MCQ/SKYRAD/S1 - IRT not installed

An IRT was not installed so the datalogger sampled a floating signal.

• Temperature, Sky Infra-Red(sky_ir_temp)
• sky_ir_temp_max
• sky_ir_temp_std
• sky_ir_temp_min

• inst_sky_ir_signal

SGP/MWR3C/E32 - Incorrect data

The instrument had incorrect receiver parameters.

• Liquid water path best-estimate value, hourly mean(lwp)
• 89.0 GHz sky brightness temperature(tbsky89)
• Column precip water vapor(pwv)

SGP/MWR3C/E32 - Missing data

Data are missing

• hail_duration
• surface_pressure
• qc_surface_temperature
• qc_surface_relative_humidity
• qc_wind_direction_avg
• qc_wind_direction_max
• qc_wind_direction_min
• 30.0 GHz sky brightness temperature(tbsky30)
• rain_accumulation
• Column precip water vapor(pwv)
• qc_hail_intensity
• wind_direction_min
• wind_direction_max
• rain_peak_intensity
• lwp_err
• qc_tbsky89
• azimuth
• elevation
• hail_intensity
• 23.8 GHz sky brightness temperature(tbsky23)
• wind_speed_max
• qc_time
• qc_rain_duration
• qc_hail_accumulation
• 89.0 GHz sky brightness temperature(tbsky89)
• qc_wind_speed_min
• time
• qc_wind_speed_max
• qc_rain_peak_intensity
• qc_azimuth
• qc_surface_pressure
• qc_infrared_temperature
• infrared_temperature
• Liquid water path best-estimate value, hourly mean(lwp)
• qc_hail_duration
• pwv_err
• wind_direction_avg
• base_time
• Rain Intensity(rain_intensity)
• qc_elevation
• North latitude(lat)
• wind_speed_min
• Altitude above mean sea level(alt)
• qc_wind_speed_avg
• qc_tbsky23
• qc_rain_intensity
• wind_speed_avg
• surface_relative_humidity
• hail_accumulation
• qc_rain_accumulation
• time_offset
• surface_temperature
• East longitude(lon)
• qc_tbsky30
• Rain Duration(rain_duration)

ASI/SONDE/S1 - Reprocess: Incorrect lat and lon

Somehow the initial Lat/Lon settings were corrupted.  Data has been reprocessed and needs 
to be collected and ingested.

• Raw data stream - documentation not supported

SGP/MFRSR/E41 - Heater board failure

The heater board failed completely.  It was replaced on 20160630 and doing so resolved the 
problem.

• Raw data stream - documentation not supported

SGP/EBBR/E11 - Soil Temperature 1 Spiking

Soil temperature 1 spiked at times, the result of loose lead connections.

This did not have a significant effect on the calculation of sensible and latent heat 
fluxes.

• energy_storage_change_1
• Soil temperature mean 1(soil_temp_1)

AWR/RWP/M1 - Data collection

Instrument computer was put on stand by since it had reached 90% storage capacity. 
Therefore, data is missing/was not recorded during the DQPR period.

• pulse_width
• num_time_domain_integrations
• first_gate_height
• time
• beam_azimuth
• num_fft_points
• East longitude(lon)
• interpulse_period
• base_time
• gate_interval
• beam_zenith
• num_frequency_domain_integrations
• time_offset
• Altitude above mean sea level(alt)
• Spectrum of raw counts from spectrometer(spectra)
• North latitude(lat)
• mode_number
• beam_number
• noise_threshold
• fft_frequency_spacing
• first_reported_spectra_bin

• first_reported_spectra_bin
• beam_number
• gate_interval
• fft_frequency_spacing
• num_frequency_domain_integrations
• pulse_width
• first_gate_height
• noise_threshold
• num_fft_points
• time
• mode_number
• base_time
• time_offset
• East longitude(lon)
• Altitude above mean sea level(alt)
• North latitude(lat)
• interpulse_period
• beam_azimuth
• num_time_domain_integrations
• Spectrum of raw counts from spectrometer(spectra)
• beam_zenith

• North latitude(lat)
• first_gate_height
• base_time
• beam_number
• Spectrum of raw counts from spectrometer(spectra)
• mode_number
• beam_azimuth
• Altitude above mean sea level(alt)
• time_offset
• beam_zenith
• fft_frequency_spacing
• num_frequency_domain_integrations
• pulse_width
• East longitude(lon)
• noise_threshold
• first_reported_spectra_bin
• gate_interval
• interpulse_period
• time
• num_fft_points
• num_time_domain_integrations

• beam_zenith
• time
• base_time
• interpulse_period
• num_frequency_domain_integrations
• noise_threshold
• first_gate_height
• beam_azimuth
• North latitude(lat)
• num_fft_points
• fft_frequency_spacing
• time_offset
• first_reported_spectra_bin
• Spectrum of raw counts from spectrometer(spectra)
• beam_number
• East longitude(lon)
• mode_number
• gate_interval
• num_time_domain_integrations
• pulse_width
• Altitude above mean sea level(alt)

OLI/AOSMET/M1 - Reprocess: Wind direction incorrect

The wind sensor was not aligned to true north during this time. It was aligned 59 degrees 
west of north.

• Wind direction, relative to true North(WindDirection)

SGP/EBBR/E11 - Sensible and Latent Heat Fluxes Incorrect

Soil temperature 1 and soil moisture 1 were incorrect, resulting in the sensible and 
latent heat fluxes being incorrect.

• Latent heat flux(latent_heat_flux)
• Average soil heat flow at the surface(surface_soil_heat_flux_avg)
• Sensible heat flux(sensible_heat_flux)
• energy_storage_change_1
• Soil temperature mean 1(soil_temp_1)
• surface_soil_heat_flux_1
• soil_moisture_1

SGP/EBBR/E11 - Soil temperature 2 Spiking

Sensible and latent heat flux was not deleteriously affected when small spikes
occurred in soil temperature 2.

• Soil temperature mean 2(soil_temp_2)
• energy_storage_change_2

OLI/UHSAS/M1 - High counts below 100 nm

High counts below 100 nm. Most likely some debris stuck to the jet nozzle. No valid data.

• lower_size_limit
• MET air temperature(temperature)
• upper_size_limit
• flow
• current
• sample_pressure
• sampling_volume
• unit_temperature
• Particle size distribution, limited by lower_size_limit and upper_size_limit(size_distribution)
• bin_num
• purge_flow
• reference
• auxiliary
• differential_voltage
• sheath_flow
• scattering_voltage

ASI/SMPS/M1 - Instrument maintence

During these time periods, a HEPA filter was connected to different portions of the system 
for investigation of leaks.

• Sample relative humidity(sample_rh)
• Sample temperature(sample_temperature)