Subject: | ENA/AOS/C1 - Instrument mentors working at the site |
DataStreams: | enaaosozoneC1.a1, enaaoscoC1.b1, enaaosmetC1.a1, enaaoscoC1.a1
|
Description: | Instrument mentors working at the site. Sample lines and electrical connections being
reconfigured. Instruments that had no work done on them may still be affected. |
Measurements: | enaaosozoneC1.a1: - Ozone pressure(ozone_pressure)
- ozone_bench_temp
- Ozone concentration(ozone)
enaaosmetC1.a1: - Ambient pressure(P_Ambient)
- Wind direction, relative to true North(WindDirection)
- Ambient air temperature(T_Ambient)
- Rain amount(rain_amount)
- supply_volts
- heater_temp
- Rain Duration(rain_duration)
- Ambient air relative humidity(RH_Ambient)
- Rain intensity(rain_intensity)
- heater_volts
- Wind speed(WindSpeed)
- ref_volts
enaaoscoC1.a1: - mass_flow_through_MFC_2
- Nitrous oxide (N2O) mixing ratio corrected for water vapor concentration and
calculated with nominal sensitivity correction(n2o_dry) - mass_flow_through_MFC_1
- gas_temperature
- Carbon monoxide (CO) mixing ratio corrected for water vapor concentration and
calculated with nominal sensitivity correction(co_dry) - gas_pressure
- ambient_temperature
- set_point_for_MFC_1
- Calculated CO concentration(co)
- N2O mole fraction of during batch measurement(n2o)
- set_point_for_MFC_2
- valve_position_MFC_2
- valve_position_MFC_1
- Water vapor mixing ratio calculated with nominal sensitivity correction(h2o)
enaaoscoC1.b1: - Carbon monoxide (CO) mixing ratio corrected for water vapor concentration and
calculated with nominal sensitivity correction(co_dry) - ambient_temperature
- set_point_for_MFC_1
- set_point_for_MFC_2
- gas_pressure
- Calculated CO concentration(co)
- gas_temperature
- N2O mole fraction of during batch measurement(n2o)
- valve_position_MFC_2
- Water vapor mixing ratio calculated with nominal sensitivity correction(h2o)
- valve_position_MFC_1
- mass_flow_through_MFC_2
- mass_flow_through_MFC_1
- Nitrous oxide (N2O) mixing ratio corrected for water vapor concentration and
calculated with nominal sensitivity correction(n2o_dry) - seconds_after_calibration
|