ENA/MWR3C/C1 - Incorrect surface relative humidity

The surface relative humidity readings are incorrect and should be disregarded

• surface_relative_humidity

ENA/SONDE/C1 - Reprocessing Notice (RID 1402)

DATA REPROCESSED.  Data was reprocessed on 20160224 to fix issues noted in the original 
DQR copied below.

--------------------------------------------------------------------------

For unknown reasons, the longitude set in the BBSS DigiCORA was reported incorrectly as 
28.03, when the correct value is actually -28.03.

• East longitude(lon)

ENA/DL/C1 - Instrument removed for hurricane

The instrument was taken offline and stored indoors to avoid potential damage during a 
hurricane passage.

• North latitude(lat)
• intensity
• base_time
• Altitude above mean sea level(alt)
• azimuth
• time
• Attenuated backscatter(attenuated_backscatter)
• Radial velocity(radial_velocity)
• range
• East longitude(lon)
• elevation
• time_offset

ENA/C1 - Reprocess: Slightly incorrect location fields

Some of the instruments are being processed with the previous "GRW-Azores" lat/lon/alt 
instead of the new "ENA-Azores" lat/lon/alt. The differences are minor, but will be 
corrected. The respective GRW and ENA lat, lon, and alt values are as follows:
 
GRW  lat = 39.0911 ;
ENA lat = 39.0916 ;
GRW  lon = -28.0297 ;
ENA  lon = -28.0257 ;
GRW  alt = 26 ;
ENA  alt = 30.48 ;

• North latitude(lat)
• Altitude above mean sea level(alt)
• East longitude(lon)

• North latitude(lat)
• Altitude above mean sea level(alt)
• East longitude(lon)

• Altitude above mean sea level(alt)
• North latitude(lat)
• East longitude(lon)

• East longitude(lon)
• Altitude above mean sea level(alt)
• North latitude(lat)

ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number

The instrument serial number that appears in the netcdf files global attributes is 
incorrect. The correct serial number is 0514-84.

• base_time