DQR ID | Subject | Data Streams Affected |
---|---|---|
D960611.3 | bad surface values sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960701.4 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960706.1 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.1 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.2 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.3 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.5 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960927.2 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D970111.1 | Incorrect surface temperature | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D970318.2 | Questionable RH | sgpsondewrpnC1.a1 |
D970507.2 | Jump in pressure value | sgpsondewrpnC1.a1 |
D970624.2 | Incorrect surface values | sgpsondewrpnC1.a1 |
D970625.1 | Bad sounding file CF 970622:0228 | sgpsondewrpnC1.a1 |
D970709.1 | Bad pressure values CF sounding 970704:0525 | sgpsondewrpnC1.a1 |
D970923.2 | Pressure jump at launch | sgpsondewrpnC1.a1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
06/10/1996 | 1730 | 06/10/1996 | 1730 |
Subject: | bad surface values sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface values sounding 06/10/96 17:30 Date Submitted: 6/11/96 Submitted By: Barry Lesht _X_ Instrument Mentor David Glahn ___ EST Member ___ Science Team Member _X_ Other _Site Ops__________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 06/10/96 Time 17:30 (GMT) End Date Time (GMT) Data should be labeled: ___ questionable ___ All data fields affected _X_ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The site operator inadvertently entered incorrect surface met values for the subject sounding. Although he caught the error soon after launch and reported it immediately, it was too late to correct. The following table shows the incorrect (present in the file) and correct values. Incorrect Correct Pressure 1000.0 973.9 Temperature 35.0 30.5 Relative Humidity 27 30 The incorrect values of surface temperature and relative humidity will not affect the other values in the sounding. The incorrect surface pressure will, however, affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
07/01/1996 | 1130 | 07/01/1996 | 1130 |
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding 06/21/96 11:30 Date Submitted: 7/1/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 07/01/96 Time 11:30 (GMT) End Date Time (GMT) Data should be labeled: ___ questionable ___ All data fields affected _X_ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 996.4 hPa. The first pressure value reported by the sonde is 972.3 hPa. The surface pressure at 05:30 was 972.3 and at 14:46 was 976.1. It appears that the operator entered the sea-level pressure rather than the station pressure. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
07/04/1996 | 1728 | 07/04/1996 | 1728 |
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding 07/04/96 17:28 Date Submitted: 7/6/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 07/04/96 Time 17:28 (GMT) End Date Time (GMT) Data should be labeled: ___ questionable ___ All data fields affected _X_ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 995.4 hPa. The first pressure value reported by the sonde is 970.1 hPa. The surface pressure at 14:30 was 972.3 and at 20:27 was 971.1. It appears that the operator entered the sea-level pressure rather than the station pressure. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. Data Processing Notes Date |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/09/1996 | 1429 | 09/09/1996 | 1429 |
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding C1 09/09/96:14:29 Date Submitted: 9/9/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 09/09/96 Time 14:29 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 1001.4 hPa. The first pressure value reported by the sonde is 979.7 hPa. It appears that the operator incorrectly entered sea-level pressure obtained from the WeatherMeasure set rather than surface pressure obtained from the radiosonde. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/09/1996 | 1731 | 09/09/1996 | 1731 |
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding C1 09/09/96:17:31 Date Submitted: 9/9/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 09/09/96 Time 17:31 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 1001.5 hPa. The first pressure value reported by the sonde is 978.9 hPa. It appears that the operator incorrectly entered sea-level pressure obtained from the WeatherMeasure set rather than surface pressure obtained from the radiosonde. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. Data Processing Notes Date ----- End Included Message ----- |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/09/1996 | 2029 | 09/09/1996 | 2029 |
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding C1 09/09/96:20:29 Date Submitted: 9/9/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 09/09/96 Time 20:29 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 999.4 hPa. The first pressure value reported by the sonde is 975.4 hPa. It appears that the operator incorrectly entered sea-level pressure obtained from the WeatherMeasure set rather than surface pressure obtained from the radiosonde. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/12/1996 | 0830 | 09/12/1996 | 0830 |
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding C1 09/12/96:0830 Date Submitted: 9/13/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 012/96 Time 08:30 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 987.7 hPa. The first pressure value reported by the sonde is 976.1 hPa. The operator transposed the correct surface pressure 978.7 when entering the data. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/27/1996 | 0828 | 09/27/1996 | 0828 |
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Bad surface pressure sounding C1 09/26/96:0828 Date Submitted: 9/27/96 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 09/27/96 Time 08:28 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The surface pressure for this sounding was entered by the operator as 976.1 hPa. Analysis of the raw data file suggests that the actual surface pressure at time of launch was 967.1 hPa. It appears that the operator transposed the correct surface pressure from 967.1 to 976.1 when entering the data. Note that this will affect the altitude calculation throughout the sounding. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
01/10/1997 | 1730 | 01/10/1997 | 1730 |
Subject: | Incorrect surface temperature |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Incorrect surface temperature: sounding C1 01/10/97:1730 Date Submitted: 1/11/97 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member _X_ Other - Site Ops For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 01/10/97 Time 17:30 (GMT) End Date Time (GMT) Data should be labeled: ____ questionable ___ All data fields affected _X__ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The site operator noted that the surface temperature for the subject sounding was entered incorrectly. The value entered was -3.3 degC; the correct value should be -6.3 degC. This is a fairly benign error, only the surface values will be affected. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a0:
sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
03/07/1997 | 1427 | 03/07/1997 | 1427 |
Subject: | Questionable RH |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Questionable RH: sounding C1 03/07/97:1427 Date Submitted: 3/18/97 Submitted By: _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other - Site Ops For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnC1.A1/all What level data: (raw,a0,a1,b1,c1 etc): What location was the data collected at: CF Period of time in question Begin Date 03/07/97 Time 14:27 (GMT) End Date Time (GMT) Data should be labeled: _X__ questionable _?_ All data fields affected _X__ incorrect _X_ Only some data fields affected _?_ wrong calibration ___ others Discussion of Problem: David Cook pointed out that the RH values for the subject sounding disagree substantially with values reported at the 60m tower. Review of the sounding data shows saturation (100%) values reported at the surface and during most of the sounding. The site ops log shows RH values of between 68% (1400) and 52% (1500) at the surface. Surface temperature (8.4) and pressure (983.0) obtained from the sonde are not substantially different from the surface observations (7.8/10.8) and (982.7/982.4) at 1400 and 1500 respectively, so it is unlikely that an incorrect calibration tape was used for the sonde. I think the conclusion must be that the RH sensor on this sonde was bad. As an operational issue, this sonde should have been rejected by site ops because the surface RH value of 100% is more than 7% different than the surface value obtained from an independent reference instrument. I will check the procedures that I have provided to site ops to be sure that I included this criterion. Other observations/measurements impacted by this problem: None Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
05/05/1997 | 1732 | 05/05/1997 | 1732 |
Subject: | Jump in pressure value |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Jump in pressure value C1 sounding 970505.1732 Date Submitted: 5/06/97 Submitted By: Barry Lesht _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnc1/ (alt, asc, press) What level data: (raw,a0,a1,b1,c1 etc): all What location was the data collected at: SGP/CF Period of time in question Begin Date 5/05/97 Time 17:32 (GMT) End Date Time (GMT) Data should be labeled: ___ questionable _X_ All data fields affected _X_ incorrect ___ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: The first pressure value reported by the radiosonde (t = 2 sec) is 974.9. The surface pressure value was 980.9 hPa. This difference is somewhat greater than the expected (normal) change and may mean that either the pressure sensor was jarred during launch or the system mis-identified the actual launch start time. Further clarification requires analysis of the raw data which will take some time. The altitude values for this sounding will be incorrect. The ascent rate values during the first 30 seconds also will be wrong. Because the system will reject samples with out of bound ascent rates (i.e., during the first 30 seconds), the temperature and rh values also will be incorrect (result of interpolation). Relative height values after 30 seconds should be okay. Other observations/measurements impacted by this problem: Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
06/21/1997 | 2027 | 06/21/1997 | 2027 |
Subject: | Incorrect surface values |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | DQR No: Platform: sgpsondeC1 Subject: Incorrect surface values sounding 970621:2027 Date Submitted: 6/23/97 Submitted By: Barry Lesht _X_ Instrument Mentor ___ EST Member ___ Science Team Member ___ Other _____________________________ For questions or problems, please contact the ARM Experiment Center at 509-375-6898 or via email at dqr@arm.gov. Platform/Measurement: sgpsondewrpnc1 What level data: (raw,a0,a1,b1,c1 etc): all What location was the data collected at: SGP/CF Period of time in question Begin Date 6/21/97 Time 20:27 (GMT) End Date Time (GMT) Data should be labeled: ___ questionable ___ All data fields affected _X_ incorrect _X_ Only some data fields affected ___ wrong calibration ___ others Discussion of Problem: Site operations reports that incorrect surface values were entered into the subject sounding. Instead of 972.3, 33.7, and 46 the surface pressure, temperature, and humidity values should have been 971.8, 33.3, and 47. The incorrect surface pressure will result in incorrect altitudes throughout the profile and incorrect ascent rate values during the first 30 seconds. The effects of the incorrect temperature and relative humidty values should be negligable. Other observations/measurements impacted by this problem: Suggested Corrections of the Problem: (e.g. change calibration factor and recompute, flag data with this comment, etc.) Flag data. |
Measurements: | sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
06/22/1997 | 0228 | 06/22/1997 | 0236 |
Subject: | Bad sounding file CF 970622:0228 |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | It appears that there was a problem with the radiosonde that generated this short file. The pressure values are unreasonably high and the file terminated after only 484 seconds of flight. I note that the operators started a new sounding at 0252. This entire file should be disregarded or deleted. |
Measurements: | sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
07/04/1997 | 0525 | 07/04/1997 | 0630 |
Subject: | Bad pressure values CF sounding 970704:0525 |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | The pressure values and hence altitude values are most likely incorrect in this sounding. It also appears that an incorrect surface pressure value was entered by the operator. The surface pressure value in the data (986.8) is somewhat higher than the surface pressures for the neighboring soundings and higher than recorded in the raw data collected before launch (~978 hPa). The first pressure value recorded by the sonde after launch is 884.8 hPa. Analysis of the absolutely raw data reveals that the sonde was reading about 978 hPa well before launch, then suddenly dropped to 886.8 at which it remained stable for several minutes, then began slowly decreasing as would be expected after launch. My best guess is that the sonde was somehow damaged during handling before launch resulting in erroneous pressure values. Relative pressure changes from an 'apparent' surface value of 886.8 hPa may be correct, but the absolute pressure values are not. |
Measurements: | sgpsondewrpnC1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/21/1997 | 0530 | 09/21/1997 | 0530 |
Subject: | Pressure jump at launch |
DataStreams: | sgpsondewrpnC1.a1 |
Description: | The difference between the first pressure value recorded by the radiosonde after launch (984.5) that the surface value entered by the operator (989.3) is somewhat larger than would normally be expected. This will result in incorrect altitude values throughout the sounding. The ascent rates during the first 30 seconds also will be incorrect. |
Measurements: | sgpsondewrpnC1.a1:
|