netcdf hfeaipfitrh1ogrenM1.s1.20081225.000000 {
dimensions:
	time = UNLIMITED ; // (24 currently)
	param3 = 3 ;
	param2 = 2 ;
variables:
	int base_time ;
		base_time:string = "25-Dec-2008,0:00:00 GMT" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2008-12-25 00:00:00 0:00" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2008-12-25 00:00:00 0:00" ;
	int qc_time(time) ;
		qc_time:long_name = "Quality check results on field: Time offset from midnight" ;
		qc_time:units = "unitless" ;
		qc_time:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
		qc_time:delta_t_lower_limit = 0. ;
		qc_time:delta_t_upper_limit = 3600. ;
		qc_time:prior_sample_flag = 0 ;
		qc_time:comment = "If the \'prior_sample_flag\' is set the first sample time from a new raw file will be compared against the time just previous to it in the stored data. If it is not set the qc_time value for the first sample will be set to 0." ;
	float ratio_85by40_Bs_R_10um_3p(time) ;
		ratio_85by40_Bs_R_10um_3p:long_name = "Computed ratio of Bs_R_10um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_R_10um_3p:units = "unitless" ;
		ratio_85by40_Bs_R_10um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_R_10um_3p(time) ;
		qc_ratio_85by40_Bs_R_10um_3p:long_name = "Quality check results on field: Computed ratio of Bs_R_10um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_R_10um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_R_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_10um_3p(time, param3) ;
		fRH_Bs_R_10um_3p:long_name = "Coefficients for 3 parameter fit of Bs_R_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_R_10um_3p:units = "unitless" ;
		fRH_Bs_R_10um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_R_10um_3p(time) ;
		qc_fRH_Bs_R_10um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_R_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_R_10um_3p:units = "unitless" ;
		qc_fRH_Bs_R_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_10um_3p_r_square(time) ;
		fRH_Bs_R_10um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_R_10um_3p" ;
		fRH_Bs_R_10um_3p_r_square:units = "unitless" ;
		fRH_Bs_R_10um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_R_10um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_R_10um_3p_n(time) ;
		fRH_Bs_R_10um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_R_10um_3p" ;
		fRH_Bs_R_10um_3p_n:units = "unitless" ;
		fRH_Bs_R_10um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_R_10um_2p(time) ;
		ratio_85by40_Bs_R_10um_2p:long_name = "Computed ratio of Bs_R_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_R_10um_2p:units = "unitless" ;
		ratio_85by40_Bs_R_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_R_10um_2p(time) ;
		qc_ratio_85by40_Bs_R_10um_2p:long_name = "Quality check results on field: Computed ratio of Bs_R_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_R_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_R_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_10um_2p(time, param2) ;
		fRH_Bs_R_10um_2p:long_name = "Coefficients for 2 parameter fit of Bs_R_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_R_10um_2p:units = "unitless" ;
		fRH_Bs_R_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_R_10um_2p(time) ;
		qc_fRH_Bs_R_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_R_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_R_10um_2p:units = "unitless" ;
		qc_fRH_Bs_R_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_10um_2p_r_square(time) ;
		fRH_Bs_R_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_R_10um_2p" ;
		fRH_Bs_R_10um_2p_r_square:units = "unitless" ;
		fRH_Bs_R_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_R_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_R_10um_2p_n(time) ;
		fRH_Bs_R_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_R_10um_2p" ;
		fRH_Bs_R_10um_2p_n:units = "unitless" ;
		fRH_Bs_R_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_G_10um_3p(time) ;
		ratio_85by40_Bs_G_10um_3p:long_name = "Computed ratio of Bs_G_10um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_G_10um_3p:units = "unitless" ;
		ratio_85by40_Bs_G_10um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_G_10um_3p(time) ;
		qc_ratio_85by40_Bs_G_10um_3p:long_name = "Quality check results on field: Computed ratio of Bs_G_10um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_G_10um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_G_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_10um_3p(time, param3) ;
		fRH_Bs_G_10um_3p:long_name = "Coefficients for 3 parameter fit of Bs_G_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_G_10um_3p:units = "unitless" ;
		fRH_Bs_G_10um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_G_10um_3p(time) ;
		qc_fRH_Bs_G_10um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_G_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_G_10um_3p:units = "unitless" ;
		qc_fRH_Bs_G_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_10um_3p_r_square(time) ;
		fRH_Bs_G_10um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_G_10um_3p" ;
		fRH_Bs_G_10um_3p_r_square:units = "unitless" ;
		fRH_Bs_G_10um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_G_10um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_G_10um_3p_n(time) ;
		fRH_Bs_G_10um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_G_10um_3p" ;
		fRH_Bs_G_10um_3p_n:units = "unitless" ;
		fRH_Bs_G_10um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_G_10um_2p(time) ;
		ratio_85by40_Bs_G_10um_2p:long_name = "Computed ratio of Bs_G_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_G_10um_2p:units = "unitless" ;
		ratio_85by40_Bs_G_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_G_10um_2p(time) ;
		qc_ratio_85by40_Bs_G_10um_2p:long_name = "Quality check results on field: Computed ratio of Bs_G_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_G_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_G_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_10um_2p(time, param2) ;
		fRH_Bs_G_10um_2p:long_name = "Coefficients for 2 parameter fit of Bs_G_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_G_10um_2p:units = "unitless" ;
		fRH_Bs_G_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_G_10um_2p(time) ;
		qc_fRH_Bs_G_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_G_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_G_10um_2p:units = "unitless" ;
		qc_fRH_Bs_G_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_10um_2p_r_square(time) ;
		fRH_Bs_G_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_G_10um_2p" ;
		fRH_Bs_G_10um_2p_r_square:units = "unitless" ;
		fRH_Bs_G_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_G_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_G_10um_2p_n(time) ;
		fRH_Bs_G_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_G_10um_2p" ;
		fRH_Bs_G_10um_2p_n:units = "unitless" ;
		fRH_Bs_G_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_B_10um_3p(time) ;
		ratio_85by40_Bs_B_10um_3p:long_name = "Computed ratio of Bs_B_10um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_B_10um_3p:units = "unitless" ;
		ratio_85by40_Bs_B_10um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_B_10um_3p(time) ;
		qc_ratio_85by40_Bs_B_10um_3p:long_name = "Quality check results on field: Computed ratio of Bs_B_10um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_B_10um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_B_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_10um_3p(time, param3) ;
		fRH_Bs_B_10um_3p:long_name = "Coefficients for 3 parameter fit of Bs_B_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_B_10um_3p:units = "unitless" ;
		fRH_Bs_B_10um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_B_10um_3p(time) ;
		qc_fRH_Bs_B_10um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_B_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_B_10um_3p:units = "unitless" ;
		qc_fRH_Bs_B_10um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_10um_3p_r_square(time) ;
		fRH_Bs_B_10um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_B_10um_3p" ;
		fRH_Bs_B_10um_3p_r_square:units = "unitless" ;
		fRH_Bs_B_10um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_B_10um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_B_10um_3p_n(time) ;
		fRH_Bs_B_10um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_B_10um_3p" ;
		fRH_Bs_B_10um_3p_n:units = "unitless" ;
		fRH_Bs_B_10um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_B_10um_2p(time) ;
		ratio_85by40_Bs_B_10um_2p:long_name = "Computed ratio of Bs_B_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_B_10um_2p:units = "unitless" ;
		ratio_85by40_Bs_B_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_B_10um_2p(time) ;
		qc_ratio_85by40_Bs_B_10um_2p:long_name = "Quality check results on field: Computed ratio of Bs_B_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_B_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_B_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_10um_2p(time, param2) ;
		fRH_Bs_B_10um_2p:long_name = "Coefficients for 2 parameter fit of Bs_B_10um hygroscopic growth as a function of RH" ;
		fRH_Bs_B_10um_2p:units = "unitless" ;
		fRH_Bs_B_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_B_10um_2p(time) ;
		qc_fRH_Bs_B_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_B_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_B_10um_2p:units = "unitless" ;
		qc_fRH_Bs_B_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_10um_2p_r_square(time) ;
		fRH_Bs_B_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_B_10um_2p" ;
		fRH_Bs_B_10um_2p_r_square:units = "unitless" ;
		fRH_Bs_B_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_B_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_B_10um_2p_n(time) ;
		fRH_Bs_B_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_B_10um_2p" ;
		fRH_Bs_B_10um_2p_n:units = "unitless" ;
		fRH_Bs_B_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_R_1um_3p(time) ;
		ratio_85by40_Bs_R_1um_3p:long_name = "Computed ratio of Bs_R_1um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_R_1um_3p:units = "unitless" ;
		ratio_85by40_Bs_R_1um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_R_1um_3p(time) ;
		qc_ratio_85by40_Bs_R_1um_3p:long_name = "Quality check results on field: Computed ratio of Bs_R_1um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_R_1um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_R_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_1um_3p(time, param3) ;
		fRH_Bs_R_1um_3p:long_name = "Coefficients for 3 parameter fit of Bs_R_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_R_1um_3p:units = "unitless" ;
		fRH_Bs_R_1um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_R_1um_3p(time) ;
		qc_fRH_Bs_R_1um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_R_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_R_1um_3p:units = "unitless" ;
		qc_fRH_Bs_R_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_1um_3p_r_square(time) ;
		fRH_Bs_R_1um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_R_1um_3p" ;
		fRH_Bs_R_1um_3p_r_square:units = "unitless" ;
		fRH_Bs_R_1um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_R_1um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_R_1um_3p_n(time) ;
		fRH_Bs_R_1um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_R_1um_3p" ;
		fRH_Bs_R_1um_3p_n:units = "unitless" ;
		fRH_Bs_R_1um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_R_1um_2p(time) ;
		ratio_85by40_Bs_R_1um_2p:long_name = "Computed ratio of Bs_R_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_R_1um_2p:units = "unitless" ;
		ratio_85by40_Bs_R_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_R_1um_2p(time) ;
		qc_ratio_85by40_Bs_R_1um_2p:long_name = "Quality check results on field: Computed ratio of Bs_R_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_R_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_R_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_1um_2p(time, param2) ;
		fRH_Bs_R_1um_2p:long_name = "Coefficients for 2 parameter fit of Bs_R_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_R_1um_2p:units = "unitless" ;
		fRH_Bs_R_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_R_1um_2p(time) ;
		qc_fRH_Bs_R_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_R_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_R_1um_2p:units = "unitless" ;
		qc_fRH_Bs_R_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_R_1um_2p_r_square(time) ;
		fRH_Bs_R_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_R_1um_2p" ;
		fRH_Bs_R_1um_2p_r_square:units = "unitless" ;
		fRH_Bs_R_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_R_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_R_1um_2p_n(time) ;
		fRH_Bs_R_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_R_1um_2p" ;
		fRH_Bs_R_1um_2p_n:units = "unitless" ;
		fRH_Bs_R_1um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_G_1um_3p(time) ;
		ratio_85by40_Bs_G_1um_3p:long_name = "Computed ratio of Bs_G_1um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_G_1um_3p:units = "unitless" ;
		ratio_85by40_Bs_G_1um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_G_1um_3p(time) ;
		qc_ratio_85by40_Bs_G_1um_3p:long_name = "Quality check results on field: Computed ratio of Bs_G_1um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_G_1um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_G_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_1um_3p(time, param3) ;
		fRH_Bs_G_1um_3p:long_name = "Coefficients for 3 parameter fit of Bs_G_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_G_1um_3p:units = "unitless" ;
		fRH_Bs_G_1um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_G_1um_3p(time) ;
		qc_fRH_Bs_G_1um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_G_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_G_1um_3p:units = "unitless" ;
		qc_fRH_Bs_G_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_1um_3p_r_square(time) ;
		fRH_Bs_G_1um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_G_1um_3p" ;
		fRH_Bs_G_1um_3p_r_square:units = "unitless" ;
		fRH_Bs_G_1um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_G_1um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_G_1um_3p_n(time) ;
		fRH_Bs_G_1um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_G_1um_3p" ;
		fRH_Bs_G_1um_3p_n:units = "unitless" ;
		fRH_Bs_G_1um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_G_1um_2p(time) ;
		ratio_85by40_Bs_G_1um_2p:long_name = "Computed ratio of Bs_G_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_G_1um_2p:units = "unitless" ;
		ratio_85by40_Bs_G_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_G_1um_2p(time) ;
		qc_ratio_85by40_Bs_G_1um_2p:long_name = "Quality check results on field: Computed ratio of Bs_G_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_G_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_G_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_1um_2p(time, param2) ;
		fRH_Bs_G_1um_2p:long_name = "Coefficients for 2 parameter fit of Bs_G_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_G_1um_2p:units = "unitless" ;
		fRH_Bs_G_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_G_1um_2p(time) ;
		qc_fRH_Bs_G_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_G_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_G_1um_2p:units = "unitless" ;
		qc_fRH_Bs_G_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_G_1um_2p_r_square(time) ;
		fRH_Bs_G_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_G_1um_2p" ;
		fRH_Bs_G_1um_2p_r_square:units = "unitless" ;
		fRH_Bs_G_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_G_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_G_1um_2p_n(time) ;
		fRH_Bs_G_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_G_1um_2p" ;
		fRH_Bs_G_1um_2p_n:units = "unitless" ;
		fRH_Bs_G_1um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_B_1um_3p(time) ;
		ratio_85by40_Bs_B_1um_3p:long_name = "Computed ratio of Bs_B_1um at RH 85% and RH 40% for 3 parameter fit" ;
		ratio_85by40_Bs_B_1um_3p:units = "unitless" ;
		ratio_85by40_Bs_B_1um_3p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_B_1um_3p(time) ;
		qc_ratio_85by40_Bs_B_1um_3p:long_name = "Quality check results on field: Computed ratio of Bs_B_1um at RH 85% and RH 40% for 3 parameter fit" ;
		qc_ratio_85by40_Bs_B_1um_3p:units = "unitless" ;
		qc_ratio_85by40_Bs_B_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_1um_3p(time, param3) ;
		fRH_Bs_B_1um_3p:long_name = "Coefficients for 3 parameter fit of Bs_B_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_B_1um_3p:units = "unitless" ;
		fRH_Bs_B_1um_3p:missing_value = -9999.f ;
	int qc_fRH_Bs_B_1um_3p(time) ;
		qc_fRH_Bs_B_1um_3p:long_name = "Quality check results on field: Coefficients for 3 parameter fit of Bs_B_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_B_1um_3p:units = "unitless" ;
		qc_fRH_Bs_B_1um_3p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_1um_3p_r_square(time) ;
		fRH_Bs_B_1um_3p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_B_1um_3p" ;
		fRH_Bs_B_1um_3p_r_square:units = "unitless" ;
		fRH_Bs_B_1um_3p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_B_1um_3p_r_square:missing_value = -9999.f ;
	int fRH_Bs_B_1um_3p_n(time) ;
		fRH_Bs_B_1um_3p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_B_1um_3p" ;
		fRH_Bs_B_1um_3p_n:units = "unitless" ;
		fRH_Bs_B_1um_3p_n:missing_value = -9999 ;
	float ratio_85by40_Bs_B_1um_2p(time) ;
		ratio_85by40_Bs_B_1um_2p:long_name = "Computed ratio of Bs_B_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bs_B_1um_2p:units = "unitless" ;
		ratio_85by40_Bs_B_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bs_B_1um_2p(time) ;
		qc_ratio_85by40_Bs_B_1um_2p:long_name = "Quality check results on field: Computed ratio of Bs_B_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bs_B_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bs_B_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_1um_2p(time, param2) ;
		fRH_Bs_B_1um_2p:long_name = "Coefficients for 2 parameter fit of Bs_B_1um hygroscopic growth as a function of RH" ;
		fRH_Bs_B_1um_2p:units = "unitless" ;
		fRH_Bs_B_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bs_B_1um_2p(time) ;
		qc_fRH_Bs_B_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bs_B_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bs_B_1um_2p:units = "unitless" ;
		qc_fRH_Bs_B_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bs_B_1um_2p_r_square(time) ;
		fRH_Bs_B_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bs_B_1um_2p" ;
		fRH_Bs_B_1um_2p_r_square:units = "unitless" ;
		fRH_Bs_B_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bs_B_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bs_B_1um_2p_n(time) ;
		fRH_Bs_B_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bs_B_1um_2p" ;
		fRH_Bs_B_1um_2p_n:units = "unitless" ;
		fRH_Bs_B_1um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_R_10um_2p(time) ;
		ratio_85by40_Bbs_R_10um_2p:long_name = "Computed ratio of Bbs_R_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_R_10um_2p:units = "unitless" ;
		ratio_85by40_Bbs_R_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_R_10um_2p(time) ;
		qc_ratio_85by40_Bbs_R_10um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_R_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_R_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_R_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_R_10um_2p(time, param2) ;
		fRH_Bbs_R_10um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_R_10um hygroscopic growth as a function of RH" ;
		fRH_Bbs_R_10um_2p:units = "unitless" ;
		fRH_Bbs_R_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_R_10um_2p(time) ;
		qc_fRH_Bbs_R_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_R_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_R_10um_2p:units = "unitless" ;
		qc_fRH_Bbs_R_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_R_10um_2p_r_square(time) ;
		fRH_Bbs_R_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_R_10um_2p" ;
		fRH_Bbs_R_10um_2p_r_square:units = "unitless" ;
		fRH_Bbs_R_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_R_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_R_10um_2p_n(time) ;
		fRH_Bbs_R_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_R_10um_2p" ;
		fRH_Bbs_R_10um_2p_n:units = "unitless" ;
		fRH_Bbs_R_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_G_10um_2p(time) ;
		ratio_85by40_Bbs_G_10um_2p:long_name = "Computed ratio of Bbs_G_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_G_10um_2p:units = "unitless" ;
		ratio_85by40_Bbs_G_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_G_10um_2p(time) ;
		qc_ratio_85by40_Bbs_G_10um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_G_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_G_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_G_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_G_10um_2p(time, param2) ;
		fRH_Bbs_G_10um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_G_10um hygroscopic growth as a function of RH" ;
		fRH_Bbs_G_10um_2p:units = "unitless" ;
		fRH_Bbs_G_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_G_10um_2p(time) ;
		qc_fRH_Bbs_G_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_G_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_G_10um_2p:units = "unitless" ;
		qc_fRH_Bbs_G_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_G_10um_2p_r_square(time) ;
		fRH_Bbs_G_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_G_10um_2p" ;
		fRH_Bbs_G_10um_2p_r_square:units = "unitless" ;
		fRH_Bbs_G_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_G_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_G_10um_2p_n(time) ;
		fRH_Bbs_G_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_G_10um_2p" ;
		fRH_Bbs_G_10um_2p_n:units = "unitless" ;
		fRH_Bbs_G_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_B_10um_2p(time) ;
		ratio_85by40_Bbs_B_10um_2p:long_name = "Computed ratio of Bbs_B_10um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_B_10um_2p:units = "unitless" ;
		ratio_85by40_Bbs_B_10um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_B_10um_2p(time) ;
		qc_ratio_85by40_Bbs_B_10um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_B_10um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_B_10um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_B_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_B_10um_2p(time, param2) ;
		fRH_Bbs_B_10um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_B_10um hygroscopic growth as a function of RH" ;
		fRH_Bbs_B_10um_2p:units = "unitless" ;
		fRH_Bbs_B_10um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_B_10um_2p(time) ;
		qc_fRH_Bbs_B_10um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_B_10um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_B_10um_2p:units = "unitless" ;
		qc_fRH_Bbs_B_10um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_B_10um_2p_r_square(time) ;
		fRH_Bbs_B_10um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_B_10um_2p" ;
		fRH_Bbs_B_10um_2p_r_square:units = "unitless" ;
		fRH_Bbs_B_10um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_B_10um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_B_10um_2p_n(time) ;
		fRH_Bbs_B_10um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_B_10um_2p" ;
		fRH_Bbs_B_10um_2p_n:units = "unitless" ;
		fRH_Bbs_B_10um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_R_1um_2p(time) ;
		ratio_85by40_Bbs_R_1um_2p:long_name = "Computed ratio of Bbs_R_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_R_1um_2p:units = "unitless" ;
		ratio_85by40_Bbs_R_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_R_1um_2p(time) ;
		qc_ratio_85by40_Bbs_R_1um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_R_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_R_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_R_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_R_1um_2p(time, param2) ;
		fRH_Bbs_R_1um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_R_1um hygroscopic growth as a function of RH" ;
		fRH_Bbs_R_1um_2p:units = "unitless" ;
		fRH_Bbs_R_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_R_1um_2p(time) ;
		qc_fRH_Bbs_R_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_R_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_R_1um_2p:units = "unitless" ;
		qc_fRH_Bbs_R_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_R_1um_2p_r_square(time) ;
		fRH_Bbs_R_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_R_1um_2p" ;
		fRH_Bbs_R_1um_2p_r_square:units = "unitless" ;
		fRH_Bbs_R_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_R_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_R_1um_2p_n(time) ;
		fRH_Bbs_R_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_R_1um_2p" ;
		fRH_Bbs_R_1um_2p_n:units = "unitless" ;
		fRH_Bbs_R_1um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_G_1um_2p(time) ;
		ratio_85by40_Bbs_G_1um_2p:long_name = "Computed ratio of Bbs_G_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_G_1um_2p:units = "unitless" ;
		ratio_85by40_Bbs_G_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_G_1um_2p(time) ;
		qc_ratio_85by40_Bbs_G_1um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_G_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_G_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_G_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_G_1um_2p(time, param2) ;
		fRH_Bbs_G_1um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_G_1um hygroscopic growth as a function of RH" ;
		fRH_Bbs_G_1um_2p:units = "unitless" ;
		fRH_Bbs_G_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_G_1um_2p(time) ;
		qc_fRH_Bbs_G_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_G_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_G_1um_2p:units = "unitless" ;
		qc_fRH_Bbs_G_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_G_1um_2p_r_square(time) ;
		fRH_Bbs_G_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_G_1um_2p" ;
		fRH_Bbs_G_1um_2p_r_square:units = "unitless" ;
		fRH_Bbs_G_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_G_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_G_1um_2p_n(time) ;
		fRH_Bbs_G_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_G_1um_2p" ;
		fRH_Bbs_G_1um_2p_n:units = "unitless" ;
		fRH_Bbs_G_1um_2p_n:missing_value = -9999 ;
	float ratio_85by40_Bbs_B_1um_2p(time) ;
		ratio_85by40_Bbs_B_1um_2p:long_name = "Computed ratio of Bbs_B_1um at RH 85% and RH 40% for 2 parameter fit" ;
		ratio_85by40_Bbs_B_1um_2p:units = "unitless" ;
		ratio_85by40_Bbs_B_1um_2p:missing_value = -9999.f ;
	int qc_ratio_85by40_Bbs_B_1um_2p(time) ;
		qc_ratio_85by40_Bbs_B_1um_2p:long_name = "Quality check results on field: Computed ratio of Bbs_B_1um at RH 85% and RH 40% for 2 parameter fit" ;
		qc_ratio_85by40_Bbs_B_1um_2p:units = "unitless" ;
		qc_ratio_85by40_Bbs_B_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_B_1um_2p(time, param2) ;
		fRH_Bbs_B_1um_2p:long_name = "Coefficients for 2 parameter fit of Bbs_B_1um hygroscopic growth as a function of RH" ;
		fRH_Bbs_B_1um_2p:units = "unitless" ;
		fRH_Bbs_B_1um_2p:missing_value = -9999.f ;
	int qc_fRH_Bbs_B_1um_2p(time) ;
		qc_fRH_Bbs_B_1um_2p:long_name = "Quality check results on field: Coefficients for 2 parameter fit of Bbs_B_1um hygroscopic growth as a function of RH" ;
		qc_fRH_Bbs_B_1um_2p:units = "unitless" ;
		qc_fRH_Bbs_B_1um_2p:description = "This field contains qc values which should be interpreted as listed:\n",
			"0 = Good: Data exists and passed all qc tests.\n",
			"1 = Indeterminate: Data may be bad, further analysis recommended.\n",
			"2 = Bad: Data has a bad value.\n",
			"3 = Missing: Data is missing." ;
	float fRH_Bbs_B_1um_2p_r_square(time) ;
		fRH_Bbs_B_1um_2p_r_square:long_name = "R-squared computation for hygroscopicity fit for fRH_Bbs_B_1um_2p" ;
		fRH_Bbs_B_1um_2p_r_square:units = "unitless" ;
		fRH_Bbs_B_1um_2p_r_square:comment = "A good fit will have r-squared close to 1" ;
		fRH_Bbs_B_1um_2p_r_square:missing_value = -9999.f ;
	int fRH_Bbs_B_1um_2p_n(time) ;
		fRH_Bbs_B_1um_2p_n:long_name = "Number of data points in the hygroscopicity fit for fRH_Bbs_B_1um_2p" ;
		fRH_Bbs_B_1um_2p_n:units = "unitless" ;
		fRH_Bbs_B_1um_2p_n:missing_value = -9999 ;
	float Bs_R_Dry_10um_min(time) ;
		Bs_R_Dry_10um_min:long_name = "Minimum value of Bs_R_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_R_Dry_10um_min:units = "1/Mm" ;
		Bs_R_Dry_10um_min:missing_value = -9999.f ;
	float Bs_R_Wet_10um_min(time) ;
		Bs_R_Wet_10um_min:long_name = "Minimum value of Bs_R_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_R_Wet_10um_min:units = "1/Mm" ;
		Bs_R_Wet_10um_min:missing_value = -9999.f ;
	float Bs_G_Dry_10um_min(time) ;
		Bs_G_Dry_10um_min:long_name = "Minimum value of Bs_G_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_G_Dry_10um_min:units = "1/Mm" ;
		Bs_G_Dry_10um_min:missing_value = -9999.f ;
	float Bs_G_Wet_10um_min(time) ;
		Bs_G_Wet_10um_min:long_name = "Minimum value of Bs_G_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_G_Wet_10um_min:units = "1/Mm" ;
		Bs_G_Wet_10um_min:missing_value = -9999.f ;
	float Bs_B_Dry_10um_min(time) ;
		Bs_B_Dry_10um_min:long_name = "Minimum value of Bs_B_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_B_Dry_10um_min:units = "1/Mm" ;
		Bs_B_Dry_10um_min:missing_value = -9999.f ;
	float Bs_B_Wet_10um_min(time) ;
		Bs_B_Wet_10um_min:long_name = "Minimum value of Bs_B_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_B_Wet_10um_min:units = "1/Mm" ;
		Bs_B_Wet_10um_min:missing_value = -9999.f ;
	float Bs_R_Dry_1um_min(time) ;
		Bs_R_Dry_1um_min:long_name = "Minimum value of Bs_R_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_R_Dry_1um_min:units = "1/Mm" ;
		Bs_R_Dry_1um_min:missing_value = -9999.f ;
	float Bs_R_Wet_1um_min(time) ;
		Bs_R_Wet_1um_min:long_name = "Minimum value of Bs_R_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_R_Wet_1um_min:units = "1/Mm" ;
		Bs_R_Wet_1um_min:missing_value = -9999.f ;
	float Bs_G_Dry_1um_min(time) ;
		Bs_G_Dry_1um_min:long_name = "Minimum value of Bs_G_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_G_Dry_1um_min:units = "1/Mm" ;
		Bs_G_Dry_1um_min:missing_value = -9999.f ;
	float Bs_G_Wet_1um_min(time) ;
		Bs_G_Wet_1um_min:long_name = "Minimum value of Bs_G_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_G_Wet_1um_min:units = "1/Mm" ;
		Bs_G_Wet_1um_min:missing_value = -9999.f ;
	float Bs_B_Dry_1um_min(time) ;
		Bs_B_Dry_1um_min:long_name = "Minimum value of Bs_B_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_B_Dry_1um_min:units = "1/Mm" ;
		Bs_B_Dry_1um_min:missing_value = -9999.f ;
	float Bs_B_Wet_1um_min(time) ;
		Bs_B_Wet_1um_min:long_name = "Minimum value of Bs_B_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_B_Wet_1um_min:units = "1/Mm" ;
		Bs_B_Wet_1um_min:missing_value = -9999.f ;
	float Bbs_R_Dry_10um_min(time) ;
		Bbs_R_Dry_10um_min:long_name = "Minimum value of Bbs_R_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_R_Dry_10um_min:units = "1/Mm" ;
		Bbs_R_Dry_10um_min:missing_value = -9999.f ;
	float Bbs_R_Wet_10um_min(time) ;
		Bbs_R_Wet_10um_min:long_name = "Minimum value of Bbs_R_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_R_Wet_10um_min:units = "1/Mm" ;
		Bbs_R_Wet_10um_min:missing_value = -9999.f ;
	float Bbs_G_Dry_10um_min(time) ;
		Bbs_G_Dry_10um_min:long_name = "Minimum value of Bbs_G_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_G_Dry_10um_min:units = "1/Mm" ;
		Bbs_G_Dry_10um_min:missing_value = -9999.f ;
	float Bbs_G_Wet_10um_min(time) ;
		Bbs_G_Wet_10um_min:long_name = "Minimum value of Bbs_G_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_G_Wet_10um_min:units = "1/Mm" ;
		Bbs_G_Wet_10um_min:missing_value = -9999.f ;
	float Bbs_B_Dry_10um_min(time) ;
		Bbs_B_Dry_10um_min:long_name = "Minimum value of Bbs_B_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_B_Dry_10um_min:units = "1/Mm" ;
		Bbs_B_Dry_10um_min:missing_value = -9999.f ;
	float Bbs_B_Wet_10um_min(time) ;
		Bbs_B_Wet_10um_min:long_name = "Minimum value of Bbs_B_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_B_Wet_10um_min:units = "1/Mm" ;
		Bbs_B_Wet_10um_min:missing_value = -9999.f ;
	float Bbs_R_Dry_1um_min(time) ;
		Bbs_R_Dry_1um_min:long_name = "Minimum value of Bbs_R_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_R_Dry_1um_min:units = "1/Mm" ;
		Bbs_R_Dry_1um_min:missing_value = -9999.f ;
	float Bbs_R_Wet_1um_min(time) ;
		Bbs_R_Wet_1um_min:long_name = "Minimum value of Bbs_R_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_R_Wet_1um_min:units = "1/Mm" ;
		Bbs_R_Wet_1um_min:missing_value = -9999.f ;
	float Bbs_G_Dry_1um_min(time) ;
		Bbs_G_Dry_1um_min:long_name = "Minimum value of Bbs_G_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_G_Dry_1um_min:units = "1/Mm" ;
		Bbs_G_Dry_1um_min:missing_value = -9999.f ;
	float Bbs_G_Wet_1um_min(time) ;
		Bbs_G_Wet_1um_min:long_name = "Minimum value of Bbs_G_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_G_Wet_1um_min:units = "1/Mm" ;
		Bbs_G_Wet_1um_min:missing_value = -9999.f ;
	float Bbs_B_Dry_1um_min(time) ;
		Bbs_B_Dry_1um_min:long_name = "Minimum value of Bbs_B_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_B_Dry_1um_min:units = "1/Mm" ;
		Bbs_B_Dry_1um_min:missing_value = -9999.f ;
	float Bbs_B_Wet_1um_min(time) ;
		Bbs_B_Wet_1um_min:long_name = "Minimum value of Bbs_B_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_B_Wet_1um_min:units = "1/Mm" ;
		Bbs_B_Wet_1um_min:missing_value = -9999.f ;
	float Bs_R_Dry_10um_max(time) ;
		Bs_R_Dry_10um_max:long_name = "Maximum value of Bs_R_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_R_Dry_10um_max:units = "1/Mm" ;
		Bs_R_Dry_10um_max:missing_value = -9999.f ;
	float Bs_R_Wet_10um_max(time) ;
		Bs_R_Wet_10um_max:long_name = "Maximum value of Bs_R_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_R_Wet_10um_max:units = "1/Mm" ;
		Bs_R_Wet_10um_max:missing_value = -9999.f ;
	float Bs_G_Dry_10um_max(time) ;
		Bs_G_Dry_10um_max:long_name = "Maximum value of Bs_G_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_G_Dry_10um_max:units = "1/Mm" ;
		Bs_G_Dry_10um_max:missing_value = -9999.f ;
	float Bs_G_Wet_10um_max(time) ;
		Bs_G_Wet_10um_max:long_name = "Maximum value of Bs_G_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_G_Wet_10um_max:units = "1/Mm" ;
		Bs_G_Wet_10um_max:missing_value = -9999.f ;
	float Bs_B_Dry_10um_max(time) ;
		Bs_B_Dry_10um_max:long_name = "Maximum value of Bs_B_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bs_B_Dry_10um_max:units = "1/Mm" ;
		Bs_B_Dry_10um_max:missing_value = -9999.f ;
	float Bs_B_Wet_10um_max(time) ;
		Bs_B_Wet_10um_max:long_name = "Maximum value of Bs_B_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bs_B_Wet_10um_max:units = "1/Mm" ;
		Bs_B_Wet_10um_max:missing_value = -9999.f ;
	float Bs_R_Dry_1um_max(time) ;
		Bs_R_Dry_1um_max:long_name = "Maximum value of Bs_R_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_R_Dry_1um_max:units = "1/Mm" ;
		Bs_R_Dry_1um_max:missing_value = -9999.f ;
	float Bs_R_Wet_1um_max(time) ;
		Bs_R_Wet_1um_max:long_name = "Maximum value of Bs_R_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_R_Wet_1um_max:units = "1/Mm" ;
		Bs_R_Wet_1um_max:missing_value = -9999.f ;
	float Bs_G_Dry_1um_max(time) ;
		Bs_G_Dry_1um_max:long_name = "Maximum value of Bs_G_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_G_Dry_1um_max:units = "1/Mm" ;
		Bs_G_Dry_1um_max:missing_value = -9999.f ;
	float Bs_G_Wet_1um_max(time) ;
		Bs_G_Wet_1um_max:long_name = "Maximum value of Bs_G_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_G_Wet_1um_max:units = "1/Mm" ;
		Bs_G_Wet_1um_max:missing_value = -9999.f ;
	float Bs_B_Dry_1um_max(time) ;
		Bs_B_Dry_1um_max:long_name = "Maximum value of Bs_B_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bs_B_Dry_1um_max:units = "1/Mm" ;
		Bs_B_Dry_1um_max:missing_value = -9999.f ;
	float Bs_B_Wet_1um_max(time) ;
		Bs_B_Wet_1um_max:long_name = "Maximum value of Bs_B_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bs_B_Wet_1um_max:units = "1/Mm" ;
		Bs_B_Wet_1um_max:missing_value = -9999.f ;
	float Bbs_R_Dry_10um_max(time) ;
		Bbs_R_Dry_10um_max:long_name = "Maximum value of Bbs_R_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_R_Dry_10um_max:units = "1/Mm" ;
		Bbs_R_Dry_10um_max:missing_value = -9999.f ;
	float Bbs_R_Wet_10um_max(time) ;
		Bbs_R_Wet_10um_max:long_name = "Maximum value of Bbs_R_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_R_Wet_10um_max:units = "1/Mm" ;
		Bbs_R_Wet_10um_max:missing_value = -9999.f ;
	float Bbs_G_Dry_10um_max(time) ;
		Bbs_G_Dry_10um_max:long_name = "Maximum value of Bbs_G_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_G_Dry_10um_max:units = "1/Mm" ;
		Bbs_G_Dry_10um_max:missing_value = -9999.f ;
	float Bbs_G_Wet_10um_max(time) ;
		Bbs_G_Wet_10um_max:long_name = "Maximum value of Bbs_G_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_G_Wet_10um_max:units = "1/Mm" ;
		Bbs_G_Wet_10um_max:missing_value = -9999.f ;
	float Bbs_B_Dry_10um_max(time) ;
		Bbs_B_Dry_10um_max:long_name = "Maximum value of Bbs_B_Dry_10um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_B_Dry_10um_max:units = "1/Mm" ;
		Bbs_B_Dry_10um_max:missing_value = -9999.f ;
	float Bbs_B_Wet_10um_max(time) ;
		Bbs_B_Wet_10um_max:long_name = "Maximum value of Bbs_B_Wet_10um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_B_Wet_10um_max:units = "1/Mm" ;
		Bbs_B_Wet_10um_max:missing_value = -9999.f ;
	float Bbs_R_Dry_1um_max(time) ;
		Bbs_R_Dry_1um_max:long_name = "Maximum value of Bbs_R_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_R_Dry_1um_max:units = "1/Mm" ;
		Bbs_R_Dry_1um_max:missing_value = -9999.f ;
	float Bbs_R_Wet_1um_max(time) ;
		Bbs_R_Wet_1um_max:long_name = "Maximum value of Bbs_R_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_R_Wet_1um_max:units = "1/Mm" ;
		Bbs_R_Wet_1um_max:missing_value = -9999.f ;
	float Bbs_G_Dry_1um_max(time) ;
		Bbs_G_Dry_1um_max:long_name = "Maximum value of Bbs_G_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_G_Dry_1um_max:units = "1/Mm" ;
		Bbs_G_Dry_1um_max:missing_value = -9999.f ;
	float Bbs_G_Wet_1um_max(time) ;
		Bbs_G_Wet_1um_max:long_name = "Maximum value of Bbs_G_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_G_Wet_1um_max:units = "1/Mm" ;
		Bbs_G_Wet_1um_max:missing_value = -9999.f ;
	float Bbs_B_Dry_1um_max(time) ;
		Bbs_B_Dry_1um_max:long_name = "Maximum value of Bbs_B_Dry_1um_Neph3W_1 in data selected for fRH fit" ;
		Bbs_B_Dry_1um_max:units = "1/Mm" ;
		Bbs_B_Dry_1um_max:missing_value = -9999.f ;
	float Bbs_B_Wet_1um_max(time) ;
		Bbs_B_Wet_1um_max:long_name = "Maximum value of Bbs_B_Wet_1um_Neph3W_2 in data selected for fRH fit" ;
		Bbs_B_Wet_1um_max:units = "1/Mm" ;
		Bbs_B_Wet_1um_max:missing_value = -9999.f ;
	float RH_NephVol_Dry_min(time) ;
		RH_NephVol_Dry_min:long_name = "Minimum value of RH_NephVol_Dry in data selected for fit" ;
		RH_NephVol_Dry_min:units = "%" ;
		RH_NephVol_Dry_min:missing_value = -9999.f ;
	float RH_NephVol_Dry_max(time) ;
		RH_NephVol_Dry_max:long_name = "Maximum value of RH_NephVol_Dry in data selected for fit" ;
		RH_NephVol_Dry_max:units = "%" ;
		RH_NephVol_Dry_max:missing_value = -9999.f ;
	float RH_NephVol_Wet_min(time) ;
		RH_NephVol_Wet_min:long_name = "Minimum value of RH_NephVol_Wet in data selected for fit" ;
		RH_NephVol_Wet_min:units = "%" ;
		RH_NephVol_Wet_min:missing_value = -9999.f ;
	float RH_NephVol_Wet_max(time) ;
		RH_NephVol_Wet_max:long_name = "Maximum value of RH_NephVol_Wet in data selected for fit" ;
		RH_NephVol_Wet_max:units = "%" ;
		RH_NephVol_Wet_max:missing_value = -9999.f ;
	float lat ;
		lat:long_name = "North latitude" ;
		lat:units = "degree_N" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
	float lon ;
		lon:long_name = "East longitude" ;
		lon:units = "degree_E" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
	float alt ;
		alt:long_name = "Altitude above mean sea level" ;
		alt:units = "m" ;

// global attributes:
		:process_version = "$State: vap-aipfrh-1.3-0.sol5_10 $" ;
		:command_line = "aipfrh -d 20081225 -f hfe.M1" ;
		:site_id = "hfe" ;
		:facility_id = "M1: Shouxian, China" ;
		:title = "AOS f(RH) from aip1ogren 1 minute data" ;
		:comment = "Curve fitting parameters for scattering vs RH in the red, green and blue channel" ;
		:comment2 = "The two parameter fit is more commonly used, however the 3 parameter fit appears to work better with deliquescent-type aerosols." ;
		:dod_version = "2.0" ;
		:equation_2_param_fit = "bsp(RH%)/Bsp(~40%) = a*[1-(RH%/100)]^(-b)" ;
		:equation_3_param_fit = "bsp(RH%)/Bsp(~40%) = a*[1+b(RH%/100)^c]" ;
		:curve_fit_iter_max = "500 (maximum number of iterations per fit)" ;
		:curve_fit_points = "20 (minimum number of input values per fit)" ;
		:curve_fit_tolerance = ".001 (convergence tolerance for the fit)" ;
		:input_datastreams_description = "A string consisting of the datastream(s), datastream version(s), and datastream date (range)." ;
		:input_datastreams_num = 1 ;
		:input_datastreams = "hfeaip1ogrenM1.c1 : 1.000000 : 20081225.000000 ;" ;
		:zeb_platform = "hfeaipfitrh1ogrenM1.c1" ;
		:history = "created by user dsmgr on machine emerald at 1-May-2012,22:13:26, using $State: zebra-zeblib-4.23-0.el5 $" ;
}