Data Quality Reports for Session: 142953 User: sbenson Completed: 06/07/2012


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D091210.1NSA/VCEIL/C1 - Degraded windownsavceil25kC1.b1
D100215.3NSA/VCEIL/C1/C2 - Reprocess: Incorrect serial_number and sum_backscatter fieldsnsavceil25kC1.b1, nsavceil25kC2.b1


DQRID : D091210.1
Start DateStart TimeEnd DateEnd Time
05/02/2006000012/03/20092107
Subject:
NSA/VCEIL/C1 - Degraded window
DataStreams:nsavceil25kC1.b1
Description:
The ceilometer continuously gave warnings for window contamination because the window had 
deteriorated. Cloud base height detection did not appear to be significantly affected. 
The window conditioner was replaced on 8/11/09 but this did not clear the warning. The 
instrument was replaced.
Measurements:nsavceil25kC1.b1:
  • Third cloud base height(third_cbh)
  • alt_highest_signal
  • Second lowest cloud base height(second_cbh)
  • status_flag
  • sum_backscatter
  • Lowest cloud base height detected.(first_cbh)
  • Backscatter(backscatter)
  • status_string
  • background_light
  • Vertical visibility(vertical_visibility)
  • window_contamination


Back To Table of Contents

DQRID : D100215.3
Start DateStart TimeEnd DateEnd Time
08/22/1999000010/31/20092359
Subject:
NSA/VCEIL/C1/C2 - Reprocess: Incorrect serial_number and sum_backscatter fields
DataStreams:nsavceil25kC1.b1, nsavceil25kC2.b1
Description:
Attribute serial_number: In most cases, this field is not representative of the actual 
serial number of the instrument because the value did not change when an instrument changed 
locations or was replaced with a spare.
   
Variable sum_backscatter: An out-of-range condition for the "sum of detected and 
normalized backscatter" was reported as 0 instead of missing (-9999). The valid range is 0 - 
0.0999 /srad.
   
This DQR also applies to a1 and b1 level data collected prior to the begin date.
Measurements:nsavceil25kC2.b1:
  • sum_backscatter

nsavceil25kC1.b1:
  • sum_backscatter


Back To Table of Contents



END OF DATA