Measurements: | twpmplC3.00: - null(Raw data stream - documentation not supported)
twpmplpolavgC3.c1: - Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
- *(aqc_signal_return_cross_pol)
- Laser output energy per pulse(energy_monitor)
- lat(lat)
- Background signal, co-pol(background_signal_co_pol)
- time(time)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Array of heights for the range gates(height)
- Attenuated backscatter, co-pol(signal_return_co_pol)
- range(range)
- Number of bins stored in data block(num_bins)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Number of detector channels(num_channels)
- Time offset of tweaks from base_time(time_offset)
- Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
- Attenuated backscatter, cross-pol(signal_return_cross_pol)
- Number of laser pulses summed during averaging interval(shots_per_sample)
- Number of samples used for co-pol averages(nsamples_co_pol_average)
- Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
- lon(lon)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- base time(base_time)
- Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
- Dummy altitude for Zeb(alt)
- Background signal standard deviation, co-pol(background_signal_std_co_pol)
- Telescope temperature(scope_temp)
- Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
- *(aqc_signal_return_co_pol)
- effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
- Background signal, cross-pol(background_signal_cross_pol)
- Dead time correction flag(dead_time_corrected)
- Number of samples used for cross-pol averages(nsamples_cross_pol_average)
- Laser Temperature(laser_temp)
- Detector Temperature(detector_temp)
twpmplpolC3.00: - Raw data stream - documentation not supported(raw)
twpmplC3.a1: - lon(lon)
- time(time)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Voltage level which operates the thermistor(voltage_10)
- Dummy altitude for Zeb(alt)
- Detector Temperature(detector_temp)
- Attenuated backscatter(detector_counts)
- Array of heights for the range gates(height)
- range(range)
- Instrument Temperature(instrument_temp)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- Number of laser shots recorded(shots_summed)
- Preliminary cloud base height(preliminary_cbh)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Laser Temperature(laser_temp)
- Time offset of tweaks from base_time(time_offset)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Background Signal(background_signal)
- effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
- Filter Temperature(filter_temp)
- Assumed zero-range bin number\(assumed_zero_range_bin)
- base time(base_time)
- lat(lat)
- Voltage level which operates the A/D card and the detector(voltage_05)
- Voltage level which operates the energy monitor(voltage_15)
- Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
- Laser output energy per pulse(energy_monitor)
twpmplpolC3.b1: - Number of laser pulses summed during averaging interval(shots_per_avg)
- Attenuated backscatter(signal_return)
- Detector Temperature(detector_temp)
- Polarization control voltage setting(polarization_control_voltage)
- Dead time correction flag(dead_time_corrected)
- time(time)
- Telescope temperature(scope_temp)
- Polarization control enabled flag(polarization_control)
- base time(base_time)
- Laser Temperature(laser_temp)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
- range(range)
- Laser output energy per pulse(energy_monitor)
- Number of bins stored in data block(num_bins)
- Number of detector channels(num_channels)
- Array of heights for the range gates(height)
- Preliminary cloud base height(preliminary_cbh)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Background signal standard deviation(background_signal_std)
- Dummy altitude for Zeb(alt)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- Background Signal(background_signal)
- lat(lat)
- Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
- lon(lon)
- Time offset of tweaks from base_time(time_offset)
twpmplpolavgC3.s1: - Background signal standard deviation, co-pol(background_signal_std_co_pol)
- Attenuated backscatter, cross-pol(signal_return_cross_pol)
- Laser output energy per pulse(energy_monitor)
- Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
- Detector Temperature(detector_temp)
- lat(lat)
- effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
- Background signal, co-pol(background_signal_co_pol)
- Time offset of tweaks from base_time(time_offset)
- *(aqc_signal_return_cross_pol)
- Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
- Number of laser pulses summed during averaging interval(shots_per_sample)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- Dummy altitude for Zeb(alt)
- Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
- range(range)
- Number of samples used for cross-pol averages(nsamples_cross_pol_average)
- Dead time correction flag(dead_time_corrected)
- Laser Temperature(laser_temp)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Attenuated backscatter, co-pol(signal_return_co_pol)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Number of samples used for co-pol averages(nsamples_co_pol_average)
- time(time)
- Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
- *(aqc_signal_return_co_pol)
- Number of bins stored in data block(num_bins)
- Background signal, cross-pol(background_signal_cross_pol)
- Number of detector channels(num_channels)
- Array of heights for the range gates(height)
- Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
- lon(lon)
- Telescope temperature(scope_temp)
- base time(base_time)
|