| Description: | Backscatter image is indicating some strange artifact at 3-5 km with higher than expected
returns. The ship is currently at sea, so I am not able to look at the data directly. The
only indication of the issue is with this comparison plot.
Rich, what do you think. Could a reboot help with this issue? |
| Measurements: | magmplpolfsM1.b1: - qc_detector_temp
- qc_signal_return_cross_pol
- range
- alt
- polarization_control_voltage
- lat
- background_signal_cross_pol
- background_signal_co_pol
- qc_range_offset
- overlap_correction
- dead_time_corrected
- scope_temp
- Attenuated backscatter, copol(signal_return_co_pol)
- energy_monitor
- num_bins
- qc_time
- range_bin_width
- overlap_correction_heights
- time
- deadtime_correction
- Attenuated backscatter, cross pol(signal_return_cross_pol)
- range_bin_time
- qc_laser_temp
- max_altitude
- background_signal_std_cross_pol
- pulse_rep
- qc_preliminary_cbh
- base_time
- laser_temp
- polarization_control
- detector_temp
- time_offset
- qc_energy_monitor
- lon
- qc_scope_temp
- Preliminary cloud base height(preliminary_cbh)
- qc_signal_return_co_pol
- mcs_mode
- Pressure, associated geometric height, at altitude, NGM model output(height)
- first_data_bin
- background_signal_std_co_pol
- deadtime_correction_counts
- num_channels
- range_bins
- range_offset
|