DQR ID | Subject | Data Streams Affected |
---|---|---|
D050928.3 | NSA/MWR/C1 - New software version (4.15) installed | nsamwrlosC1.b1, nsamwrtipC1.a1 |
D050930.1 | NSA/MWR/C1 - Reprocess: wrong calibration | nsamwrlosC1.a1, nsamwrlosC1.b1, nsamwrtipC1.a1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/16/2002 | 1820 | 09/15/2005 | 1702 |
Subject: | NSA/MWR/C1 - New software version (4.15) installed |
DataStreams: | nsamwrlosC1.b1, nsamwrtipC1.a1 |
Description: | A problem began with the installation of MWR.EXE version 4.12 in September 2002. The software had been upgraded from a "DOS" to a "Windows"-compiled program to address an earlier problem. The software upgrade corrected the earlier problem but introduced a new one that caused line-of-sight observing cycles to be skipped, a 15% reduction in the number of tip curves, and saturation of CPU usage. Software versions 4.13 and 4.14 also produced these problems. The new MWR software version (4.15) was installed on 9/15/2005. As a consequence of this upgrade, the tip curve frequency increased. The tip cycle time decreased from ~60s to ~50s. |
Measurements: | nsamwrlosC1.b1:
nsamwrtipC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/01/2005 | 1945 | 09/06/2005 | 1500 |
Subject: | NSA/MWR/C1 - Reprocess: wrong calibration |
DataStreams: | nsamwrlosC1.a1, nsamwrlosC1.b1, nsamwrtipC1.a1 |
Description: | When MWR#20 was returned to service on 9/1/2005, the calibration had changed as a result of the repairs made by Radiometrics and the RF deck temperature had been set to 325K for testing. On 9/2, the temperature was decreased to 307K to prevent thermal instability in winter and the calibration was changed in the configuration file with the values supplied on the repair report. The data need to be reprocessed with the calibration coefficients that were automatically derived after these changes were put into affect. They are: tnd_nom23=185.621, tnd_nom31=158.801, tc23=-0.022, tc31=-0.039. |
Measurements: | nsamwrlosC1.a1:
nsamwrlosC1.b1:
nsamwrtipC1.a1:
|