Measurements: | enarainC1.a1: - Time offset from base_time(time_offset)
- Sensor 1 maximum weight(weight1)
- Sensor 2 maximum weight(weight2)
- Sensor 3 maximum weight(weight3)
- Frequency average, sensor 1(frequency1)
- Voltage minimum(volt_min)
- Frequency average, sensor 2(frequency2)
- time_in_seconds_since_volume_start(time)
- Frequency average, sensor 3(frequency3)
- Sensor status(stat_latch)
- base time in epoch(base_time)
- Time range for the hourly averages, in time offset from midnight(time_bounds)
- lon(lon)
- The latch counter counts number of measurement scans within one minute.(scans_per_min)
- Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
- Total precipitation over one minute sampling period(precip)
- Record with error(error_latch)
- Panel temperature average(ptemp)
- Temperature average, sensor 1(temp1)
- Temperature 3 inside the instrument enclosure(temp3)
- Temperature average, sensor 2(temp2)
- Precipitation intensity(precip_rate)
- -180.0 - +180.0(alt)
- Total maintenance count(maintenance_cnt)
- North Latitude(lat)
- Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
more
enarainC1.00: - (Raw data stream - documentation not supported)
more
enarainC1.b1: - Voltage minimum(volt_min)
- The latch counter counts number of measurement scans within one minute.(scans_per_min)
- Sensor 3 maximum weight(weight3)
- Sensor 1 maximum weight(weight1)
- Sensor 2 maximum weight(weight2)
- Temperature 3 inside the instrument enclosure(temp3)
- Temperature average, sensor 2(temp2)
- Temperature average, sensor 1(temp1)
- Quality check results on field: Weight of accumulated precipitation in the gauge
since the last tare(qc_total_weight) - Frequency average, sensor 2(frequency2)
- Frequency average, sensor 1(frequency1)
- Frequency average, sensor 3(frequency3)
- Sensor status(stat_latch)
- Quality check results on field: Total maintenance count(qc_maintenance_cnt)
- Quality check results on field: Temperature average, sensor 2(qc_temp2)
- Quality check results on field: Temperature average, sensor 3(qc_temp3)
- Quality check results on field: Temperature average, sensor 1(qc_temp1)
- Quality check results on field: Sensor 3 maximum weight(qc_weight3)
- Quality check results on field: Sensor 2 maximum weight(qc_weight2)
- Quality check results on field: Sensor 1 maximum weight(qc_weight1)
- base time in epoch(base_time)
- Quality check results on field: Voltage minimum(qc_volt_min)
- Quality check results on field: Frequency average, sensor 1(qc_frequency1)
- Quality check results on field: Frequency average, sensor 2(qc_frequency2)
- Quality check results on field: Frequency average, sensor 3(qc_frequency3)
- Time offset from base_time(time_offset)
- Precipitation intensity(precip_rate)
- Quality check results on field: Panel temperature average(qc_ptemp)
- Quality check results on field: Precipitation Total(qc_precip)
- Time range for the hourly averages, in time offset from midnight(time_bounds)
- North Latitude(lat)
- Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
- time_in_seconds_since_volume_start(time)
- -180.0 - +180.0(alt)
- Total maintenance count(maintenance_cnt)
- Record with error(error_latch)
- Quality check results on field: Millimeters of precipitation accumulated in the
gauge since the last tare.(qc_total_mm) - Total precipitation over one minute sampling period(precip)
- Panel temperature average(ptemp)
- Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
- Quality check results on field: Precipitation rate(qc_precip_rate)
- lon(lon)
more
enarainwbC1.b1: - Quality check results on field: Sensor 3 maximum weight(qc_weight3)
- Quality check results on field: Sensor 2 maximum weight(qc_weight2)
- Quality check results on field: Sensor 1 maximum weight(qc_weight1)
- -180.0 - +180.0(alt)
- Total precipitation over one minute sampling period(precip)
- time_in_seconds_since_volume_start(time)
- Quality check results on field: Temperature average, sensor 3(qc_temp3)
- Quality check results on field: Temperature average, sensor 1(qc_temp1)
- Quality check results on field: Temperature average, sensor 2(qc_temp2)
- Voltage minimum(volt_min)
- Time offset from base_time(time_offset)
- Quality check results on field: Total maintenance count(qc_maintenance_cnt)
- Quality check results on field: Voltage minimum(qc_volt_min)
- Quality check results on field: Precipitation rate(qc_precip_rate)
- Precipitation intensity(precip_rate)
- Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
- Quality check results on field: Frequency average, sensor 3(qc_frequency3)
- Quality check results on field: Weight of accumulated precipitation in the gauge
since the last tare(qc_total_weight) - Sensor status(stat_latch)
- Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
- Quality check results on field: Precipitation Total(qc_precip)
- Quality check results on field: Panel temperature average(qc_ptemp)
- Quality check results on field: Frequency average, sensor 2(qc_frequency2)
- Quality check results on field: Frequency average, sensor 1(qc_frequency1)
- Sensor 2 maximum weight(weight2)
- Temperature average, sensor 1(temp1)
- Sensor 3 maximum weight(weight3)
- Temperature 3 inside the instrument enclosure(temp3)
- Sensor 1 maximum weight(weight1)
- Temperature average, sensor 2(temp2)
- lon(lon)
- base time in epoch(base_time)
- Panel temperature average(ptemp)
- North Latitude(lat)
- Frequency average, sensor 1(frequency1)
- Frequency average, sensor 2(frequency2)
- Quality check results on field: Millimeters of precipitation accumulated in the
gauge since the last tare.(qc_total_mm) - Frequency average, sensor 3(frequency3)
- Total maintenance count(maintenance_cnt)
- Time range for the hourly averages, in time offset from midnight(time_bounds)
more
enarainwbC1.a1: - Time offset from base_time(time_offset)
- -180.0 - +180.0(alt)
- Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
- North Latitude(lat)
- Panel temperature average(ptemp)
- Total precipitation over one minute sampling period(precip)
- time_in_seconds_since_volume_start(time)
- Record with error(error_latch)
- Voltage minimum(volt_min)
- lon(lon)
- The latch counter counts number of measurement scans within one minute.(scans_per_min)
- Sensor status(stat_latch)
- Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
- Time range for the hourly averages, in time offset from midnight(time_bounds)
- Sensor 3 maximum weight(weight3)
- Sensor 1 maximum weight(weight1)
- Sensor 2 maximum weight(weight2)
- Total maintenance count(maintenance_cnt)
- base time in epoch(base_time)
- Temperature average, sensor 1(temp1)
- Temperature average, sensor 2(temp2)
- Precipitation intensity(precip_rate)
- Temperature 3 inside the instrument enclosure(temp3)
- Frequency average, sensor 2(frequency2)
- Frequency average, sensor 1(frequency1)
- Frequency average, sensor 3(frequency3)
more
enarainwbC1.00: - (Raw data stream - documentation not supported)
more
|