = "longitude" ; lon:source = "sgpaafnavaimsU3.a1:lon" ; lon:ancillary_variables = "qc_lon" ; int qc_lon(time) ; qc_lon:long_name = "Quality check results on variable: East longitude" ; qc_lon:units = "1" ; qc_lon:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_lon:flag_method = "bit" ; qc_lon:bit_1_description = "Value is equal to missing_value." ; qc_lon:bit_1_assessment = "Bad" ; qc_lon:bit_2_description = "Value is less than valid_min." ; qc_lon:bit_2_assessment = "Bad" ; qc_lon:bit_3_description = "Value is greater than valid_max." ; qc_lon:bit_3_assessment = "Bad" ; qc_lon:standard_name = "quality_flag" ; double alt(time) ; alt:long_name = "Altitude above mean sea level" ; alt:units = "m" ; alt:valid_min = 300. ; alt:valid_max = 2000. ; alt:missing_value = -9999. ; alt:standard_name = "altitude" ; alt:source = "sgpaafnavaimsU3.a1:alt" ; alt:ancillary_variables = "qc_alt" ; int qc_alt(time) ; qc_alt:long_name = "Quality check results on variable: Altitude above mean sea level" ; qc_alt:units = "1" ; qc_alt:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_alt:flag_method = "bit" ; qc_alt:bit_1_description = "Value is equal to missing_value." ; qc_alt:bit_1_assessment = "Bad" ; qc_alt:bit_2_description = "Value is less than valid_min." ; qc_alt:bit_2_assessment = "Bad" ; qc_alt:bit_3_description = "Value is greater than valid_max." ; qc_alt:bit_3_assessment = "Bad" ; qc_alt:standard_name = "quality_flag" ; // global attributes: :command_line = "aafpopsicorr -s sgp -f U3" ; :Conventions = "ARM-1.3" ; :process_version = "ingest-aafpopsicorr-1.0-1.el7" ; :dod_version = "aafpopsi-b1-1.1" ; :input_datastreams = "sgpaafnavU3.b1 : 1.6 : 20211116.143810\n", "sgpaafpopsiU3.a1 : 1.0 : 20211116.140025" ; :site_id = "sgp" ; :platform_id = "aafpopsi" ; :facility_id = "U3" ; :data_level = "b1" ; :location_description = "Southern Great Plains (SGP), TigerShark Unmanned Aerial System" ; :datastream = "sgpaafpopsiU3.b1" ; :doi = "10.5439/1660726" ; :history = "created by user dsmgr on machine prod-proc2.adc.arm.gov at 2023-02-22 18:05:02, using ingest-aafpopsicorr-1.0-1.el7" ; }