PVC/MET/M1 - Tower lowered

Met tower was lowered during this time. Data may be inaccurate.

• wind_dir_sd
• wind_spd_arith_max
• wind_spd_arith_min
• Barometric Pressure(atmos_pressure)
• relh_sd
• Vapor pressure mean(vappress_mean)
• Wind speed, lower, 1-min avg(wind_spd_arith_avg)
• wind_spd_arith_sd
• Mean Air Temperature or Hardware Error(temp_mean)
• temp_sd
• Relative humidity mean(relh_mean)
• Vector-averaged Wind Speed(wind_spd_vec_avg)
• Vector-averaged Wind Direction(wind_dir_vec_avg)
• vappress_sd

PVC/MET/M1 - False positive precipitation

Optical rain gauge recorded significantly more precipitation than expected. Instrument was 
removed/replaced and sent for recalibration.

• org_carrier_mean
• Rain, surface, 1-min avg(precip_rate_mean)
• precip_rate_min
• precip_rate_sd
• precip_rate_max

PVC/MET/M1 - Tower lowered

The tower containing the wind sensor was not at full-height of 10 meters following 
Hurricane Sandy.

• wind_spd_arith_max
• wind_dir_sd
• wind_spd_arith_min
• Vector-averaged Wind Speed(wind_spd_vec_avg)
• Vector-averaged Wind Direction(wind_dir_vec_avg)
• wind_spd_arith_sd
• Wind speed, lower, 1-min avg(wind_spd_arith_avg)

PVC/MET/M1 - PWD data intermittently missing

Present weather detector was occasionally reporting a hardware problem during this time. 
The reported error did not affect visibility readings, but caused all other data to report 
as missing. Error resolved its self with no indication of the problem cause.

• pwd_cumul_snow
• pwd_pw_code_1_hr
• pwd_avg_H2O_int_1_min
• pwd_pw_code_inst
• pwd_pw_code_15_min
• pwd_cumul_water

PVC/MET/M1 - PWD failure

Lens and rain sensor in present weather detector failed. Data during this time are suspect 
or missing.

• pwd_cumul_snow
• pwd_pw_code_1_hr
• Average 10 min visibility(pwd_avg_vis_10_min)
• pwd_avg_H2O_int_1_min
• pwd_pw_code_inst
• pwd_pw_code_15_min
• pwd_cumul_water
• Average 1 min visibility(pwd_avg_vis_1_min)

PVC/MET/M1 - T/RH sensor failure

Temperature, relative humidity, and vapor pressure data are incorrect due to a failed 
sensor. Sensor replacement corrected the problem.

• Relative humidity mean(relh_mean)
• vappress_sd
• relh_sd
• Vapor pressure mean(vappress_mean)
• temp_sd
• Mean Air Temperature or Hardware Error(temp_mean)

PVC/MET/M1 - Questionable humidity

A reference check of the humidity sensor showed that the instrument may have been reading 
as much as 20% high.

• Relative humidity mean(relh_mean)
• vappress_sd
• relh_sd
• Vapor pressure mean(vappress_mean)