DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D150130.3 | ENA/DL/C1 - Instrument down due to power supply failure | enadlcal2C1.b1, enadlfptC1.b1, enadlcal1C1.b1 | Missing |
D150526.6 | ENA/DL/C1 - System down due to power supply issue | enadlcal2C1.b1, enadlfptC1.b1, enadlcal1C1.b1 | Missing |
D160106.1 | ENA/MAO/OLI/PGH/PVC/SGP/TWP/DLPROF/C1/C3/M1 - Reprocess: Suspect error estimates | enadlprofwind4newsC1.c1 | Suspect |
D160122.2 | ENA/DL/C1 - Instrument removed for hurricane | enadlcal2C1.b1, enadlcal1C1.b1, enadlfptC1.b1 | Missing |
D160211.3 | ENA/DL/DLPROF/C1 - Reprocess: Azimuth calibration off | enadlprofwind4newsC1.c1, enadlcal2C1.b1 | Incorrect |
D160520.10 | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number | enadlfptC1.b1, enadlcal1C1.b1, enadlrhiC1.b1, enadlprofwind4newsC1.c1, enadlprofwstats4newsC1.c1, enadlcal2C1.b1 | Does not affect quality |
D170103.1 | ENA/DL/C1 - Collection | enadlfptC1.b1, enadlcal1C1.b1, enadlrhiC1.b1, enadlauxC1.a0, enadlcal2C1.b1 | Missing |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/30/2014 | 0400 | 01/26/2015 | 1352 | Missing |
Subject: | ENA/DL/C1 - Instrument down due to power supply failure |
DataStreams: | enadlcal2C1.b1, enadlfptC1.b1, enadlcal1C1.b1 |
Description: | No data was collected during the period in question because the instrument was down due to a power supply failure. |
Measurements: | enadlcal2C1.b1:
enadlcal1C1.b1:
enadlfptC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
05/20/2015 | 2200 | 05/22/2015 | 1345 | Missing |
Subject: | ENA/DL/C1 - System down due to power supply issue |
DataStreams: | enadlcal2C1.b1, enadlfptC1.b1, enadlcal1C1.b1 |
Description: | The system was down during the period in question due to an issue with the power supply. |
Measurements: | enadlcal2C1.b1:
enadlcal1C1.b1:
enadlfptC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/01/2010 | 0000 | 07/20/2016 | 0000 | Suspect |
Subject: | ENA/MAO/OLI/PGH/PVC/SGP/TWP/DLPROF/C1/C3/M1 - Reprocess: Suspect error estimates |
DataStreams: | enadlprofwind4newsC1.c1 |
Description: | The current dlprofwind4news VAP generates time- and height-resolved estimates of wind speed, wind direction, and corresponding uncertainties from Doppler lidar PPI scans. A recent comparison with a heavily instrumented tall tower (BAO) has shown that the error estimates are biased low and exhibit poor correlation with the observed lidar-tower differences. We note that the measurements themselves (i.e. wind speed and direction) are minimally affected by this issue. |
Measurements: | enadlprofwind4newsC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/14/2016 | 0000 | 01/18/2016 | 1628 | Missing |
Subject: | ENA/DL/C1 - Instrument removed for hurricane |
DataStreams: | enadlcal2C1.b1, enadlcal1C1.b1, enadlfptC1.b1 |
Description: | The instrument was taken offline and stored indoors to avoid potential damage during a hurricane passage. |
Measurements: | enadlcal2C1.b1:
enadlcal1C1.b1:
enadlfptC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/18/2016 | 1600 | 02/11/2016 | 2359 | Incorrect |
Subject: | ENA/DL/DLPROF/C1 - Reprocess: Azimuth calibration off |
DataStreams: | enadlprofwind4newsC1.c1, enadlcal2C1.b1 |
Description: | The azimuth calibration is off by ~2deg. This happened after the system was reinstalled following the recent hurricane. All scanning data and wind VAP data will be reprocessed. |
Measurements: | enadlcal2C1.b1:
enadlprofwind4newsC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/21/2014 | 0000 | 05/19/2016 | 2200 | Does not affect quality |
Subject: | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number |
DataStreams: | enadlfptC1.b1, enadlcal1C1.b1, enadlrhiC1.b1, enadlprofwind4newsC1.c1, enadlprofwstats4newsC1.c1, enadlcal2C1.b1 |
Description: | The instrument serial number that appears in the netcdf files global attributes is incorrect. The correct serial number is 0514-84. |
Measurements: | enadlcal2C1.b1:
enadlcal1C1.b1:
enadlrhiC1.b1:
enadlfptC1.b1:
enadlprofwind4newsC1.c1:
enadlprofwstats4newsC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/21/2016 | 1600 | 01/03/2017 | 1059 | Missing |
Subject: | ENA/DL/C1 - Collection |
DataStreams: | enadlfptC1.b1, enadlcal1C1.b1, enadlrhiC1.b1, enadlauxC1.a0, enadlcal2C1.b1 |
Description: | Data are missing due to instrument malfunction. |
Measurements: | enadlcal2C1.b1:
enadlauxC1.a0:
enadlcal1C1.b1:
enadlrhiC1.b1:
enadlfptC1.b1:
|