PVC/SKYRAD/M1 - Intake Fan Failure

PSP (down_short_hemisp) ventilator fan failed from start of PVC deployment.  Site ops 
repaired/replaced on 8/28. Instrument data are not recoverable.

The down_short_hemisp data are not recoverable but can be re-constructed using the 
short_direct_normal and down_short_diffuse_hemispheric measurements and the following formula: 

Global = Direct * cos(zenith angle) + Diffuse

• inst_global

• Radiation, shortwave, downwelling total hemispheric irradiance, 1-min avg(down_short_hemisp)
• Downwelling Shortwave Hemispheric Irradiance, Ventilated Pyranometer, Minima(down_short_hemisp_min)
• Downwelling Shortwave Hemispheric Irradiance, Ventilated Pyranometer, Maxima(down_short_hemisp_max)
• down_short_hemisp_std

PVC/SKYRAD/M1 - Reprocess: Incorrect calibration coefficients

Incorrect programs were used in Skyrad since PVC deployment period began.  The Skyrad 
program was corrected 09/05/2012 approx 20:00GMT. Reprocessing will be required of all 
instruments at this station except the IRT. This will require applying the following 
corrections for the time range specified. 
Serial numbers(incorrectly applied): 
PIR1-DIR: 34306
PIR2-DIR: 34303
Diffuse PSP: 34284
NIP: 34097
PSP-DS: 34293

Serial numbers(correct): 
PIR1-DIR: 34303
PIR2-DIR: 34306
Diffuse PSP: 35751
NIP: 37285
PSP-DS: 37302
    
Data: 
Longwave requires reprocessing using the 20second datastream and applying the following k1 
coefficients (note: the longwave instruments were swapped according to datalogger).
down_long_hemisp1 (old cal) = 0.23041
down_long_hemisp1 (corr cal) = 0.24750
down_long_hemisp2 (old cal) = 0.24750
down_long_hemisp2 (corr cal) = 0.23041

Shortwave only requires application of the following corrections to 1min and 20 second 
data.
down_short_diffuse_hemisp(corr) = down_short_diffuse_hemisp(old value)*(104.45(corr 
cal)/120.91(incorr cal))
short_direct_normal(corr) = short_direct_normal(old value)*(117.25(new cal)/124.97(incorr 
cal))
up_short_hemip(corr) = up_short_hemip(old value)*(119.21(new cal)/108.48(incorr cal))

Contact radiometer mentor with any comments/questions

• inst_down_long_hemisp1_case_resist
• inst_global
• inst_diffuse
• inst_direct_normal
• inst_down_long_hemisp2_case_resist
• inst_down_long_hemisp2_dome_resist
• inst_down_long_hemisp1_dome_resist
• inst_down_long_hemisp1_tp
• inst_down_long_hemisp2_tp

• Shortwave Direct Normal Irradiance, Pyrheliometer, Maxima(short_direct_normal_max)
• down_long_hemisp2_std
• Radiation, shortwave, downwelling total hemispheric irradiance, 1-min avg(down_short_hemisp)
• inst_down_long_hemisp2_case_temp
• Downwelling Longwave Hemispheric Irradiance, Shaded Pyrgeometer1(down_long_hemisp1)
• Downwelling Longwave Hemispheric Irradiance, Shaded Pyrgeometer2(down_long_hemisp2)
• Radiation, shortwave, downwelling diffuse hemispheric irradiance, 1-min avg(down_short_diffuse_hemisp)
• Downwelling Shortwave Hemispheric Irradiance, Ventilated Pyranometer, Maxima(down_short_hemisp_max)
• inst_down_long_hemisp2_tp
• down_long_hemisp1_max
• down_long_hemisp2_min
• Downwelling Shortwave Diffuse Hemisp. Irrad., Ventilated Pyranometer, Maxima(down_short_diffuse_hemisp_max)
• down_long_hemisp1_std
• Radiation, shortwave, direct normal irradiance, 1-min avg(short_direct_normal)
• Downwelling Shortwave Diffuse Hemisp. Irrad., Ventilated Pyranometer, Minima(down_short_diffuse_hemisp_min)
• down_short_diffuse_hemisp_std
• short_direct_normal_std
• down_long_hemisp2_max
• Shortwave Direct Normal Irradiance, Pyrheliometer, Minima(short_direct_normal_min)
• Downwelling Shortwave Hemispheric Irradiance, Ventilated Pyranometer, Minima(down_short_hemisp_min)
• down_short_hemisp_std
• inst_down_long_hemisp2_dome_temp
• inst_down_long_hemisp1_case_temp
• inst_down_long_hemisp1_dome_temp
• down_long_hemisp1_min
• inst_down_long_hemisp1_tp

PVC/SKYRAD/M1 - Reprocess: Incorrect IRT Configuration

The SKYRAD IRT was installed temporarily (waiting for the new enclosure) in
a vertical orientation, without the use of the gold mirror. When irt_comm
was started, the emissivity parameter in the startup file was not changed to 1.000 
compensate for the absence of the mirror, resulting in a positive bias of about 5 K.

These data may be corrected by adjusting the radiance values for the difference in 
emmissivity.

• sky_ir_temp_min
• IR Brightness Temperature(sky_ir_temp)
• sky_ir_temp_max

PVC/SKYRAD/M1 - IRT failure

The IRT failed because of water intrusion.

• inst_sky_ir_signal

• sky_ir_temp_std
• sky_ir_temp_min
• IR Brightness Temperature(sky_ir_temp)
• sky_ir_temp_max

PVC/SKYRAD/M1 - IRT scale factor

The IRT was replaced with a unit with the wrong analog output configuration, such that the 
sky temperature was below the measurable range, resulting in a constant output of 0 
volts or 173.2 K.

• inst_sky_ir_signal

• sky_ir_temp_std
• sky_ir_temp_min
• IR Brightness Temperature(sky_ir_temp)
• sky_ir_temp_max