Data Quality Report for Order ID: 187763
User ID: wangm1    Date completed: 2017-09-15
All DQRs
DQR ID Subject Affected Data Streams Data Quality Metric
D141105.2 TMP/KASACR/M1 - Reprocessed and Corrected: Incorrect calibration constant recorded tmpkasacrawrhiM1.a1 Note
D141111.3 TMP/KASACR/M1 - Missing Data tmpkasacrcwrhiM1.a1 Missing
D160830.3 OLI/KASACR/WSACR/M1 - Radar down for testing oliwsacrvpthrcM1.a1 Missing
D160909.16 OLI/KASACR/M1 - Instrument down olikasacrspecvpthrcxpolM1.a0 Missing
 
DQR ID: D141105.2    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2014-01-15 13:00:00 2014-09-13 07:00:00 Note
Subject: TMP/KASACR/M1 - Reprocessed and Corrected: Incorrect calibration constant recorded
Affected Datastreams: tmpkasacrawrhiM1.a1
Description DATA REPROCESSED and CORRECTED: Multiple KASACR datastreams were found to contain incorrect values for calibration constant(s). For moments files, the affected fields are called 'r_calib_radar_constant_h' and 'r_calib_radar_constant_v.' In spectra files, the global attribute 'cal_constant' is incorrect. These values were changed to the correct values. The data was archived in April 2017. Please retrieve the reprocessed data for use in your analysis. You may find these data using the ARM Discovery tool at the following link: http://www.archive.arm.gov/discovery/#v/results/s/finst::kasacr/fsite::tmp/ffac::tmp.M1 ORIGINAL DQR CATEGORY: Red( Incorrect) REPROCESSED and CORRECTED DATA ARCHIVED:2017-04 REPROCESS IDENTIFICATION NUMBER: RID 1258 --------------------------------------------------- --- ORIGINAL DQR DESCRIPTION --- --------------------------------------------------- Files contain incorrect values for calibration constant(s). All other fields are correct, including reflectivities. For moments files, the affected fields are called 'r_calib_radar_constant_h' and 'r_calib_radar_constant_v.' In spectra files, the global attribute 'cal_constant' is incorrect.
Measurements
  • r_calib_radar_constant_h (calibrated_radar_constant_h_channel)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • base_time (Base time in Epoch)
  • r_calib_radar_constant_v (calibrated_radar_constant_v_channel)
 
DQR ID: D141111.3    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2014-02-01 00:00:00 2014-02-07 19:14:15 Missing
2014-08-04 11:30:00 2014-08-07 09:55:02 Missing
2014-08-01 23:00:00 2014-08-03 07:34:30 Missing
2014-03-14 18:00:00 2014-03-21 21:29:09 Missing
2014-03-01 15:00:00 2014-03-03 16:57:30 Missing
2014-06-30 00:00:00 2014-07-03 12:41:19 Missing
2014-06-22 14:00:00 2014-06-27 00:24:26 Missing
2014-03-06 17:20:00 2014-03-08 01:34:17 Missing
Subject: TMP/KASACR/M1 - Missing Data
Affected Datastreams: tmpkasacrcwrhiM1.a1
Description Instrument was down for various reasons throughout the deployment.
Measurements
  • radar_beam_width_v (Radar beam width, vertical channel)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • sweep_mode (Sweep mode)
  • time (time_in_seconds_since_volume_start)
  • mean_doppler_velocity (Mean Doppler velocity)
  • longitude (longitude)
  • platform_type (platform_type)
  • lat (North latitude)
  • fixed_angle (ray_target_fixed_angle)
  • elevation (Elevation angle from horizontal)
  • radar_beam_width_v (half_power_radar_beam_width_v_channel)
  • follow_mode (Follow mode)
  • prt_mode (transmit_pulse_mode)
  • unambiguous_range (Unambiguous range)
  • time (Time in seconds since volume start)
  • primary_axis (Primary axis of rotation)
  • r_calib_pulse_width (Pulse width for this calibration)
  • r_calib_two_way_radome_loss_h (radar_calibration_two_way_radome_loss_h_channel)
  • snr (Signal-to-noise-ratio)
  • frequency (radiation_frequency)
  • azimuth (Azimuth angle from true north)
  • elevation (elevation_angle_from_horizontal_plane)
  • antenna_transition (antenna_is_in_transition_between_sweeps)
  • sweep_end_ray_index (index_of_last_ray_in_sweep)
  • time_coverage_end (Time corresponding to last radial in file)
  • polarization_mode (Polarization mode)
  • range (Range to measurement volume)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • reflectivity (Equivalent reflectivity factor)
  • pulse_width (Pulse width)
  • fixed_angle (Target angle for sweep)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_time (Time of the calibration that applies to each ray)
  • instrument_type (Instrument type)
  • altitude_agl (Altitude above ground level)
  • mean_doppler_velocity (Radial mean Doppler velocity, positive for motion away from the instrument)
  • platform_type (Platform type)
  • spectral_width (Spectral width)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • time_coverage_start (Time corresponding to first radial in file)
  • azimuth (azimuth_angle_from_true_north)
  • sky_noise_copol (Sky noise, copolar)
  • n_samples (Number of samples used to compute moments)
  • r_calib_xmit_power_h (Transmit power)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • base_time (Base time in Epoch)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • r_calib_receiver_gain_hc (calibrated_radar_receiver_gain_v_co_polar_channel)
  • latitude (latitude)
  • prt (Pulse repetition time)
  • altitude (Altitude)
  • instrument_type (type_of_instrument)
  • altitude_agl (altitude_above_ground_level)
  • sky_power_copol (Sky power, copolar)
  • nyquist_velocity (unambiguous_doppler_velocity)
  • polarization_mode (polarization_mode_for_sweep)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • range (range_to_measurement_volume)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • longitude (Longitude)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • volume_number (Volume number)
  • time_coverage_start (data_volume_start_time_utc)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • altitude (altitude)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • prt_mode (PRT mode)
  • sweep_start_ray_index (index_of_first_ray_in_sweep)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • scan_rate (target_scan_rate_for_sweep)
  • sweep_mode (scan_mode_for_sweep)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • r_calib_index (Index for the calibration that applies to each ray)
  • radar_beam_width_h (half_power_radar_beam_width_h_channel)
  • time_offset (Time offset from base_time)
  • r_calib_index (calibration_data_array_index_per_ray)
  • sweep_number (sweep_index_number_0_based)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • prt (pulse_repetition_frequency)
  • pulse_width (transmitter_pulse_width)
  • r_calib_radar_constant_h (calibrated_radar_constant_h_channel)
  • volume_number (data_volume_index_number)
  • sweep_number (Sweep number)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • frequency (Operating frequency)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • alt (Altitude above mean sea level)
  • latitude (Latitude)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • r_calib_radar_constant_v (calibrated_radar_constant_v_channel)
  • spectral_width (Spectrum width)
  • sky_noise_xpol (Sky noise, cross-polar)
  • lon (East longitude)
  • sky_power_xpol (Sky power, cross-polar)
  • time_coverage_end (data_volume_end_time_utc)
 
DQR ID: D160830.3    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-08-30 15:50:00 2016-08-30 16:40:59 Missing
Subject: OLI/KASACR/WSACR/M1 - Radar down for testing
Affected Datastreams: oliwsacrvpthrcM1.a1
Description Radar was brought out of operational scan mode for testing of clutter field
Measurements
  • radar_beam_width_v (Radar beam width, vertical channel)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • sweep_mode (Sweep mode)
  • cross_polar_differential_phase_v (Cross-polar propagation phase shift)
  • time (time_in_seconds_since_volume_start)
  • mean_doppler_velocity (Mean Doppler velocity)
  • longitude (longitude)
  • unthresholded_power_cross_polar_h (Received cross polar power, h channel, without thresholding)
  • platform_type (platform_type)
  • lat (North latitude)
  • fixed_angle (ray_target_fixed_angle)
  • elevation (Elevation angle from horizontal)
  • radar_beam_width_v (half_power_radar_beam_width_v_channel)
  • r_calib_tx_path_loss_v (calibrated_radar_tx_path_loss_v_channel)
  • follow_mode (Follow mode)
  • prt_mode (transmit_pulse_mode)
  • unambiguous_range (Unambiguous range)
  • r_calib_dielectric_constant (calibrated_radar_dielectric_constant_in_use)
  • time (Time in seconds since volume start)
  • primary_axis (Primary axis of rotation)
  • co_to_crosspol_correlation_coeff_h (Copol to cross-polar correlation coefficient (also known as rhoxh))
  • r_calib_pulse_width (Pulse width for this calibration)
  • r_calib_two_way_radome_loss_h (radar_calibration_two_way_radome_loss_h_channel)
  • snr (Signal-to-noise-ratio)
  • unthresholded_power_cross_polar_v (Received cross polar power, v channel, without thresholding)
  • frequency (radiation_frequency)
  • signal_to_noise_ratio_cross_polar_v (Signal-to-noise ratio, Cross-pol for vertical channel)
  • uncorrected_mean_doppler_velocity_v (Radial mean Doppler velocity from vertical channel, positive for motion away from the instrument, uncorrected)
  • azimuth (Azimuth angle from true north)
  • elevation (elevation_angle_from_horizontal_plane)
  • antenna_transition (antenna_is_in_transition_between_sweeps)
  • sweep_end_ray_index (index_of_last_ray_in_sweep)
  • time_coverage_end (Time corresponding to last radial in file)
  • radar_measured_transmit_power (radar_measured_transmit_power)
  • polarization_mode (Polarization mode)
  • range (Range to measurement volume)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • reflectivity (Equivalent reflectivity factor)
  • pulse_width (Pulse width)
  • fixed_angle (Target angle for sweep)
  • unthresholded_power_co_polar_v (Received copolar power, v channel, with thresholding)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_time (Time of the calibration that applies to each ray)
  • differential_reflectivity (Differential reflectivity)
  • instrument_type (Instrument type)
  • altitude_agl (Altitude above ground level)
  • mean_doppler_velocity (Radial mean Doppler velocity, positive for motion away from the instrument)
  • platform_type (Platform type)
  • spectral_width (Spectral width)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • time_coverage_start (Time corresponding to first radial in file)
  • signal_to_noise_ratio_co_polar_v (Signal-to-noise ratio, vertical channel)
  • azimuth (azimuth_angle_from_true_north)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_rx_path_loss_h (calibrated_radar_rx_path_loss_h_channel)
  • n_samples (Number of samples used to compute moments)
  • r_calib_xmit_power_h (Transmit power)
  • co_to_crosspol_correlation_coeff_v (Copol to cross-polar correlation coefficient (also known as rhoxv))
  • nyquist_velocity (Unambiguous Doppler velocity)
  • r_calib_receiver_gain_vc (calibrated_radar_receiver_gain_v_cross_polar_channel)
  • base_time (Base time in Epoch)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • r_calib_receiver_gain_hc (calibrated_radar_receiver_gain_v_co_polar_channel)
  • latitude (latitude)
  • prt (Pulse repetition time)
  • linear_depolarization_ratio_h (Linear depolarization ratio, horizontal channel)
  • altitude (Altitude)
  • group_intra_pulse_prt (Prt between group pulses)
  • instrument_type (type_of_instrument)
  • altitude_agl (altitude_above_ground_level)
  • sky_power_copol (Sky power, copolar)
  • nyquist_velocity (unambiguous_doppler_velocity)
  • unthresholded_power_co_polar_h (Received copolar power, h channel, without thresholding.)
  • signal_to_noise_ratio_cross_polar_h (Signal-to-noise ratio, Cross-pol for horizontal channel)
  • polarization_mode (polarization_mode_for_sweep)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • range (range_to_measurement_volume)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • longitude (Longitude)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • sky_noise_v (Measured sky noise, vertical channel)
  • sky_noise_h (Measured sky noise, horizontal channel)
  • volume_number (Volume number)
  • time_coverage_start (data_volume_start_time_utc)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • uncorrected_mean_doppler_velocity_h (Radial mean Doppler velocity from horizontal channel, positive for motion away from the instrument, uncorrected)
  • altitude (altitude)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • prt_mode (PRT mode)
  • sweep_start_ray_index (index_of_first_ray_in_sweep)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • scan_rate (target_scan_rate_for_sweep)
  • linear_depolarization_ratio_v (Linear depolarization ratio, vertical channel)
  • sweep_mode (scan_mode_for_sweep)
  • r_calib_rx_path_loss_v (calibrated_radar_rx_path_loss_v_channel)
  • copol_correlation_coeff (Copolar correlation coefficient (also known as rhohv))
  • r_calib_index (Index for the calibration that applies to each ray)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • radar_beam_width_h (half_power_radar_beam_width_h_channel)
  • time_offset (Time offset from base_time)
  • r_calib_finite_bandwidth_loss_h (calibrated_radar_finite_bandwidth_loss_h_channel)
  • r_calib_index (calibration_data_array_index_per_ray)
  • sweep_number (sweep_index_number_0_based)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • prt (pulse_repetition_frequency)
  • pulse_width (transmitter_pulse_width)
  • differential_phase (Differential propagation phase shift)
  • r_calib_radar_constant_h (calibrated_radar_constant_h_channel)
  • r_calib_finite_bandwidth_loss_v (radar_calibrated_finite_bandwidth_loss_v_channel)
  • volume_number (data_volume_index_number)
  • sweep_number (Sweep number)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • frequency (Operating frequency)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • r_calib_probert_jones_correction (calibrated_radar_probert_jones_correction_factor)
  • alt (Altitude above mean sea level)
  • latitude (Latitude)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • r_calib_radar_constant_v (calibrated_radar_constant_v_channel)
  • cross_polar_differential_phase_h (Cross-polar propagation phase shift)
  • spectral_width (Spectrum width)
  • r_calib_tx_path_loss_h (calibrated_radar_tx_path_loss_h_channel)
  • signal_to_noise_ratio_co_polar_h (Signal-to-noise ratio, horizontal channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • lon (East longitude)
  • sky_power_xpol (Sky power, cross-polar)
  • time_coverage_end (data_volume_end_time_utc)
 
DQR ID: D160909.16    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-07-28 06:00:00 2016-08-19 21:23:00 Missing
Subject: OLI/KASACR/M1 - Instrument down
Affected Datastreams: olikasacrspecvpthrcxpolM1.a0
Description Instrument was down due to a faulty DSA. No data during this period.
Measurements
  • radar_beam_width_v (Radar beam width, vertical channel)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • sweep_mode (Sweep mode)
  • cross_polar_differential_phase_v (Cross-polar propagation phase shift)
  • time (time_in_seconds_since_volume_start)
  • mean_doppler_velocity (Mean Doppler velocity)
  • longitude (longitude)
  • unthresholded_power_cross_polar_h (Received cross polar power, h channel, without thresholding)
  • platform_type (platform_type)
  • lat (North latitude)
  • fixed_angle (ray_target_fixed_angle)
  • elevation (Elevation angle from horizontal)
  • radar_beam_width_v (half_power_radar_beam_width_v_channel)
  • r_calib_tx_path_loss_v (calibrated_radar_tx_path_loss_v_channel)
  • follow_mode (Follow mode)
  • prt_mode (transmit_pulse_mode)
  • unambiguous_range (Unambiguous range)
  • r_calib_dielectric_constant (calibrated_radar_dielectric_constant_in_use)
  • time (Time in seconds since volume start)
  • primary_axis (Primary axis of rotation)
  • r_calib_pulse_width (Pulse width for this calibration)
  • co_to_crosspol_correlation_coeff_h (Copol to cross-polar correlation coefficient (also known as rhoxh))
  • r_calib_two_way_radome_loss_h (radar_calibration_two_way_radome_loss_h_channel)
  • snr (Signal-to-noise-ratio)
  • unthresholded_power_cross_polar_v (Received cross polar power, v channel, without thresholding)
  • frequency (radiation_frequency)
  • signal_to_noise_ratio_cross_polar_v (Signal-to-noise ratio, Cross-pol for vertical channel)
  • uncorrected_mean_doppler_velocity_v (Radial mean Doppler velocity from vertical channel, positive for motion away from the instrument, uncorrected)
  • azimuth (Azimuth angle from true north)
  • elevation (elevation_angle_from_horizontal_plane)
  • antenna_transition (antenna_is_in_transition_between_sweeps)
  • sweep_end_ray_index (index_of_last_ray_in_sweep)
  • time_coverage_end (Time corresponding to last radial in file)
  • radar_measured_transmit_power (radar_measured_transmit_power)
  • polarization_mode (Polarization mode)
  • range (Range to measurement volume)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • reflectivity (Equivalent reflectivity factor)
  • pulse_width (Pulse width)
  • fixed_angle (Target angle for sweep)
  • unthresholded_power_co_polar_v (Received copolar power, v channel, with thresholding)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_time (Time of the calibration that applies to each ray)
  • differential_reflectivity (Differential reflectivity)
  • instrument_type (Instrument type)
  • altitude_agl (Altitude above ground level)
  • mean_doppler_velocity (Radial mean Doppler velocity, positive for motion away from the instrument)
  • platform_type (Platform type)
  • spectral_width (Spectral width)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • time_coverage_start (Time corresponding to first radial in file)
  • signal_to_noise_ratio_co_polar_v (Signal-to-noise ratio, vertical channel)
  • azimuth (azimuth_angle_from_true_north)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_rx_path_loss_h (calibrated_radar_rx_path_loss_h_channel)
  • n_samples (Number of samples used to compute moments)
  • co_to_crosspol_correlation_coeff_v (Copol to cross-polar correlation coefficient (also known as rhoxv))
  • r_calib_xmit_power_h (Transmit power)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • r_calib_receiver_gain_vc (calibrated_radar_receiver_gain_v_cross_polar_channel)
  • base_time (Base time in Epoch)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • r_calib_receiver_gain_hc (calibrated_radar_receiver_gain_v_co_polar_channel)
  • latitude (latitude)
  • prt (Pulse repetition time)
  • linear_depolarization_ratio_h (Linear depolarization ratio, horizontal channel)
  • altitude (Altitude)
  • group_intra_pulse_prt (Prt between group pulses)
  • instrument_type (type_of_instrument)
  • altitude_agl (altitude_above_ground_level)
  • sky_power_copol (Sky power, copolar)
  • nyquist_velocity (unambiguous_doppler_velocity)
  • unthresholded_power_co_polar_h (Received copolar power, h channel, without thresholding.)
  • signal_to_noise_ratio_cross_polar_h (Signal-to-noise ratio, Cross-pol for horizontal channel)
  • polarization_mode (polarization_mode_for_sweep)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • range (range_to_measurement_volume)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • longitude (Longitude)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • sky_noise_v (Measured sky noise, vertical channel)
  • sky_noise_h (Measured sky noise, horizontal channel)
  • volume_number (Volume number)
  • time_coverage_start (data_volume_start_time_utc)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • uncorrected_mean_doppler_velocity_h (Radial mean Doppler velocity from horizontal channel, positive for motion away from the instrument, uncorrected)
  • altitude (altitude)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • prt_mode (PRT mode)
  • sweep_start_ray_index (index_of_first_ray_in_sweep)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • scan_rate (target_scan_rate_for_sweep)
  • sweep_mode (scan_mode_for_sweep)
  • linear_depolarization_ratio_v (Linear depolarization ratio, vertical channel)
  • r_calib_rx_path_loss_v (calibrated_radar_rx_path_loss_v_channel)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • r_calib_index (Index for the calibration that applies to each ray)
  • copol_correlation_coeff (Copolar correlation coefficient (also known as rhohv))
  • radar_beam_width_h (half_power_radar_beam_width_h_channel)
  • time_offset (Time offset from base_time)
  • r_calib_finite_bandwidth_loss_h (calibrated_radar_finite_bandwidth_loss_h_channel)
  • r_calib_index (calibration_data_array_index_per_ray)
  • sweep_number (sweep_index_number_0_based)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • prt (pulse_repetition_frequency)
  • differential_phase (Differential propagation phase shift)
  • pulse_width (transmitter_pulse_width)
  • r_calib_radar_constant_h (calibrated_radar_constant_h_channel)
  • r_calib_finite_bandwidth_loss_v (radar_calibrated_finite_bandwidth_loss_v_channel)
  • volume_number (data_volume_index_number)
  • sweep_number (Sweep number)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • frequency (Operating frequency)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • r_calib_probert_jones_correction (calibrated_radar_probert_jones_correction_factor)
  • alt (Altitude above mean sea level)
  • latitude (Latitude)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • r_calib_radar_constant_v (calibrated_radar_constant_v_channel)
  • cross_polar_differential_phase_h (Cross-polar propagation phase shift)
  • spectral_width (Spectrum width)
  • r_calib_tx_path_loss_h (calibrated_radar_tx_path_loss_h_channel)
  • signal_to_noise_ratio_co_polar_h (Signal-to-noise ratio, horizontal channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • lon (East longitude)
  • sky_power_xpol (Sky power, cross-polar)
  • time_coverage_end (data_volume_end_time_utc)