netcdf enainterpolatedsondeC1.c1.20240424.000030 {
dimensions:
	time = UNLIMITED ; // (1440 currently)
	height = 332 ;
variables:
	int base_time ;
		base_time:string = "2024-04-24 00:00:00 0:00" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
		base_time:ancillary_variables = "time_offset" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2024-04-24 00:00:00 0:00" ;
		time_offset:ancillary_variables = "base_time" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2024-04-24 00:00:00 0:00" ;
		time:calendar = "gregorian" ;
		time:standard_name = "time" ;
	float height(height) ;
		height:long_name = "Height" ;
		height:units = "km" ;
		height:comment = "Height represents distance above mean sea level" ;
		height:standard_name = "altitude" ;
	float precip(time) ;
		precip:long_name = "Precipitation" ;
		precip:units = "mm" ;
		precip:missing_value = -9999.f ;
		precip:ancillary_variables = "qc_precip" ;
		precip:standard_name = "lwe_thickness_of_precipitation_amount" ;
	int qc_precip(time) ;
		qc_precip:long_name = "Quality check results on variable: Precipitation" ;
		qc_precip:units = "1" ;
		qc_precip:standard_name = "quality_flag" ;
		qc_precip:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_precip:flag_method = "bit" ;
		qc_precip:bit_1_description = "Not used" ;
		qc_precip:bit_1_assessment = "Bad" ;
		qc_precip:bit_2_description = "Not used" ;
		qc_precip:bit_2_assessment = "Bad" ;
		qc_precip:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_precip:bit_3_assessment = "Bad" ;
	float temp(time, height) ;
		temp:long_name = "Temperature" ;
		temp:units = "degC" ;
		temp:standard_name = "air_temperature" ;
		temp:valid_min = -90.f ;
		temp:valid_max = 50.f ;
		temp:missing_value = -9999.f ;
		temp:ancillary_variables = "qc_temp source_temp" ;
	int qc_temp(time, height) ;
		qc_temp:long_name = "Quality check results on variable: Temperature" ;
		qc_temp:units = "1" ;
		qc_temp:standard_name = "quality_flag" ;
		qc_temp:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_temp:flag_method = "bit" ;
		qc_temp:bit_1_description = "Value is less than the valid_min." ;
		qc_temp:bit_1_assessment = "Indeterminate" ;
		qc_temp:bit_2_description = "Value is greater than the valid_max." ;
		qc_temp:bit_2_assessment = "Indeterminate" ;
		qc_temp:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_temp:bit_3_assessment = "Bad" ;
	int source_temp(time, height) ;
		source_temp:long_name = "Source for variable:Temperature" ;
		source_temp:units = "1" ;
		source_temp:description = "This field contains integer values which should be interpreted as listed." ;
		source_temp:flag_method = "integer" ;
		source_temp:flag_0_description = "griddedsonde.c0:temp" ;
		source_temp:flag_1_description = "interpolated" ;
		source_temp:missing_value = -9999 ;
	float rh(time, height) ;
		rh:long_name = "Relative humidity" ;
		rh:units = "%" ;
		rh:standard_name = "relative_humidity" ;
		rh:valid_min = 0.f ;
		rh:valid_max = 105.f ;
		rh:missing_value = -9999.f ;
		rh:ancillary_variables = "qc_rh source_rh" ;
	int qc_rh(time, height) ;
		qc_rh:long_name = "Quality check results on variable: Relative humidity" ;
		qc_rh:units = "1" ;
		qc_rh:standard_name = "quality_flag" ;
		qc_rh:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_rh:flag_method = "bit" ;
		qc_rh:bit_1_description = "Value is less than the valid_min." ;
		qc_rh:bit_1_assessment = "Indeterminate" ;
		qc_rh:bit_2_description = "Value is greater than the valid_max." ;
		qc_rh:bit_2_assessment = "Indeterminate" ;
		qc_rh:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_rh:bit_3_assessment = "Bad" ;
	int source_rh(time, height) ;
		source_rh:long_name = "Source for variable:Relative humidity" ;
		source_rh:units = "1" ;
		source_rh:description = "This field contains integer values which should be interpreted as listed." ;
		source_rh:flag_method = "integer" ;
		source_rh:flag_0_description = "griddedsonde.c0:rh" ;
		source_rh:flag_1_description = "interpolated" ;
		source_rh:missing_value = -9999 ;
	float vap_pres(time, height) ;
		vap_pres:long_name = "Vapor pressure" ;
		vap_pres:units = "kPa" ;
		vap_pres:standard_name = "water_vapor_partial_pressure_in_air" ;
		vap_pres:missing_value = -9999.f ;
		vap_pres:ancillary_variables = "qc_vap_pres" ;
	int qc_vap_pres(time, height) ;
		qc_vap_pres:long_name = "Quality check results on variable: Vapor pressure" ;
		qc_vap_pres:units = "1" ;
		qc_vap_pres:standard_name = "quality_flag" ;
		qc_vap_pres:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_vap_pres:flag_method = "bit" ;
		qc_vap_pres:bit_1_description = "Not used" ;
		qc_vap_pres:bit_1_assessment = "Bad" ;
		qc_vap_pres:bit_2_description = "Not used" ;
		qc_vap_pres:bit_2_assessment = "Bad" ;
		qc_vap_pres:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_vap_pres:bit_3_assessment = "Bad" ;
	float bar_pres(time, height) ;
		bar_pres:long_name = "Barometric pressure" ;
		bar_pres:units = "kPa" ;
		bar_pres:standard_name = "air_pressure" ;
		bar_pres:valid_min = 0.f ;
		bar_pres:valid_max = 110.f ;
		bar_pres:missing_value = -9999.f ;
		bar_pres:ancillary_variables = "qc_bar_pres source_bar_pres" ;
	int qc_bar_pres(time, height) ;
		qc_bar_pres:long_name = "Quality check results on variable: Barometric pressure" ;
		qc_bar_pres:units = "1" ;
		qc_bar_pres:standard_name = "quality_flag" ;
		qc_bar_pres:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_bar_pres:flag_method = "bit" ;
		qc_bar_pres:bit_1_description = "Value is less than the valid_min." ;
		qc_bar_pres:bit_1_assessment = "Indeterminate" ;
		qc_bar_pres:bit_2_description = "Value is greater than the valid_max." ;
		qc_bar_pres:bit_2_assessment = "Indeterminate" ;
		qc_bar_pres:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_bar_pres:bit_3_assessment = "Bad" ;
	int source_bar_pres(time, height) ;
		source_bar_pres:long_name = "Source for variable:Barometric pressure" ;
		source_bar_pres:units = "1" ;
		source_bar_pres:description = "This field contains integer values which should be interpreted as listed." ;
		source_bar_pres:flag_method = "integer" ;
		source_bar_pres:flag_0_description = "griddedsonde.c0:bar_pres" ;
		source_bar_pres:flag_1_description = "interpolated" ;
		source_bar_pres:missing_value = -9999 ;
	float wspd(time, height) ;
		wspd:long_name = "Wind speed" ;
		wspd:units = "m s-1" ;
		wspd:standard_name = "wind_speed" ;
		wspd:valid_min = 0.f ;
		wspd:valid_max = 100.f ;
		wspd:missing_value = -9999.f ;
		wspd:ancillary_variables = "qc_wspd" ;
	int qc_wspd(time, height) ;
		qc_wspd:long_name = "Quality check results on variable: Wind speed" ;
		qc_wspd:units = "1" ;
		qc_wspd:standard_name = "quality_flag" ;
		qc_wspd:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_wspd:flag_method = "bit" ;
		qc_wspd:bit_1_description = "Value is less than the valid_min." ;
		qc_wspd:bit_1_assessment = "Indeterminate" ;
		qc_wspd:bit_2_description = "Value is greater than the valid_max." ;
		qc_wspd:bit_2_assessment = "Indeterminate" ;
		qc_wspd:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_wspd:bit_3_assessment = "Bad" ;
	float wdir(time, height) ;
		wdir:long_name = "Wind direction" ;
		wdir:units = "degree" ;
		wdir:standard_name = "wind_to_direction" ;
		wdir:valid_min = 0.f ;
		wdir:valid_max = 360.f ;
		wdir:missing_value = -9999.f ;
		wdir:ancillary_variables = "qc_wdir" ;
	int qc_wdir(time, height) ;
		qc_wdir:long_name = "Quality check results on variable: Wind direction" ;
		qc_wdir:units = "1" ;
		qc_wdir:standard_name = "quality_flag" ;
		qc_wdir:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_wdir:flag_method = "bit" ;
		qc_wdir:bit_1_description = "Value is less than the valid_min." ;
		qc_wdir:bit_1_assessment = "Indeterminate" ;
		qc_wdir:bit_2_description = "Value is greater than the valid_max." ;
		qc_wdir:bit_2_assessment = "Indeterminate" ;
		qc_wdir:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_wdir:bit_3_assessment = "Bad" ;
	float u_wind(time, height) ;
		u_wind:long_name = "Eastward wind component" ;
		u_wind:units = "m s-1" ;
		u_wind:valid_min = -75.f ;
		u_wind:valid_max = 75.f ;
		u_wind:missing_value = -9999.f ;
		u_wind:ancillary_variables = "qc_u_wind source_u_wind" ;
		u_wind:standard_name = "eastward_wind" ;
	int qc_u_wind(time, height) ;
		qc_u_wind:long_name = "Quality check results on variable: Eastward wind component" ;
		qc_u_wind:units = "1" ;
		qc_u_wind:standard_name = "quality_flag" ;
		qc_u_wind:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_u_wind:flag_method = "bit" ;
		qc_u_wind:bit_1_description = "Value is less than the valid_min." ;
		qc_u_wind:bit_1_assessment = "Indeterminate" ;
		qc_u_wind:bit_2_description = "Value is greater than the valid_max." ;
		qc_u_wind:bit_2_assessment = "Indeterminate" ;
		qc_u_wind:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_u_wind:bit_3_assessment = "Bad" ;
	int source_u_wind(time, height) ;
		source_u_wind:long_name = "Source for variable:Eastward wind component" ;
		source_u_wind:units = "1" ;
		source_u_wind:description = "This field contains integer values which should be interpreted as listed." ;
		source_u_wind:flag_method = "integer" ;
		source_u_wind:flag_0_description = "griddedsonde.c0:u_wind" ;
		source_u_wind:flag_1_description = "interpolated" ;
		source_u_wind:missing_value = -9999 ;
	float v_wind(time, height) ;
		v_wind:long_name = "Northward wind component" ;
		v_wind:units = "m s-1" ;
		v_wind:valid_min = -75.f ;
		v_wind:valid_max = 75.f ;
		v_wind:missing_value = -9999.f ;
		v_wind:ancillary_variables = "qc_v_wind source_v_wind" ;
		v_wind:standard_name = "northward_wind" ;
	int qc_v_wind(time, height) ;
		qc_v_wind:long_name = "Quality check results on variable: Northward wind component" ;
		qc_v_wind:units = "1" ;
		qc_v_wind:standard_name = "quality_flag" ;
		qc_v_wind:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_v_wind:flag_method = "bit" ;
		qc_v_wind:bit_1_description = "Value is less than the valid_min." ;
		qc_v_wind:bit_1_assessment = "Indeterminate" ;
		qc_v_wind:bit_2_description = "Value is greater than the valid_max." ;
		qc_v_wind:bit_2_assessment = "Indeterminate" ;
		qc_v_wind:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_v_wind:bit_3_assessment = "Bad" ;
	int source_v_wind(time, height) ;
		source_v_wind:long_name = "Source for variable:Northward wind component" ;
		source_v_wind:units = "1" ;
		source_v_wind:description = "This field contains integer values which should be interpreted as listed." ;
		source_v_wind:flag_method = "integer" ;
		source_v_wind:flag_0_description = "griddedsonde.c0:v_wind" ;
		source_v_wind:flag_1_description = "interpolated" ;
		source_v_wind:missing_value = -9999 ;
	float dp(time, height) ;
		dp:long_name = "Dewpoint temperature" ;
		dp:units = "degC" ;
		dp:valid_min = -110.f ;
		dp:valid_max = 50.f ;
		dp:missing_value = -9999.f ;
		dp:ancillary_variables = "qc_dp source_dp" ;
		dp:standard_name = "dew_point_temperature" ;
	int qc_dp(time, height) ;
		qc_dp:long_name = "Quality check results on variable: Dewpoint temperature" ;
		qc_dp:units = "1" ;
		qc_dp:standard_name = "quality_flag" ;
		qc_dp:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_dp:flag_method = "bit" ;
		qc_dp:bit_1_description = "Value is less than the valid_min." ;
		qc_dp:bit_1_assessment = "Indeterminate" ;
		qc_dp:bit_2_description = "Value is greater than the valid_max." ;
		qc_dp:bit_2_assessment = "Indeterminate" ;
		qc_dp:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_dp:bit_3_assessment = "Bad" ;
	int source_dp(time, height) ;
		source_dp:long_name = "Source for variable:Dewpoint temperature" ;
		source_dp:units = "1" ;
		source_dp:description = "This field contains integer values which should be interpreted as listed." ;
		source_dp:flag_method = "integer" ;
		source_dp:flag_0_description = "griddedsonde.c0:dp" ;
		source_dp:flag_1_description = "interpolated" ;
		source_dp:missing_value = -9999 ;
	float potential_temp(time, height) ;
		potential_temp:long_name = "Potential temperature" ;
		potential_temp:units = "K" ;
		potential_temp:missing_value = -9999.f ;
		potential_temp:ancillary_variables = "qc_potential_temp" ;
		potential_temp:standard_name = "air_potential_temperature" ;
	int qc_potential_temp(time, height) ;
		qc_potential_temp:long_name = "Quality check results on variable: Potential temperature" ;
		qc_potential_temp:units = "1" ;
		qc_potential_temp:standard_name = "quality_flag" ;
		qc_potential_temp:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_potential_temp:flag_method = "bit" ;
		qc_potential_temp:bit_1_description = "Not used" ;
		qc_potential_temp:bit_1_assessment = "Bad" ;
		qc_potential_temp:bit_2_description = "Not used" ;
		qc_potential_temp:bit_2_assessment = "Bad" ;
		qc_potential_temp:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_potential_temp:bit_3_assessment = "Bad" ;
	float sh(time, height) ;
		sh:long_name = "Specific humidity" ;
		sh:units = "g/g" ;
		sh:missing_value = -9999.f ;
		sh:ancillary_variables = "qc_sh" ;
		sh:standard_name = "specific_humidity" ;
	int qc_sh(time, height) ;
		qc_sh:long_name = "Quality check results on variable: Specific humidity" ;
		qc_sh:units = "1" ;
		qc_sh:standard_name = "quality_flag" ;
		qc_sh:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_sh:flag_method = "bit" ;
		qc_sh:bit_1_description = "Not used" ;
		qc_sh:bit_1_assessment = "Bad" ;
		qc_sh:bit_2_description = "Not used" ;
		qc_sh:bit_2_assessment = "Bad" ;
		qc_sh:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_sh:bit_3_assessment = "Bad" ;
	float rh_scaled(time, height) ;
		rh_scaled:long_name = "Relative humidity scaled using MWR" ;
		rh_scaled:units = "%" ;
		rh_scaled:valid_min = 0.f ;
		rh_scaled:valid_max = 105.f ;
		rh_scaled:missing_value = -9999.f ;
		rh_scaled:ancillary_variables = "aqc_rh_scaled qc_rh_scaled vapor_source" ;
	int qc_rh_scaled(time, height) ;
		qc_rh_scaled:long_name = "Quality check results on variable: Relative humidity scaled using MWR" ;
		qc_rh_scaled:units = "1" ;
		qc_rh_scaled:standard_name = "quality_flag" ;
		qc_rh_scaled:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_rh_scaled:flag_method = "bit" ;
		qc_rh_scaled:bit_1_description = "Value is less than the valid_min." ;
		qc_rh_scaled:bit_1_assessment = "Indeterminate" ;
		qc_rh_scaled:bit_2_description = "Value is greater than the valid_max." ;
		qc_rh_scaled:bit_2_assessment = "Indeterminate" ;
		qc_rh_scaled:bit_3_description = "Data value not available in input file, data value has been set to missing_value." ;
		qc_rh_scaled:bit_3_assessment = "Bad" ;
	int aqc_rh_scaled(time, height) ;
		aqc_rh_scaled:long_name = "Quality check results" ;
		aqc_rh_scaled:units = "1" ;
		aqc_rh_scaled:standard_name = "quality_flag" ;
		aqc_rh_scaled:description = "This field contains integer values indicating the results of QC test on the data. Non-zero integers indicate the QC condition given in the description for those integers; a value of 0 indicates the data has not failed any QC tests." ;
		aqc_rh_scaled:flag_method = "integer" ;
		aqc_rh_scaled:flag_1_description = "Scale factor less than valid min, so RH has been scaled by interpolation of nearest valid scale factors" ;
		aqc_rh_scaled:flag_1_assessment = "Indeterminate" ;
		aqc_rh_scaled:flag_2_description = "Scale factor greater than valid max, so RH has been scaled by interpolation of nearest valid scale factors" ;
		aqc_rh_scaled:flag_2_assessment = "Indeterminate" ;
		aqc_rh_scaled:flag_3_description = "Scale factor less than valid min, but interpolation of nearest scale factors failed, so RH has not been scaled" ;
		aqc_rh_scaled:flag_3_assessment = "Indeterminate" ;
		aqc_rh_scaled:flag_4_description = "Scale factor greater than valid max, but interpolation of nearest scale factors failed, so RH has not been scaled" ;
		aqc_rh_scaled:flag_4_assessment = "Indeterminate" ;
		aqc_rh_scaled:flag_5_description = "Vapor unavailable, so RH has not been scaled" ;
		aqc_rh_scaled:flag_5_assessment = "Indeterminate" ;
		aqc_rh_scaled:flag_6_description = "RH not available in input file, data value has been set to missing_value." ;
		aqc_rh_scaled:flag_6_assessment = "Bad" ;
	int vapor_source(time, height) ;
		vapor_source:long_name = "Source of the MWR data used to produce: rh_scaled" ;
		vapor_source:units = "1" ;
		vapor_source:description = "This field contains integer values which should be interpreted as listed." ;
		vapor_source:flag_method = "integer" ;
		vapor_source:flag_0_description = "mwrret1liljclou.c1:be_pwv" ;
		vapor_source:flag_1_description = "mwrret1liljclou.c1:be_pwv interpolated" ;
		vapor_source:flag_2_description = "mwrlos.b1:vap" ;
		vapor_source:flag_3_description = "mwrlos.b1:vap interpolated" ;
		vapor_source:flag_4_description = "No vapor data" ;
	float lat ;
		lat:long_name = "North latitude" ;
		lat:units = "degree_N" ;
		lat:valid_min = -90.f ;
		lat:valid_max = 90.f ;
		lat:standard_name = "latitude" ;
	float lon ;
		lon:long_name = "East longitude" ;
		lon:units = "degree_E" ;
		lon:valid_min = -180.f ;
		lon:valid_max = 180.f ;
		lon:standard_name = "longitude" ;
	float alt ;
		alt:long_name = "Altitude above mean sea level" ;
		alt:units = "m" ;
		alt:standard_name = "altitude" ;

// global attributes:
		:command_line = "idl -R -n interpolatedsonde -s ena -f C1 -b 20240424 -P -n interpolatedsonde" ;
		:Conventions = "ARM-1.3" ;
		:process_version = "vap-interpolatedsonde-7.1-1.el7" ;
		:dod_version = "interpolatedsonde-c1-4.2" ;
		:input_datastreams = "enagriddedsondeC1.c0 : 3.2 : 20240422.000030-20240426.000030\n",
			"enametC1.b1 : 4.53 : 20240422.000000-20240426.000000" ;
		:site_id = "ena" ;
		:platform_id = "interpolatedsonde" ;
		:facility_id = "C1" ;
		:data_level = "c1" ;
		:location_description = "Eastern North Atlantic (ENA), Graciosa Island, Azores" ;
		:datastream = "enainterpolatedsondeC1.c1" ;
		:doi = "10.5439/1095316" ;
		:history = "created by user dsmgr on machine prod-proc2.adc.arm.gov at 2024-05-02 19:13:10, using vap-interpolatedsonde-7.1-1.el7" ;
}