netcdf coraafcpcuF1.b1.20181208.160602 { dimensions: time = UNLIMITED ; // (12273 currently) variables: int base_time ; base_time:string = "2018-12-08 00:00:00 0:00" ; base_time:long_name = "Base time in Epoch" ; base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ; base_time:ancillary_variables = "time_offset" ; double time_offset(time) ; time_offset:long_name = "Time offset from base_time" ; time_offset:units = "seconds since 2018-12-08 00:00:00 0:00" ; time_offset:ancillary_variables = "base_time" ; double time(time) ; time:long_name = "Time offset from midnight" ; time:units = "seconds since 2018-12-08 00:00:00 0:00" ; time:calendar = "gregorian" ; time:standard_name = "time" ; float concentration(time) ; concentration:long_name = "Concentration" ; concentration:units = "1/cm^3" ; concentration:ancillary_variables = "qc_concentration" ; concentration:missing_value = -9999.f ; concentration:valid_min = 50.f ; concentration:valid_max = 99000.f ; int qc_concentration(time) ; qc_concentration:long_name = "Quality check results on field: Concentration" ; qc_concentration:units = "unitless" ; qc_concentration:description = "This field contains bit packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_concentration:saturator_temp_min_alarm = 35.f ; qc_concentration:saturator_temp_max_alarm = 45.f ; qc_concentration:condenser_temp_min_alarm = 9.5f ; qc_concentration:condenser_temp_max_alarm = 10.5f ; qc_concentration:flow_min_alarm = 3.f ; qc_concentration:flow_max_alarm = 10.f ; qc_concentration:flag_method = "bit" ; qc_concentration:bit_1_description = "Value is equal to missing_value." ; qc_concentration:bit_1_assessment = "Bad" ; qc_concentration:bit_2_description = "Value is less than the valid_min." ; qc_concentration:bit_2_assessment = "Bad" ; qc_concentration:bit_3_description = "Value is greater than the valid_max." ; qc_concentration:bit_3_assessment = "Bad" ; qc_concentration:bit_4_description = "saturator_temp < saturator_temp_min_alarm OR saturator_temp > saturator_temp_max_alarm" ; qc_concentration:bit_4_assessment = "Bad" ; qc_concentration:bit_5_description = "condenser_temp < condenser_temp_min_alarm OR condenser_temp > condenser_temp_max_alarm" ; qc_concentration:bit_5_assessment = "Bad" ; qc_concentration:bit_6_description = "flow < flow_min_alarm OR flow > flow_max_alarm" ; qc_concentration:bit_6_assessment = "Bad" ; float count(time) ; count:long_name = "Total number of counts" ; count:units = "count" ; count:missing_value = -9999.f ; int liquid_level_state(time) ; liquid_level_state:long_name = "Liquid level state" ; liquid_level_state:units = "unitless" ; liquid_level_state:missing_value = -9999 ; liquid_level_state:flag_values = 0, 1 ; liquid_level_state:flag_meanings = "liquid_not_full liquid_full" ; float condenser_temperature(time) ; condenser_temperature:long_name = "Condenser temperature" ; condenser_temperature:units = "degC" ; condenser_temperature:missing_value = -9999.f ; float saturator_temperature(time) ; saturator_temperature:long_name = "Saturator temperature" ; saturator_temperature:units = "degC" ; saturator_temperature:missing_value = -9999.f ; float optics_temperature(time) ; optics_temperature:long_name = "Optics temperature" ; optics_temperature:units = "degC" ; optics_temperature:missing_value = -9999.f ; float flow(time) ; flow:long_name = "Main flow rate" ; flow:units = "cm^3/s" ; flow:missing_value = -9999.f ; float capillary_flow(time) ; capillary_flow:long_name = "Capillary flow rate" ; capillary_flow:units = "cm^3/s" ; capillary_flow:missing_value = -9999.f ; int environment_state(time) ; environment_state:long_name = "CPC working environment state" ; environment_state:units = "unitless" ; environment_state:missing_value = -9999 ; environment_state:comment = "Ready state implies that all parameters are in the operating range" ; environment_state:flag_values = 0, 1 ; environment_state:flag_meanings = "not_ready ready" ; float reference_voltage(time) ; reference_voltage:long_name = "Reference voltage" ; reference_voltage:units = "V" ; reference_voltage:missing_value = -9999.f ; float detector_voltage(time) ; detector_voltage:long_name = "Detector voltage" ; detector_voltage:units = "V" ; detector_voltage:missing_value = -9999.f ; int pump_motor_state(time) ; pump_motor_state:long_name = "Pump motor setting" ; pump_motor_state:units = "unitless" ; pump_motor_state:missing_value = -9999 ; pump_motor_state:flag_values = 0, 1 ; pump_motor_state:flag_meanings = "external_pump internal_pump" ; double lat(time) ; lat:long_name = "North latitude" ; lat:units = "degree_N" ; lat:valid_min = -33.5 ; lat:valid_max = -31. ; lat:missing_value = -9999. ; lat:standard_name = "latitude" ; lat:source = "coraafnavdsm10hzF1.a1:lat" ; lat:ancillary_variables = "qc_lat" ; int qc_lat(time) ; qc_lat:long_name = "Quality check results on field: North latitude" ; qc_lat:units = "unitless" ; qc_lat:description = "This field contains bit packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_lat:flag_method = "bit" ; qc_lat:bit_1_description = "Value is equal to missing_value." ; qc_lat:bit_1_assessment = "Bad" ; qc_lat:bit_2_description = "Value is less than the valid_min." ; qc_lat:bit_2_assessment = "Bad" ; qc_lat:bit_3_description = "Value is greater than the valid_max." ; qc_lat:bit_3_assessment = "Bad" ; double lon(time) ; lon:long_name = "East longitude" ; lon:units = "degree_E" ; lon:valid_min = -65.5 ; lon:valid_max = -63.5 ; lon:missing_value = -9999. ; lon:standard_name = "longitude" ; lon:source = "coraafnavdsm10hzF1.a1:lon" ; lon:ancillary_variables = "qc_lon" ; int qc_lon(time) ; qc_lon:long_name = "Quality check results on field: East longitude" ; qc_lon:units = "unitless" ; qc_lon:description = "This field contains bit packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_lon:flag_method = "bit" ; qc_lon:bit_1_description = "Value is equal to missing_value." ; qc_lon:bit_1_assessment = "Bad" ; qc_lon:bit_2_description = "Value is less than the valid_min." ; qc_lon:bit_2_assessment = "Bad" ; qc_lon:bit_3_description = "Value is greater than the valid_max." ; qc_lon:bit_3_assessment = "Bad" ; double alt(time) ; alt:long_name = "Altitude above mean sea level" ; alt:units = "m" ; alt:valid_min = 0. ; alt:valid_max = 8000. ; alt:missing_value = -9999. ; alt:standard_name = "altitude" ; alt:source = "coraafnavdsm10hzF1.a1:alt" ; alt:ancillary_variables = "qc_alt" ; int qc_alt(time) ; qc_alt:long_name = "Quality check results on field: Altitude above mean sea level" ; qc_alt:units = "unitless" ; qc_alt:description = "This field contains bit packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ; qc_alt:flag_method = "bit" ; qc_alt:bit_1_description = "Value is equal to missing_value." ; qc_alt:bit_1_assessment = "Bad" ; qc_alt:bit_2_description = "Value is less than the valid_min." ; qc_alt:bit_2_assessment = "Bad" ; qc_alt:bit_3_description = "Value is greater than the valid_max." ; qc_alt:bit_3_assessment = "Bad" ; // global attributes: :command_line = "aafcpcucorr -s cor -f F1 -DR" ; :Conventions = "ARM-1.2" ; :process_version = "ingest-aafcpcucorr-2.0-0.el6" ; :dod_version = "aafcpcu-b1-1.0" ; :site_id = "cor" ; :platform_id = "aafcpcu" ; :facility_id = "F1" ; :data_level = "b1" ; :location_description = "Cloud, Aerosol, and Complex Terrain Interactions (CACTI), Gulfstream 159 (\"G1\") Aircraft" ; :datastream = "coraafcpcuF1.b1" ; :input_datastreams = "coraafcpcuF1.a1 : 1.1 : 20181208.154555\n", "coraafnavF1.b1 : 1.1 : 20181208.160602" ; :doi = "10.5439/1349237" ; :history = "created by user dsmgr on machine ruby at 2019-01-11 20:33:52, using ingest-aafcpcucorr-2.0-0.el6" ; }