netcdf guc915rwpwindmeanlowM1.a1.20220825.160000 { dimensions: time = UNLIMITED ; // (7 currently) height = 95 ; bound = 2 ; variables: int base_time ; base_time:string = "2022-08-25 00:00:00 0:00" ; base_time:long_name = "Base time in Epoch" ; base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ; base_time:ancillary_variables = "time_offset" ; double time_offset(time) ; time_offset:long_name = "Time offset from base_time" ; time_offset:units = "seconds since 2022-08-25 00:00:00 0:00" ; time_offset:ancillary_variables = "base_time" ; double time(time) ; time:long_name = "Time offset from midnight" ; time:units = "seconds since 2022-08-25 00:00:00 0:00" ; time:bounds = "time_bounds" ; time:calendar = "gregorian" ; time:standard_name = "time" ; double time_bounds(time, bound) ; time_bounds:long_name = "Time cell bounds" ; float height(height) ; height:long_name = "Height above ground level" ; height:units = "m" ; height:bounds = "height_bounds" ; height:standard_name = "height" ; float height_bounds(height, bound) ; height_bounds:long_name = "height cell bounds" ; float beam_tilt_angle(time) ; beam_tilt_angle:long_name = "Beam tilt angle from the vertical" ; beam_tilt_angle:units = "degree" ; beam_tilt_angle:missing_value = -9999.f ; float beam_azimuth_angle(time) ; beam_azimuth_angle:long_name = "Beam azimuth angle from true north" ; beam_azimuth_angle:units = "degree" ; beam_azimuth_angle:missing_value = -9999.f ; float wind_direction(time, height) ; wind_direction:long_name = "Wind direction" ; wind_direction:units = "degree" ; wind_direction:missing_value = -9999.f ; wind_direction:standard_name = "wind_from_direction" ; float wind_speed(time, height) ; wind_speed:long_name = "Wind speed" ; wind_speed:units = "m/s" ; wind_speed:missing_value = -9999.f ; wind_speed:ancillary_variables = "wind_speed_quality_flag" ; wind_speed:standard_name = "wind_speed" ; int wind_speed_quality_flag(time, height) ; wind_speed_quality_flag:long_name = "Wind speed quality flag" ; wind_speed_quality_flag:units = "unitless" ; wind_speed_quality_flag:missing_value = -9999 ; wind_speed_quality_flag:flag_masks = 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 ; wind_speed_quality_flag:flag_meanings = "no_data bad_moments birds_width birds_velocity birds_power precipitation time_missing time_consensus vertical_missing vertical_extrapolated beam_missing beam_consensus height_missing height_consensus mode_missing mode_consensus" ; wind_speed_quality_flag:bit_1_description = "No measurement data available" ; wind_speed_quality_flag:bit_2_description = "Insufficient number of moments pass the moment quality checks" ; wind_speed_quality_flag:bit_3_description = "Spectral width associated with migrating birds affecting signal" ; wind_speed_quality_flag:bit_4_description = "Expected velocity of migrating birds affecting Doppler signal" ; wind_speed_quality_flag:bit_5_description = "Expected signal power associated with migrating birds affecting signal" ; wind_speed_quality_flag:bit_6_description = "Precipitation likely affecting signal" ; wind_speed_quality_flag:bit_7_description = "Time consensus filter fails because not enough valid moments are available to compute a consensus" ; wind_speed_quality_flag:bit_8_description = "Time consensus filter fails because not enough moments pass the time consensus requirements" ; wind_speed_quality_flag:bit_9_description = "No vertical wind data is available, therefore, no vertical wind correction could be applied" ; wind_speed_quality_flag:bit_10_description = "Data for vertical wind correction is not available for this height level but is extrapolated from other height levels, instead. This flag is only set if quality rules forbid to use vertically extrapolated results for vertical wind correction" ; wind_speed_quality_flag:bit_11_description = "Beam consensus filter fails because for some beam there is no data available" ; wind_speed_quality_flag:bit_12_description = "Beam consensus filter fails because the beams do not fulfill the consensus requirements" ; wind_speed_quality_flag:bit_13_description = "Height consensus filter fails because for some height level there is no data available" ; wind_speed_quality_flag:bit_14_description = "Height consensus filter fails because not all heights fulfill the consensus requirements" ; wind_speed_quality_flag:bit_15_description = "Mode consensus filter fails because for some mode there is no data available" ; wind_speed_quality_flag:bit_16_description = "Mode consensus filter fails because the modes do not fulfill the consensus requirements" ; float wind_speed_x(time, height) ; wind_speed_x:long_name = "Wind speed radial component X" ; wind_speed_x:units = "m/s" ; wind_speed_x:missing_value = -9999.f ; wind_speed_x:ancillary_variables = "wind_speed_x_quality_flag" ; float wind_speed_x_std(time, height) ; wind_speed_x_std:long_name = "Wind speed radial component X standard deviation" ; wind_speed_x_std:units = "m/s" ; wind_speed_x_std:missing_value = -9999.f ; int wind_speed_x_count(time, height) ; wind_speed_x_count:long_name = "Wind speed radial component X count" ; wind_speed_x_count:units = "unitless" ; wind_speed_x_count:missing_value = -9999 ; int wind_speed_x_quality_flag(time, height) ; wind_speed_x_quality_flag:long_name = "Wind speed radial component X quality flag" ; wind_speed_x_quality_flag:units = "unitless" ; wind_speed_x_quality_flag:missing_value = -9999 ; wind_speed_x_quality_flag:flag_masks = 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 ; wind_speed_x_quality_flag:flag_meanings = "no_data bad_moments birds_width birds_velocity birds_power precipitation time_missing time_consensus vertical_missing vertical_extrapolated beam_missing beam_consensus height_missing height_consensus mode_missing mode_consensus" ; wind_speed_x_quality_flag:bit_1_description = "No measurement data available" ; wind_speed_x_quality_flag:bit_2_description = "Insufficient number of moments pass the moment quality checks" ; wind_speed_x_quality_flag:bit_3_description = "Spectral width associated with migrating birds affecting signal" ; wind_speed_x_quality_flag:bit_4_description = "Expected velocity of migrating birds affecting Doppler signal" ; wind_speed_x_quality_flag:bit_5_description = "Expected signal power associated with migrating birds affecting signal" ; wind_speed_x_quality_flag:bit_6_description = "Precipitation likely affecting signal" ; wind_speed_x_quality_flag:bit_7_description = "Time consensus filter fails because not enough valid moments are available to compute a consensus" ; wind_speed_x_quality_flag:bit_8_description = "Time consensus filter fails because not enough moments pass the time consensus requirements" ; wind_speed_x_quality_flag:bit_9_description = "No vertical wind data is available, therefore, no vertical wind correction could be applied" ; wind_speed_x_quality_flag:bit_10_description = "Data for vertical wind correction is not available for this height level but is extrapolated from other height levels, instead. This flag is only set if quality rules forbid to use vertically extrapolated results for vertical wind correction" ; wind_speed_x_quality_flag:bit_11_description = "Beam consensus filter fails because for some beam there is no data available" ; wind_speed_x_quality_flag:bit_12_description = "Beam consensus filter fails because the beams do not fulfill the consensus requirements" ; wind_speed_x_quality_flag:bit_13_description = "Height consensus filter fails because for some height level there is no data available" ; wind_speed_x_quality_flag:bit_14_description = "Height consensus filter fails because not all heights fulfill the consensus requirements" ; wind_speed_x_quality_flag:bit_15_description = "Mode consensus filter fails because for some mode there is no data available" ; wind_speed_x_quality_flag:bit_16_description = "Mode consensus filter fails because the modes do not fulfill the consensus requirements" ; float wind_speed_y(time, height) ; wind_speed_y:long_name = "Wind speed radial component Y" ; wind_speed_y:units = "m/s" ; wind_speed_y:missing_value = -9999.f ; wind_speed_y:ancillary_variables = "wind_speed_y_quality_flag" ; float wind_speed_y_std(time, height) ; wind_speed_y_std:long_name = "Wind speed radial component Y standard deviation" ; wind_speed_y_std:units = "m/s" ; wind_speed_y_std:missing_value = -9999.f ; int wind_speed_y_count(time, height) ; wind_speed_y_count:long_name = "Wind speed radial component Y count" ; wind_speed_y_count:units = "unitless" ; wind_speed_y_count:missing_value = -9999 ; int wind_speed_y_quality_flag(time, height) ; wind_speed_y_quality_flag:long_name = "Wind speed radial component Y quality flag" ; wind_speed_y_quality_flag:units = "unitless" ; wind_speed_y_quality_flag:missing_value = -9999 ; wind_speed_y_quality_flag:flag_masks = 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 ; wind_speed_y_quality_flag:flag_meanings = "no_data bad_moments birds_width birds_velocity birds_power precipitation time_missing time_consensus vertical_missing vertical_extrapolated beam_missing beam_consensus height_missing height_consensus mode_missing mode_consensus" ; wind_speed_y_quality_flag:bit_1_description = "No measurement data available" ; wind_speed_y_quality_flag:bit_2_description = "Insufficient number of moments pass the moment quality checks" ; wind_speed_y_quality_flag:bit_3_description = "Spectral width associated with migrating birds affecting signal" ; wind_speed_y_quality_flag:bit_4_description = "Expected velocity of migrating birds affecting Doppler signal" ; wind_speed_y_quality_flag:bit_5_description = "Expected signal power associated with migrating birds affecting signal" ; wind_speed_y_quality_flag:bit_6_description = "Precipitation likely affecting signal" ; wind_speed_y_quality_flag:bit_7_description = "Time consensus filter fails because not enough valid moments are available to compute a consensus" ; wind_speed_y_quality_flag:bit_8_description = "Time consensus filter fails because not enough moments pass the time consensus requirements" ; wind_speed_y_quality_flag:bit_9_description = "No vertical wind data is available, therefore, no vertical wind correction could be applied" ; wind_speed_y_quality_flag:bit_10_description = "Data for vertical wind correction is not available for this height level but is extrapolated from other height levels, instead. This flag is only set if quality rules forbid to use vertically extrapolated results for vertical wind correction" ; wind_speed_y_quality_flag:bit_11_description = "Beam consensus filter fails because for some beam there is no data available" ; wind_speed_y_quality_flag:bit_12_description = "Beam consensus filter fails because the beams do not fulfill the consensus requirements" ; wind_speed_y_quality_flag:bit_13_description = "Height consensus filter fails because for some height level there is no data available" ; wind_speed_y_quality_flag:bit_14_description = "Height consensus filter fails because not all heights fulfill the consensus requirements" ; wind_speed_y_quality_flag:bit_15_description = "Mode consensus filter fails because for some mode there is no data available" ; wind_speed_y_quality_flag:bit_16_description = "Mode consensus filter fails because the modes do not fulfill the consensus requirements" ; float wind_speed_w(time, height) ; wind_speed_w:long_name = "Wind speed radial component W" ; wind_speed_w:units = "m/s" ; wind_speed_w:missing_value = -9999.f ; wind_speed_w:ancillary_variables = "wind_speed_w_quality_flag" ; float wind_speed_w_std(time, height) ; wind_speed_w_std:long_name = "Wind speed radial component W standard deviation" ; wind_speed_w_std:units = "m/s" ; wind_speed_w_std:missing_value = -9999.f ; int wind_speed_w_count(time, height) ; wind_speed_w_count:long_name = "Wind speed radial component W count" ; wind_speed_w_count:units = "unitless" ; wind_speed_w_count:missing_value = -9999 ; int wind_speed_w_quality_flag(time, height) ; wind_speed_w_quality_flag:long_name = "Wind speed radial component W quality flag" ; wind_speed_w_quality_flag:units = "unitless" ; wind_speed_w_quality_flag:missing_value = -9999 ; wind_speed_w_quality_flag:flag_masks = 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768 ; wind_speed_w_quality_flag:flag_meanings = "no_data bad_moments birds_width birds_velocity birds_power precipitation time_missing time_consensus vertical_missing vertical_extrapolated beam_missing beam_consensus height_missing height_consensus mode_missing mode_consensus" ; wind_speed_w_quality_flag:bit_1_description = "No measurement data available" ; wind_speed_w_quality_flag:bit_2_description = "Insufficient number of moments pass the moment quality checks" ; wind_speed_w_quality_flag:bit_3_description = "Spectral width associated with migrating birds affecting signal" ; wind_speed_w_quality_flag:bit_4_description = "Expected velocity of migrating birds affecting Doppler signal" ; wind_speed_w_quality_flag:bit_5_description = "Expected signal power associated with migrating birds affecting signal" ; wind_speed_w_quality_flag:bit_6_description = "Precipitation likely affecting signal" ; wind_speed_w_quality_flag:bit_7_description = "Time consensus filter fails because not enough valid moments are available to compute a consensus" ; wind_speed_w_quality_flag:bit_8_description = "Time consensus filter fails because not enough moments pass the time consensus requirements" ; wind_speed_w_quality_flag:bit_9_description = "No vertical wind data is available, therefore, no vertical wind correction could be applied" ; wind_speed_w_quality_flag:bit_10_description = "Data for vertical wind correction is not available for this height level but is extrapolated from other height levels, instead. This flag is only set if quality rules forbid to use vertically extrapolated results for vertical wind correction" ; wind_speed_w_quality_flag:bit_11_description = "Beam consensus filter fails because for some beam there is no data available" ; wind_speed_w_quality_flag:bit_12_description = "Beam consensus filter fails because the beams do not fulfill the consensus requirements" ; wind_speed_w_quality_flag:bit_13_description = "Height consensus filter fails because for some height level there is no data available" ; wind_speed_w_quality_flag:bit_14_description = "Height consensus filter fails because not all heights fulfill the consensus requirements" ; wind_speed_w_quality_flag:bit_15_description = "Mode consensus filter fails because for some mode there is no data available" ; wind_speed_w_quality_flag:bit_16_description = "Mode consensus filter fails because the modes do not fulfill the consensus requirements" ; float backscatter(time, height) ; backscatter:long_name = "Backscatter" ; backscatter:units = "unitless" ; backscatter:missing_value = -9999.f ; float lat ; lat:long_name = "North latitude" ; lat:units = "degree_N" ; lat:valid_min = -90.f ; lat:valid_max = 90.f ; lat:standard_name = "latitude" ; float lon ; lon:long_name = "East longitude" ; lon:units = "degree_E" ; lon:valid_min = -180.f ; lon:valid_max = 180.f ; lon:standard_name = "longitude" ; float alt ; alt:long_name = "Altitude above mean sea level" ; alt:units = "m" ; alt:standard_name = "altitude" ; // global attributes: :command_line = "rwp_ingest -n 915rwp -s guc -f M1" ; :Conventions = "ARM-1.1" ; :process_version = "ingest-rwp-11.7-0.el7" ; :dod_version = "915rwpwindmeanlow-a1-1.1" ; :input_source = "/data/collection/guc/guc915rwpM1.00/2022-08-25T15-MainData1.mnd" ; :site_id = "guc" ; :platform_id = "915rwpwindmeanlow" ; :facility_id = "M1" ; :data_level = "a1" ; :location_description = "Surface Atmosphere Integrated Field Laboratory (SAIL), Mt Crested Butte, Colorado" ; :datastream = "guc915rwpwindmeanlowM1.a1" ; :frequency = "915 MHz" ; :serial_number = "A-B-0455" ; :software_version = "SRun 1.53" ; :history = "created by user dsmgr on machine prod-proc2.adc.arm.gov at 2022-08-25 16:36:22, using ingest-rwp-11.7-0.el7" ; }