netcdf nsacmhC1.a1.20030528.000000 {
dimensions:
	time = UNLIMITED ; // (79 currently)
variables:
	int base_time ;
		base_time:string = "27-May-2003,23:10:00 GMT" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2003-05-27 23:10:00 0:00" ;
	float air_temp(time) ;
		air_temp:long_name = "Air temperature" ;
		air_temp:units = "degrees C" ;
		air_temp:missing_value = -9999.f ;
	float dew_pt_temp(time) ;
		dew_pt_temp:long_name = "Dew point temperature" ;
		dew_pt_temp:units = "degrees C" ;
		dew_pt_temp:missing_value = -9999.f ;
	float relh(time) ;
		relh:long_name = "Relative humidity" ;
		relh:units = "%RH" ;
		relh:missing_value = -9999.f ;
	short air_temp_out_of_range_error(time) ;
		air_temp_out_of_range_error:long_name = "Air temperature out of range error" ;
		air_temp_out_of_range_error:units = "unitless" ;
		air_temp_out_of_range_error:missing_value = -9999s ;
		air_temp_out_of_range_error:details = "0 = no error, 1 = error" ;
	short dew_pt_temp_out_of_range_error(time) ;
		dew_pt_temp_out_of_range_error:long_name = "Dew point temperature out of range error" ;
		dew_pt_temp_out_of_range_error:units = "unitless" ;
		dew_pt_temp_out_of_range_error:missing_value = -9999s ;
		dew_pt_temp_out_of_range_error:details = "0 = no error, 1 = error" ;
	short relh_out_of_range_error(time) ;
		relh_out_of_range_error:long_name = "Relative humidity out of range error" ;
		relh_out_of_range_error:units = "unitless" ;
		relh_out_of_range_error:missing_value = -9999s ;
		relh_out_of_range_error:details = "0 = no error, 1 = error" ;
	float read_timeout_error(time) ;
		read_timeout_error:long_name = "Read timeout error" ;
		read_timeout_error:units = "unitless" ;
		read_timeout_error:missing_value = -9999.f ;
		read_timeout_error:details = "0 = no error, 1 = error" ;
	float serial_read_error(time) ;
		serial_read_error:long_name = "Serial port read error" ;
		serial_read_error:units = "unitless" ;
		serial_read_error:missing_value = -9999.f ;
		serial_read_error:details = "0 = no error, 1 = error" ;
	float lat ;
		lat:long_name = "north latitude" ;
		lat:units = "degrees" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
	float lon ;
		lon:long_name = "east longitude" ;
		lon:units = "degrees" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
	float alt ;
		alt:long_name = "altitude" ;
		alt:units = "meters above Mean Sea Level" ;

// global attributes:
		:ingest_software = " cmh_ingest.c,v 1.7 2001/09/10 16:44:16 turney process-ingest-cmh_ingest-7.4-0 $" ;
		:proc_level = "a1" ;
		:input_source = "cmh1:/data/collection/nsa/nsacmhC1.00/vtp052820030000.xls" ;
		:site_id = "nsa" ;
		:facility_id = "C1 : PAARCS2:NSA-Barrow_Central_Facility" ;
		:sample_int = "10 minutes" ;
		:averaging_int = "None." ;
		:serial_number = "218" ;
		:comment = "The time assigned to each data point indicates the end of any\n",
			"period of averaging of the geophysical data." ;
		:resolution_description = "The resolution field attributes refer to the number of significant\n",
			"digits relative to the decimal point that should be used in\n",
			"calculations.  Using fewer digits might result in greater uncertainty;\n",
			"using a larger number of digits should have no effect and thus is\n",
			"unnecessary.  However, analyses based on differences in values with\n",
			"a larger number of significant digits than indicated could lead to\n",
			"erroneous results or misleading scientific conclusions.\n",
			"\n",
			"resolution for lat= 0.001\n",
			"resolution for lon = 0.001\n",
			"resolution for alt = 1" ;
		:zeb_platform = "nsacmhC1.a1" ;
		:history = "created by the Zebra DataStore library, 28-May-2003,2:03:31, $RCSfile: DFA_NetCDF.c,v $ $Revision: 3.54 $\n",
			"" ;
}