Data Quality Reports for Session: 181716 User: eom2 Completed: 11/24/2016

TABLE OF CONTENTS

DQR IDSubjectData Streams Affected Data Quality Metric
D120228.9TWP/MPLCMASK/C3 - Reprocess: Backscatter signals not set to missing when beam blockedtwp30smplcmask1zwangC3.c1Suspect
D140616.1TWP/MPLCMASK/C1/C2/C3 - Reprocessing Notice (RID 1148)twp30smplcmask1zwangC3.c1Does not affect quality


DQRID : D120228.9
Start DateStart TimeEnd DateEnd Time Data Quality Metric
08/08/2002000001/06/20152159Suspect
Subject:
TWP/MPLCMASK/C3 - Reprocess: Backscatter signals not set to missing when beam blocked
DataStreams:twp30smplcmask1zwangC3.c1
Description:
The backscatter signals are flagged as missing when the beam is blocked.  For the 
historical data, this functionality was not implemented (when the VAP uses MPL as input).	This 
flag is not very reliable since it is based on the signal strength during the beam blocked 
conditions.
Measurements:twp30smplcmask1zwangC3.c1:
  • Backscatter, ceilometer, range and sensitivity corrected(backscatter)

Back To Table of Contents

DQRID : D140616.1
Start DateStart TimeEnd DateEnd Time Data Quality Metric
08/31/2006000006/06/20142359Does not affect quality
Subject:
TWP/MPLCMASK/C1/C2/C3 - Reprocessing Notice (RID 1148)
DataStreams:twp30smplcmask1zwangC3.c1
Description:
See below for details of reprocessing that was completed on 20140822.  Original DQR 
category: 4 (Red, Incorrect ).

-----------------------------------------------------------

The Linear depolarization ratio calculation in the VAP is incorrect.
Measurements:twp30smplcmask1zwangC3.c1:
  • linear_depol_ratio

Back To Table of Contents


END OF DATA