| DQR ID | Subject | Data Streams Affected |
|---|---|---|
| D040526.2 | SGP/AERI/C1 - Metadata errors | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1 |
| D960701.3 | Obstruction in the AERI-01 Enclosure | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1 |
| D960715.1 | Dust on the Scene Mirror | sgpaeri01ch1C1.a1 |
| D960715.2 | Dust on the Scene Mirror | sgpaeri01ch1C1.a1 |
| D970627.1 | Software update on the AERI | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1 |
| D980414.1 | AERI data effected by failing detector cooler | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| D980414.2 | Tumbleweed in AERI Field of View | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| D980414.3 | CO2 Suppression of AERI Spectra | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| D990920.1 | SGP/AERI/C1 - Reprocessed: radiance data | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01summaryC1.a1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaeriprofC1.c1, sgplblch1C1.c1, sgplblch1lsC1.c1, sgplblch2C1.c1, sgplblch2lsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1, sgpaeri01C1.00 |
| D991123.1 | SGP/AERI - AERI01 scene mirror motor failure | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilbldiffC1.c1, sgpaeriprofC1.c1, sgplblch1C1.c1, sgplblch1lsC1.c1, sgplblch2C1.c1, sgplblch2lsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaeriprofC1.c1, sgpgaeriprofC1.c1, sgpaeri01C1.00 |
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 07/22/1995 | 0012 | 05/14/2003 | 2359 |
| Subject: | SGP/AERI/C1 - Metadata errors |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1 |
| Description: | The latitude, longitude and altitude of the AERI were incorrectly entered into the ARM database. The correct location of the SGP.C1 AERI is: Lat: 36.606N Lon: 97.485W Alt: 316m |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerilbldifflsC1.c1:
sgpaeri01summaryC1.a1:
sgpaerilblcloudsC1.c1:
sgpaeri01engineerC1.a1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgpqmeaerimeansC1.c1:
sgpqmeaerilblC1.c1:
sgpqmeaerilbllsC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 05/21/1996 | 2200 | 06/13/1996 | 2200 |
| Subject: | Obstruction in the AERI-01 Enclosure |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1 |
| Description: | DQR No:
Subject: Obstruction in the AERI-01 Enclosure
Date Submitted:
Submitted By: Robert Knuteson
___ Instrument Mentor
___ EST Member
_X_ Science Team Member
___ Other _____________________________
Organization: University of Wisconsin - Madison
Email address: robert.knuteson@ssec.wisc.edu
Telephone: 608-263-7974
Platform/Measurement:
What level data: (raw,a0,a1,b1,c1 etc): All levels
What location was the data collected at: ARM SGP CF
Period of time in question
Begin Date May/ 21/ 1996 Time 22:00 (GMT)
End Date June/ 13/ 1996 Time 22:00 (GMT)
Data should be labeled:
___ questionable
_X_ incorrect
___ wrong calibration
___ others _______________________________
Discussion of Problem:
The AERI Profile QME (Wayne Feltz) first detected a problem with AERI-01 data
from the SGP CF. Investigation by site personnel on June 14, found numerous
bird droppings in the area around the AERI-01 sky hatch plus some grass lying
across a portion of the hatch opening. Using the AERI-LBLRTM QME to analyse
the data after the fact it appears likely that nesting birds placed pieces of
grass in a position to obstruct the AERI field of view to the sky. By some
quirk of fate, the problem actually fixed itself about 12 hours before the
site personnel made their inspection of the AERI viewport and discovered the
evidence described above. The system has been operating normally since June
13, 1996 22:00 UTC as confirmed by a recent analysis of the AERI-LBLRTM QME
results.
Other observations/measurements impacted by this problem:
This effects all QMEs and other analyses that use the AERI-01 data.
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
It is unlikely that this data can or will be corrected.
REQUIRED ACTIONS:
This report is informational no further action required____X_____
Experiment Center action required as follows:
None
Site Operations action required as follows:
None
Archive action required as follows:
None |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerilbldifflsC1.c1:
sgpaerilblcloudsC1.c1:
sgpaeri01summaryC1.a1:
sgpaeri01engineerC1.a1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 09/01/1995 | 0000 | 12/22/1995 | 0000 |
| Subject: | Dust on the Scene Mirror |
| DataStreams: | sgpaeri01ch1C1.a1 |
| Description: | DQR No:
Subject: Dust on the AERI-01 Scene Mirror
Date Submitted:
Submitted By: Robert Knuteson
___ Instrument Mentor
___ EST Member
_X_ Science Team Member
___ Other _____________________________
Organization: University of Wisconsin - Madison
Email address: robert.knuteson@ssec.wisc.edu
Telephone: 608-263-7974
Platform/Measurement:
What level data: (raw,a0,a1,b1,c1 etc):
All levels including the following platforms:
sgpaeri01ch1C1.a1
sgpaeri01ch2C1.a1
sgpaeri01summaryC1.a1
sgpaeri01engineerC1.a1
What location was the data collected at: ARM SGP CF
Period(s) of time in question
Period 1: Begin Date Sep/ 1/ 1995 Time 00:00 (GMT)
End Date Dec/ 22/ 1995 Time 00:00 (GMT)
Period 2: Begin Date Jan/ 18/ 1996 Time 00:00 (GMT)
End Date Apr/ 9/ 1996 Time 00:00 (GMT)
Data should be labeled:
_X_ questionable
___ incorrect
___ wrong calibration
___ others _______________________________
Discussion of Problem:
On April 25, 1995 the AERI-01 was installed in an enclosure protruding out
the side of the optical trailer at the ARM SGP central facility. This
configuration was a change from the AERI prototype setup which used
a roof hatch and a "chimney". The reason for the new configuration was
to place the AERI front end (scene mirrors and blackbodies) in an
environment that was much closer in temperature to the outside ambient air.
In that regard the change has been very successful. Unfortunately this
configuration also exposes the AERI scene mirror to contamination by airborne
dust.
At the time of installation only a rough opening to the sky existed with a
wooden hatch that was manually removed and replaced by site personnel during
normal working hours. Most of the time the hatch remained closed. When the
automatic hatch for the AERI-01 system in the ARM SGP CF optical trailer
was installed in July 1995, the percentage of time which the hatch was open
increased dramatically. Since that time there has been
a slow accumulation of dust on the AERI-01 scene mirror. No routine
maintenance (such as mirror cleaning) was defined since this dust
was thought to be only a thoughput problem but not a calibration issue.
However, analysis of the AERI/LBLRTM QME (comparison of observed radiances
to model calculations) indicated that there was a problem with the
AERI-01 observations during the October 1995 ARESE IOP. On Dec 20, 1995
personnel from UW-Madison visited the site and determined that the dust
on the scene mirror was acting as a scattering surface which effectively
broadened the conical field of view to the blackbodies and the sky. This
"broadening" of the field of view would not have lead to a problem except
for the fact that hatch opening is too small at it's current distance from
the instrument to allow the full beam to exit the enclosure. Thus a
fraction of the AERI field of view (the "tail" of the field) was viewing
the ambient temperature area surrounding the hatch opening. This caused
a mixture of ambient temperature emission into the scene, a fact that
is readily apparent when the scene was of a clear, dry sky (such as in the
ARESE IOP).
Period 1 indicated above covers the period from the first of September 1995
when this effect began to be noticeable to December 22, 1995 after the
scene mirror had been cleaned of dust contamination by UW-Madison personnel.
In general the scattering effect is increasing with time as more and more
dust accumulates on the scene mirror, but does show "events" linked to times
when the automatic hatch does not close soon enough and rain drops
fall on the scene mirror. These rain drops seem have the effect of both
making the scattering surfaces more effective (thus worse) and at other
times of actually partially cleaning the mirror if the rain is heavy enough.
Period 2, unfortunately only 4 weeks later, began with a different type
of "event" but leading to the same effect. On Jan 18, 1996 a major winter
storm caused snow to accumulate on the AERI-01 scene mirror (another
example when the automatic hatch did not work properly). When the snow
melted it appears to have left a substantial residue on the scene mirror
leading to an abrupt increase in the scattered energy contribution as
described above. This "dirty" mirror condition persisted until UW-Madison
personnel replaced the scene mirror on April 8, 1996.
Since April 1996, the AERI-01 system has been operating in the previous
manner; thus one can expect that the scene mirror has been accumulating dust
up to the present time. To address this recurring problem, UW-Madison is
developing a procedure that would allow the AERI-01 scene mirror to be
cleaned by site personnel on a regular basis. In addition, automatic
diagnostic information has been developed to identify this problem
immediately and provide feedback to site (and post analysis) personnel.
Furthermore, modifications of the AERI enclosure design are under
investigation that should build in an immunity to this effect at all
future AERI installations.
Other observations/measurements impacted by this problem:
This affects QMEs and other analyses that use the AERI-01 data that
require absolute accuracy better than about 5%.
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
It is likely that this data can and will be corrected. The best
approach to use in the correction is currently under investigation.
REQUIRED ACTIONS:
This report is informational no further action required_________
Experiment Center action required as follows:
Distribution of a DQR to users of AERI data is recommended for
the time periods described.
Site Operations action required as follows:
A schedule of cleaning for the central facility AERI scene mirror
is recommended. A procedure for this task should be obtained from
Fred Best of the University of Wisconsin - Madison combined
with a training session on proper techniques.
Archive action required as follows:
None
------------------------------------------------------- |
| Measurements: | sgpaeri01ch1C1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 01/18/1996 | 0000 | 04/09/1996 | 0000 |
| Subject: | Dust on the Scene Mirror |
| DataStreams: | sgpaeri01ch1C1.a1 |
| Description: | DQR No:
Subject: Dust on the AERI-01 Scene Mirror
Date Submitted:
Submitted By: Robert Knuteson
___ Instrument Mentor
___ EST Member
_X_ Science Team Member
___ Other _____________________________
Organization: University of Wisconsin - Madison
Email address: robert.knuteson@ssec.wisc.edu
Telephone: 608-263-7974
Platform/Measurement:
What level data: (raw,a0,a1,b1,c1 etc):
All levels including the following platforms:
sgpaeri01ch1C1.a1
sgpaeri01ch2C1.a1
sgpaeri01summaryC1.a1
sgpaeri01engineerC1.a1
What location was the data collected at: ARM SGP CF
Period(s) of time in question
Period 1: Begin Date Sep/ 1/ 1995 Time 00:00 (GMT)
End Date Dec/ 22/ 1995 Time 00:00 (GMT)
Period 2: Begin Date Jan/ 18/ 1996 Time 00:00 (GMT)
End Date Apr/ 9/ 1996 Time 00:00 (GMT)
Data should be labeled:
_X_ questionable
___ incorrect
___ wrong calibration
___ others _______________________________
Discussion of Problem:
On April 25, 1995 the AERI-01 was installed in an enclosure protruding out
the side of the optical trailer at the ARM SGP central facility. This
configuration was a change from the AERI prototype setup which used
a roof hatch and a "chimney". The reason for the new configuration was
to place the AERI front end (scene mirrors and blackbodies) in an
environment that was much closer in temperature to the outside ambient air.
In that regard the change has been very successful. Unfortunately this
configuration also exposes the AERI scene mirror to contamination by airborne
dust.
At the time of installation only a rough opening to the sky existed with a
wooden hatch that was manually removed and replaced by site personnel during
normal working hours. Most of the time the hatch remained closed. When the
automatic hatch for the AERI-01 system in the ARM SGP CF optical trailer
was installed in July 1995, the percentage of time which the hatch was open
increased dramatically. Since that time there has been
a slow accumulation of dust on the AERI-01 scene mirror. No routine
maintenance (such as mirror cleaning) was defined since this dust
was thought to be only a thoughput problem but not a calibration issue.
However, analysis of the AERI/LBLRTM QME (comparison of observed radiances
to model calculations) indicated that there was a problem with the
AERI-01 observations during the October 1995 ARESE IOP. On Dec 20, 1995
personnel from UW-Madison visited the site and determined that the dust
on the scene mirror was acting as a scattering surface which effectively
broadened the conical field of view to the blackbodies and the sky. This
"broadening" of the field of view would not have lead to a problem except
for the fact that hatch opening is too small at it's current distance from
the instrument to allow the full beam to exit the enclosure. Thus a
fraction of the AERI field of view (the "tail" of the field) was viewing
the ambient temperature area surrounding the hatch opening. This caused
a mixture of ambient temperature emission into the scene, a fact that
is readily apparent when the scene was of a clear, dry sky (such as in the
ARESE IOP).
Period 1 indicated above covers the period from the first of September 1995
when this effect began to be noticeable to December 22, 1995 after the
scene mirror had been cleaned of dust contamination by UW-Madison personnel.
In general the scattering effect is increasing with time as more and more
dust accumulates on the scene mirror, but does show "events" linked to times
when the automatic hatch does not close soon enough and rain drops
fall on the scene mirror. These rain drops seem have the effect of both
making the scattering surfaces more effective (thus worse) and at other
times of actually partially cleaning the mirror if the rain is heavy enough.
Period 2, unfortunately only 4 weeks later, began with a different type
of "event" but leading to the same effect. On Jan 18, 1996 a major winter
storm caused snow to accumulate on the AERI-01 scene mirror (another
example when the automatic hatch did not work properly). When the snow
melted it appears to have left a substantial residue on the scene mirror
leading to an abrupt increase in the scattered energy contribution as
described above. This "dirty" mirror condition persisted until UW-Madison
personnel replaced the scene mirror on April 8, 1996.
Since April 1996, the AERI-01 system has been operating in the previous
manner; thus one can expect that the scene mirror has been accumulating dust
up to the present time. To address this recurring problem, UW-Madison is
developing a procedure that would allow the AERI-01 scene mirror to be
cleaned by site personnel on a regular basis. In addition, automatic
diagnostic information has been developed to identify this problem
immediately and provide feedback to site (and post analysis) personnel.
Furthermore, modifications of the AERI enclosure design are under
investigation that should build in an immunity to this effect at all
future AERI installations.
Other observations/measurements impacted by this problem:
This affects QMEs and other analyses that use the AERI-01 data that
require absolute accuracy better than about 5%.
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
It is likely that this data can and will be corrected. The best
approach to use in the correction is currently under investigation.
REQUIRED ACTIONS:
This report is informational no further action required_________
Experiment Center action required as follows:
Distribution of a DQR to users of AERI data is recommended for
the time periods described.
Site Operations action required as follows:
A schedule of cleaning for the central facility AERI scene mirror
is recommended. A procedure for this task should be obtained from
Fred Best of the University of Wisconsin - Madison combined
with a training session on proper techniques.
Archive action required as follows:
None |
| Measurements: | sgpaeri01ch1C1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 06/10/1997 | 0000 | 06/23/1997 | 2359 |
| Subject: | Software update on the AERI |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1 |
| Description: | On June 10th, staff from the University of Wisconsin-Madison visited the SGP CART site to upgrade the software running on the AERI instrument. While there, they took the opportunity to perform some routine checks of the instrument. Due to these tests, data from 6/10/97 - 6/11/97 should not be ingested or used for scientific studies. The software installed was the same software as will be used on the next generation AERIs (AERI-Nexts). The AERI-Nexts have some improved hardware capabilities, which is taken advantage of by the new software. Unfortunately, as the AERI 01 at the CART site does not have these capabilities, NaNs resulted in a couple of fields in the sgpaeri01summaryC1.a1 platform. These NaNs are placeholders in arrays that were too long for the AERI01 but the correct length for the AERI-Nexts. All valid data (non-NaN data) is correct, and hence these NaNs should be ignored. A routine was modified on 6/24 which effectively fixes the problem (the size of the arrays written out is now determined by the hardware's capabilities, versus outputting a fixed length vector). |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerilbldifflsC1.c1:
sgpaerilblcloudsC1.c1:
sgpaeri01summaryC1.a1:
sgpaeri01engineerC1.a1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 10/04/1997 | 0000 | 10/05/1997 | 2330 |
| Subject: | AERI data effected by failing detector cooler |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| Description: | The AERI mechanical (Stirling Cycle) detector cooler exhibited abnormal behavior during this time period which allowed the detector temperature to fluctuate outside of the normal limits. This cooler had successfully operated for over 21 months at this point, well beyond the expected lifetime before refurbishment. Only the longwave (channel 1) AERI data appears to be effected as the shortwave (channel 2) detector is less sensitive to changes in detector temperature. THE COOLER WAS REPLACED AT 23:00 UTC ON 5 OCTOBER 1997 with a spare by UW personnel who were on site for the WVIOP. |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerich1C1.a2:
sgpaeri01engineerC1.a1:
sgpaerich2C1.a1:
sgpaerich2C1.a2:
sgpaeriprofC1.c1:
sgpaerilbldiffssC1.c1:
sgpaerich1C1.a1:
sgpqmeaerimeansC1.c1:
sgpaerilbldifflsC1.c1:
sgpqmeaerimeansssC1.c1:
sgpaeri01summaryC1.a1:
sgpaerilblcloudsC1.c1:
sgpqmeaerilblssC1.c1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgpaerisummaryC1.a1:
sgpaerisummaryC1.a2:
sgpqmeaerilblC1.c1:
sgpaeriC1.00:
sgpqmeaeriprofC1.c1:
sgpqmeaerilbllsC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 10/03/1997 | 1800 | 10/03/1997 | 2200 |
| Subject: | Tumbleweed in AERI Field of View |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| Description: | It's windy. It's Oklahoma. A tumbleweed somehow manages to fall into the AERI hatch and become lodged in the AERI sky view position. The AERI collects spectra of the tumbleweed until the problem is identified and corrected. In later processing this was shown to effect the AERI temperature retrievals during the period 18:00 - 22:00 UTC. |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerich1C1.a2:
sgpaeri01engineerC1.a1:
sgpaerich2C1.a1:
sgpaerich2C1.a2:
sgpaeriprofC1.c1:
sgpaerilbldiffssC1.c1:
sgpaerich1C1.a1:
sgpqmeaerimeansC1.c1:
sgpaerilbldifflsC1.c1:
sgpqmeaerimeansssC1.c1:
sgpaeri01summaryC1.a1:
sgpaerilblcloudsC1.c1:
sgpqmeaerilblssC1.c1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgpaerisummaryC1.a1:
sgpaerisummaryC1.a2:
sgpqmeaerilblC1.c1:
sgpaeriC1.00:
sgpqmeaeriprofC1.c1:
sgpqmeaerilbllsC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 09/30/1997 | 1600 | 09/30/1997 | 1700 |
| Subject: | CO2 Suppression of AERI Spectra |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaerich1C1.a2, sgpaerich2C1.a1, sgpaerich2C1.a2, sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaerilbldiffssC1.c1, sgpaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblssC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaerimeansssC1.c1, sgpqmeaeriprofC1.c1, sgpaeriC1.00 |
| Description: | At about 1600 UTC 30 September 1997 (970930), the CO2 fire suppression system in the optical trailer went off and AERI-01 detected a local cooling due to the colder air being forced out of the trailer. Over the next few minutes, the CO2 accumulated outside the trailer causing lower transmission to space in the 15 micron region and AERI-01 therfore detected warmer temperatures closer to the surface (T profile decreases with altitude). As more CO2 exited the trailer, the atmosphere at 15 microns became more and more opaque and AERI looses nearly all responsivity in this region. AERI gradually regains responsivity over the next 30 minutes or so as the CO2 diffuses. The strongest absorbing on-line regions from ~650-680 wavenumbers are the last to recover around 1700 UTC. A graphical description of the effect described can be found at: http://www.iop.sgp.arm.gov/~davet/970930/aeri01/index.html Besides the enhanced CO2, the instrument is effected by the rapid change of temperature of inside the optical trailer. This makes all the AERI data during the period 970930 16:00 - 17:00 UTC questionable. |
| Measurements: | sgpaeri01ch1C1.a1:
sgpaerich1C1.a2:
sgpaeri01engineerC1.a1:
sgpaerich2C1.a1:
sgpaerich2C1.a2:
sgpaeriprofC1.c1:
sgpaerilbldiffssC1.c1:
sgpaerich1C1.a1:
sgpqmeaerimeansC1.c1:
sgpaerilbldifflsC1.c1:
sgpqmeaerimeansssC1.c1:
sgpaeri01summaryC1.a1:
sgpaerilblcloudsC1.c1:
sgpqmeaerilblssC1.c1:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgpaerisummaryC1.a1:
sgpaerisummaryC1.a2:
sgpqmeaerilblC1.c1:
sgpaeriC1.00:
sgpqmeaeriprofC1.c1:
sgpqmeaerilbllsC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 10/01/1996 | 0000 | 06/30/1997 | 2359 |
| Subject: | SGP/AERI/C1 - Reprocessed: radiance data |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01summaryC1.a1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpaeriprofC1.c1, sgplblch1C1.c1, sgplblch1lsC1.c1, sgplblch2C1.c1, sgplblch2lsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1, sgpaeri01C1.00 |
| Description: | Due to a software error in the real-time calibration software, the AERI-01 radiance data
between 10/96 and 6/97 were incorrectly calibrated. All of the AERI-01 radiance data
collected at the SGP central facility during this time period was corrupted by this software
error and were reprocessed to correct the radiance data. The error also affected all
derived products of the AERI radiance data. AERI data collected prior to and after this time
period was unaffected by this programming error.
The proper calibrated radiance spectra was recovered from the raw archived dataset through
post-processing. This reprocessing of the AERI data was carried out by the instrument
mentor at PNNL and confirmed independently by Univ. of Wisconsin. The reprocessed AERI
radiance data during the period 10/96 to 6/97 supercedes all previous versions of the AERI
data in all instances.
reprocessed, archived 9/99:
sgpaeri01C1.00
reprocessed, archived 10/99:
sgpaeri01ch1C1.a1
sgpaeri01ch2C1.a1
sgpaeri01engineerC1.a1
sgpaeri01summaryC1.a1
sgpaerilbldiffC1.c1
sgpaerilbldifflsC1.c1
sgplblch1C1.c0
sgplblch1C1.c1
sgplblch1lsC1.c0
sgplblch1lsC1.c1
sgplblch2C1.c0
sgplblch2C1.c1
sgplblch2lsC1.c0
sgplblch2lsC1.c1
sgpqmeaerilblC1.c1
sgpqmeaerilbllsC1.c1
sgpqmeaerimeansC1.c1
reprocessed, archived 11/99:
sgpaeriprofC1.c1
sgpqmeaeriprofC1.c1
not reprocessed:
sgpaerilblcloudsC1.c1
sgpaerilbldiffssC1.c1
sgpqmeaerilblssC1.c1
sgpqmeaerimeansssC1.c1 |
| Measurements: | sgpaeri01ch1C1.a1:
sgplblch2lsC1.c1:
sgpaeriprofC1.c1:
sgpqmeaerimeansC1.c1:
sgplblch1lsC1.c1:
sgpaerilbldifflsC1.c1:
sgpaeri01summaryC1.a1:
sgpaeri01C1.00:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgplblch2C1.c1:
sgpqmeaerilblC1.c1:
sgplblch1C1.c1:
sgpqmeaerilbllsC1.c1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 11/19/1999 | 1930 | 11/22/1999 | 1750 |
| Subject: | SGP/AERI - AERI01 scene mirror motor failure |
| DataStreams: | sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1, sgpaerilbldiffC1.c1, sgpaeriprofC1.c1, sgplblch1C1.c1, sgplblch1lsC1.c1, sgplblch2C1.c1, sgplblch2lsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1, sgpqmeaeriprofC1.c1, sgpgaeriprofC1.c1, sgpaeri01C1.00 |
| Description: | During this time interval, the AERI scene mirror motor control was not operating, resulting in a complete loss of spectral radiance data including any associated brightness temperatures. This data should not be used. |
| Measurements: | sgplblch2lsC1.c1:
sgpaeri01ch1C1.a1:
sgpaeri01engineerC1.a1:
sgpaeriprofC1.c1:
sgpqmeaerimeansC1.c1:
sgplblch1lsC1.c1:
sgpgaeriprofC1.c1:
sgpaeri01summaryC1.a1:
sgpaeri01C1.00:
sgpaeri01ch2C1.a1:
sgpaerilbldiffC1.c1:
sgplblch2C1.c1:
sgpqmeaerilblC1.c1:
sgplblch1C1.c1:
sgpqmeaeriprofC1.c1:
sgpqmeaerilbllsC1.c1:
|