Data Quality Reports for Session: 181022 User: zhangz2 Completed: 11/03/2016


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected Data Quality Metric
D160622.3ASI/MWR/M1 - Uncertain calibration-RECALIBRATEasimwrlosM1.b1Suspect
D160722.3ASI/MPL/M1 - instrumentasimplpolfsM1.b1Missing
D160914.1ASI/CEIL/M1 - data communicationasiceilM1.b1Suspect
D161031.12ASI/MPL/M1 - Instrument, ProcessingasimplpolfsM1.b1Does not affect quality
D161031.13ASI/KASACR/M1 - Incorrect velocity signasikasacrppiM1.a1, asikasacrblrhiM1.a1, asikasacrvptM1.a1Incorrect


DQRID : D160622.3
Start DateStart TimeEnd DateEnd Time Data Quality Metric
05/21/2016162406/08/20162100Suspect
Subject:
ASI/MWR/M1 - Uncertain calibration-RECALIBRATE
DataStreams:asimwrlosM1.b1
Description:
There may be a slight obstruction on the radiometer FOV while scanning. The scanning 
angles were changed.
Measurements:asimwrlosM1.b1:
  • Water, liquid, total along line-of-sight path(liq)
  • tnd23
  • 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Total water vapor along LOS path(vap)
  • tnd31
  • tnd_nom31
  • tnd_nom23


Back To Table of Contents

DQRID : D160722.3
Start DateStart TimeEnd DateEnd Time Data Quality Metric
06/01/2016000007/02/20161305Missing
Subject:
ASI/MPL/M1 - instrument
DataStreams:asimplpolfsM1.b1
Description:
Later than planned deployment of the instrument.
Measurements:asimplpolfsM1.b1:
  • scope_temp
  • Preliminary cloud base height(preliminary_cbh)
  • East longitude(lon)
  • qc_scope_temp
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • num_bins
  • range_bins
  • Attenuated backscatter, cross pol(signal_return_cross_pol)
  • qc_preliminary_cbh
  • polarization_control_voltage
  • Altitude above mean sea level(alt)
  • background_signal_cross_pol
  • Attenuated backscatter, copol(signal_return_co_pol)
  • range_bin_time
  • num_channels
  • energy_monitor
  • North latitude(lat)
  • qc_laser_temp
  • range_bin_width
  • laser_temp
  • background_signal_co_pol
  • qc_detector_temp
  • range_offset
  • polarization_control
  • deadtime_correction
  • time
  • shots_per_avg
  • background_signal_std_co_pol
  • qc_time
  • overlap_correction_heights
  • dead_time_corrected
  • deadtime_correction_counts
  • qc_energy_monitor
  • max_altitude
  • laser_fire_bin
  • background_signal_std_cross_pol
  • overlap_correction
  • detector_temp
  • qc_signal_return_co_pol
  • range
  • pulse_rep
  • qc_signal_return_cross_pol
  • base_time
  • mcs_mode
  • first_data_bin
  • time_offset
  • qc_range_offset


Back To Table of Contents

DQRID : D160914.1
Start DateStart TimeEnd DateEnd Time Data Quality Metric
07/12/2016200008/14/20160459Suspect
Subject:
ASI/CEIL/M1 - data communication
DataStreams:asiceilM1.b1
Description:
The data were intermittent, especially on 7/19/2016, due to poor serial communication. The 
cable was repaired on 7/21 and the serial device server and instrument were power-cycled 
on 7/28.
Measurements:asiceilM1.b1:
  • alt_highest_signal
  • range_bounds
  • tilt_angle
  • Third cloud base height(third_cbh)
  • measurement_parameters
  • range
  • window_transmission
  • status_flag
  • sum_backscatter
  • Cloud, base height, lowest base sensed(first_cbh)
  • laser_temperature
  • Backscatter, ceilometer, range and sensitivity corrected(backscatter)
  • background_light
  • laser_pulse_energy
  • Cloud, base height, second lowest base sensed(second_cbh)
  • vertical_visibility
  • status_string
  • detection_status


Back To Table of Contents

DQRID : D161031.12
Start DateStart TimeEnd DateEnd Time Data Quality Metric
10/06/2016203610/11/20162137Does not affect quality
Subject:
ASI/MPL/M1 - Instrument, Processing
DataStreams:asimplpolfsM1.b1
Description:
To understand what was causing frequent spikes in the MPL energy levels, the averaging 
time was increased to 30s. This was reverted back to the original 10s averaging time at the 
end of the DQR period.
Measurements:asimplpolfsM1.b1:
  • scope_temp
  • Preliminary cloud base height(preliminary_cbh)
  • East longitude(lon)
  • qc_scope_temp
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • num_bins
  • range_bins
  • Attenuated backscatter, cross pol(signal_return_cross_pol)
  • qc_preliminary_cbh
  • polarization_control_voltage
  • Altitude above mean sea level(alt)
  • background_signal_cross_pol
  • Attenuated backscatter, copol(signal_return_co_pol)
  • range_bin_time
  • num_channels
  • energy_monitor
  • North latitude(lat)
  • qc_laser_temp
  • range_bin_width
  • laser_temp
  • background_signal_co_pol
  • qc_detector_temp
  • range_offset
  • polarization_control
  • deadtime_correction
  • time
  • shots_per_avg
  • background_signal_std_co_pol
  • qc_time
  • overlap_correction_heights
  • dead_time_corrected
  • deadtime_correction_counts
  • qc_energy_monitor
  • max_altitude
  • laser_fire_bin
  • background_signal_std_cross_pol
  • overlap_correction
  • detector_temp
  • qc_signal_return_co_pol
  • range
  • pulse_rep
  • qc_signal_return_cross_pol
  • base_time
  • mcs_mode
  • first_data_bin
  • time_offset
  • qc_range_offset


Back To Table of Contents

DQRID : D161031.13
Start DateStart TimeEnd DateEnd Time Data Quality Metric
07/20/2016225910/31/20160000Incorrect
Subject:
ASI/KASACR/M1 - Incorrect velocity sign
DataStreams:asikasacrppiM1.a1, asikasacrblrhiM1.a1, asikasacrvptM1.a1
Description:
The mean Doppler velocity has the incorrect sign.
Measurements:asikasacrppiM1.a1:
  • Mean Doppler Velocity(mean_doppler_velocity)

asikasacrvptM1.a1:
  • Mean Doppler Velocity(mean_doppler_velocity)

asikasacrblrhiM1.a1:
  • Mean Doppler Velocity(mean_doppler_velocity)


Back To Table of Contents



END OF DATA