DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D131126.1 | OLI/CEIL/M1 - Intermittent data | oliceilM1.b1 | Suspect |
D140423.3 | OLI/CEIL/M1 - Window blower failure | oliceilM1.b1 | Suspect |
D141016.7 | OLI/CEIL/M1 - power failure | oliceilM1.b1 | Missing |
D150123.8 | OLI/CEIL/M1 - Environmental | oliceilM1.b1 | Missing |
D150327.8 | OLI/CEIL/M1 - Environmental conditions caused missing data | oliceilM1.b1 | Missing |
D150417.5 | OLI/CEIL/M1 - Environmental conditions resulted in missing data | oliceilM1.b1 | Missing |
D150424.5 | OLI/CEIL/M1 - Environmental | oliceilM1.b1 | Missing |
D160427.7 | ENA/C1 - Reprocess: Slightly incorrect location fields | enaceilC1.b1 | Suspect |
D160826.2 | AWR/CEIL/M1 - Window contamination | awrceilM1.b1 | Suspect |
D160907.4 | ENA/CEIL/C1 - Data system upgrade | enaceilC1.b1 | Missing |
D160913.3 | AWR/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute | awrceilS1.b1 | Does not affect quality |
D160914.1 | ASI/CEIL/M1 - data communication | asiceilM1.b1 | Suspect |
D170110.1 | OLI/M1 - Severe Storm | oliceilM1.b1 | Does not affect quality |
D170316.1 | ASI/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute | asiceilS1.b1 | Does not affect quality |
D170320.6 | OLI/ALL/M1 - Power Outage | oliceilM1.b1 | Does not affect quality |
D170412.1 | MCQ/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute | mcqceilS1.b1 | Does not affect quality |
D170512.11 | MCQ/CEIL/S1 - Data collection issue | mcqceilS1.b1 | Missing |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
11/12/2013 | 1832 | 11/25/2013 | 2238 | Suspect |
Subject: | OLI/CEIL/M1 - Intermittent data |
DataStreams: | oliceilM1.b1 |
Description: | The data were intermittent. The serial cable was incorrectly wired which affected the grounding of the signal, apparently due to cold temperatures, causing checksum errors. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/21/2014 | 0400 | 04/13/2014 | 0000 | Suspect |
Subject: | OLI/CEIL/M1 - Window blower failure |
DataStreams: | oliceilM1.b1 |
Description: | |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/09/2014 | 1128 | 10/10/2014 | 2042 | Missing |
Subject: | OLI/CEIL/M1 - power failure |
DataStreams: | oliceilM1.b1 |
Description: | The site data system experienced a power failure. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/31/2014 | 0300 | 01/08/2015 | 2041 | Missing |
01/17/2015 | 1300 | 01/17/2015 | 1945 | Missing |
01/13/2015 | 0000 | 01/16/2015 | 1432 | Missing |
Subject: | OLI/CEIL/M1 - Environmental |
DataStreams: | oliceilM1.b1 |
Description: | Site lost power. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/01/2015 | 0300 | 03/18/2015 | 1700 | Missing |
Subject: | OLI/CEIL/M1 - Environmental conditions caused missing data |
DataStreams: | oliceilM1.b1 |
Description: | Extreme weather prevented fueling of the emergency generator that was providing site power. The site data system was gracefully shut down. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/30/2015 | 2000 | 04/01/2015 | 2334 | Missing |
Subject: | OLI/CEIL/M1 - Environmental conditions resulted in missing data |
DataStreams: | oliceilM1.b1 |
Description: | A transient power anomaly occurred and severe weather prevented site operators from getting to the site. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/19/2015 | 1328 | 04/21/2015 | 1804 | Missing |
Subject: | OLI/CEIL/M1 - Environmental |
DataStreams: | oliceilM1.b1 |
Description: | The site was without power. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/29/2013 | 0941 | 04/30/2016 | 2359 | Suspect |
Subject: | ENA/C1 - Reprocess: Slightly incorrect location fields |
DataStreams: | enaceilC1.b1 |
Description: | Some of the instruments are being processed with the previous "GRW-Azores" lat/lon/alt instead of the new "ENA-Azores" lat/lon/alt. The differences are minor, but will be corrected. The respective GRW and ENA lat, lon, and alt values are as follows: GRW lat = 39.0911 ; ENA lat = 39.0916 ; GRW lon = -28.0297 ; ENA lon = -28.0257 ; GRW alt = 26 ; ENA alt = 30.48 ; |
Measurements: | enaceilC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
08/21/2016 | 2113 | 08/26/2016 | 0000 | Suspect |
Subject: | AWR/CEIL/M1 - Window contamination |
DataStreams: | awrceilM1.b1 |
Description: | The blower failed allowing contamination of the window. The blower was replaced. |
Measurements: | awrceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
08/22/2016 | 0943 | 08/23/2016 | 1849 | Missing |
Subject: | ENA/CEIL/C1 - Data system upgrade |
DataStreams: | enaceilC1.b1 |
Description: | Data lost during the site data system upgrade. |
Measurements: | enaceilC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/03/2015 | 2107 | 01/17/2016 | 2359 | Does not affect quality |
Subject: | AWR/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute |
DataStreams: | awrceilS1.b1 |
Description: | When the ceilometer software was changed from CT-View to CL-View, several firmware configuration changes were made to the model CT25K for consistency with the CL31 at other sites, including the data acquisition interval which was changed from 15 to 16 seconds. However, the global attribute "averaging_interval" in the ceil datastream was not changed. |
Measurements: | awrceilS1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
07/12/2016 | 2000 | 08/14/2016 | 0459 | Suspect |
Subject: | ASI/CEIL/M1 - data communication |
DataStreams: | asiceilM1.b1 |
Description: | The data were intermittent, especially on 7/19/2016, due to poor serial communication. The cable was repaired on 7/21 and the serial device server and instrument were power-cycled on 7/28. |
Measurements: | asiceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/05/2017 | 1000 | 01/08/2017 | 1200 | Does not affect quality |
Subject: | OLI/M1 - Severe Storm |
DataStreams: | oliceilM1.b1 |
Description: | The site lost power during a severe winter storm. Operators on site were not able to get out and restart the generators to bring things back up until 1/7/2017. Most of the instruments were brought up at this time, but some problems remained until 1/8/2017 |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
05/24/2016 | 1730 | 11/14/2016 | 1559 | Does not affect quality |
Subject: | ASI/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute |
DataStreams: | asiceilS1.b1 |
Description: | When the ceilometer software was changed from CT-View to CL-View, several firmware configuration changes were made to the model CT25K for consistency with the CL31 at other sites, including the data acquisition interval which was changed from 15 to 16 seconds. However, the global attribute "averaging_interval" in the ceil datastream was not changed. |
Measurements: | asiceilS1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/06/2017 | 1847 | 03/09/2017 | 2335 | Does not affect quality |
Subject: | OLI/ALL/M1 - Power Outage |
DataStreams: | oliceilM1.b1 |
Description: | OLI suffered from a prolonged power outage. The instruments were brought back up over the course of 3/9 so the end date will be different for each instrument. Any problems with the instruments after being brought back online will be covered by separate DQRs. |
Measurements: | oliceilM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
06/02/2016 | 0000 | 08/24/2016 | 2359 | Does not affect quality |
04/02/2016 | 0627 | 04/06/2016 | 2359 | Does not affect quality |
Subject: | MCQ/CEIL/S1 - Reprocess: Incorrect averaging_inverval global attribute |
DataStreams: | mcqceilS1.b1 |
Description: | When the ceilometer software was changed from CT-View to CL-View, several firmware configuration changes were made to the model CT25K for consistency with the CL31 at other sites, including the data acquisition interval which was changed from 15 to 16 seconds. However, the global attribute "averaging_interval" in the ceil datastream was not changed. |
Measurements: | mcqceilS1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/14/2016 | 1649 | 02/22/2017 | 2300 | Missing |
Subject: | MCQ/CEIL/S1 - Data collection issue |
DataStreams: | mcqceilS1.b1 |
Description: | These data were not received at the Data Management Facility. |
Measurements: | mcqceilS1.b1:
|