netcdf pvcaoshtdmaS1.a1.20130308.005734 {
dimensions:
	time = UNLIMITED ; // (10 currently)
	bin = 60 ;
variables:
	int base_time ;
		base_time:string = "7-Mar-2013,18:12:38 GMT" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2013-03-07 18:12:38 0:00" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2013-03-08 00:00:00 0:00" ;
	float bin(bin) ;
		bin:long_name = "Bin number" ;
		bin:units = "unitless" ;
	int dry_diameter_setting(time) ;
		dry_diameter_setting:long_name = "Dry aerosol diameter size instrument setting" ;
		dry_diameter_setting:units = "nm" ;
		dry_diameter_setting:valid_min = 25 ;
		dry_diameter_setting:valid_max = 500 ;
		dry_diameter_setting:missing_value = -9999 ;
	float dry_rh_setting(time) ;
		dry_rh_setting:long_name = "Dry aerosol particle relative humidity instrument setting" ;
		dry_rh_setting:units = "%" ;
		dry_rh_setting:valid_min = 0.f ;
		dry_rh_setting:valid_max = 30.f ;
		dry_rh_setting:missing_value = -9999.f ;
	float humid_rh(time) ;
		humid_rh:long_name = "Humid aerosol particle relative humidity" ;
		humid_rh:units = "%" ;
		humid_rh:valid_min = 80.f ;
		humid_rh:valid_max = 100.f ;
		humid_rh:missing_value = -9999.f ;
	float scan_min_diameter_setting(time) ;
		scan_min_diameter_setting:long_name = "Minimum aerosol particle diameter instrument setting" ;
		scan_min_diameter_setting:units = "nm" ;
		scan_min_diameter_setting:valid_min = 25.f ;
		scan_min_diameter_setting:valid_max = 500.f ;
		scan_min_diameter_setting:missing_value = -9999.f ;
	float scan_max_diameter_setting(time) ;
		scan_max_diameter_setting:long_name = "Maximum aerosol particle diameter instrument setting" ;
		scan_max_diameter_setting:units = "nm" ;
		scan_max_diameter_setting:valid_min = 25.f ;
		scan_max_diameter_setting:valid_max = 600.f ;
		scan_max_diameter_setting:missing_value = -9999.f ;
	float sample_flow(time) ;
		sample_flow:long_name = "Aerosol sample flow rate" ;
		sample_flow:units = "lpm" ;
		sample_flow:valid_min = 0.f ;
		sample_flow:valid_max = 3.f ;
		sample_flow:missing_value = -9999.f ;
	int scan_time_setting(time) ;
		scan_time_setting:long_name = "Humidified DMA scanning time instrument setting" ;
		scan_time_setting:units = "s" ;
		scan_time_setting:valid_min = 1 ;
		scan_time_setting:valid_max = 60 ;
		scan_time_setting:missing_value = -9999 ;
	int num_bins(time) ;
		num_bins:long_name = "Number of distribution bins" ;
		num_bins:units = "unitless" ;
		num_bins:valid_min = 0 ;
		num_bins:valid_max = 100 ;
		num_bins:missing_value = -9999 ;
	int scan_type(time) ;
		scan_type:long_name = "Sampling mode scan type" ;
		scan_type:units = "unitless" ;
		scan_type:flag_values = 0, 1 ;
		scan_type:flag_meanings = "down, up" ;
		scan_type:missing_value = -9999 ;
	int atomizer(time) ;
		atomizer:long_name = "Atomizer calibration status" ;
		atomizer:units = "unitless" ;
		atomizer:flag_values = 0, 1 ;
		atomizer:flag_meanings = "off, on" ;
		atomizer:missing_value = -9999 ;
	float total_concentration(time) ;
		total_concentration:long_name = "Total scan concentration over all bins" ;
		total_concentration:units = "1/cm^3" ;
		total_concentration:valid_min = 0.f ;
		total_concentration:valid_max = 6000.f ;
		total_concentration:missing_value = -9999.f ;
	float bin_center(time, bin) ;
		bin_center:long_name = "Bin center value" ;
		bin_center:units = "nm" ;
		bin_center:missing_value = -9999.f ;
	float bin_width(time, bin) ;
		bin_width:long_name = "Bin width" ;
		bin_width:units = "nm" ;
		bin_width:missing_value = -9999.f ;
	float aerosol_concentration(time, bin) ;
		aerosol_concentration:long_name = "Concentration of aerosol" ;
		aerosol_concentration:units = "1/cm^3" ;
		aerosol_concentration:valid_min = 0.f ;
		aerosol_concentration:valid_max = 1000.f ;
		aerosol_concentration:missing_value = -9999.f ;
	float lat ;
		lat:long_name = "North latitude" ;
		lat:units = "degree_N" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
	float lon ;
		lon:long_name = "East longitude" ;
		lon:units = "degree_E" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
	float alt ;
		alt:long_name = "Altitude above mean sea level" ;
		alt:units = "m" ;

// global attributes:
		:command_line = "aoshtdma_ingest -s pvc -f S1 -d" ;
		:process_version = "ingest-aoshtdma-1.0-1.el5" ;
		:dod_version = "aoshtdma-a1-2.0" ;
		:site_id = "pvc" ;
		:facility_id = "S1: Cape Cod, Massachusetts" ;
		:input_source = "/data/collection/pvc/pvcaoshtdmaS1.00/pvcmaosas1.htdma.05m.00.20130307.181127.raw.tsv" ;
		:sampling_interval = "" ;
		:averaging_interval = "" ;
		:resolution_description = "The resolution field attributes refer to the number of significant digits relative to the decimal point that should be used in calculations. Using fewer digits might result in greater uncertainty. Using a larger number of digits should have no effect and thus is unnecessary. However, analyses based on differences in values with a larger number of significant digits than indicated could lead to erroneous results or misleading scientific conclusions.\n",
			"\n",
			"resolution for lat = 0.001\n",
			"resolution for lon = 0.001\n",
			"resolution for alt = 1" ;
		:serial_number = "" ;
		:zeb_platform = "pvcaoshtdmaS1.a1" ;
		:history = "created by user dsmgr on machine gold at 1-Apr-2013,19:50:04, using $State: zebra-zeblib-4.23-0.el5 $" ;
}