| Description: | Instrument temperatures were incorrect. On 02/01 and 02/03 they essentially flat lined at
0 C, while on 02/02 the temps were lower than normal (although given the external temp
they may be accurate), with several data spikes throughout the day.
Background signal values were excessively low throughout the entire period. Co- and
cross-pol plotted values appear to have had a 3-5 km artificial elevation, resulting in plotted
cloud bases appearing much higher than they actually were.
System was not operating correctly due to water intrusion. |
| Measurements: | sgpmplpolfsC1.b1: - num_channels
- background_signal_co_pol
- num_bins
- range
- dead_time_corrected
- Pressure, associated geometric height, at altitude, NGM model output(height)
- pulse_rep
- Attenuated backscatter, cross pol(signal_return_cross_pol)
- background_signal_std_cross_pol
- laser_temp
- first_data_bin
- background_signal_cross_pol
- overlap_correction
- detector_temp
- range_bin_width
- max_altitude
- Attenuated backscatter, copol(signal_return_co_pol)
- overlap_correction_heights
- mcs_mode
- polarization_control_voltage
- polarization_control
- deadtime_correction_counts
- deadtime_correction
- background_signal_std_co_pol
- range_bin_time
- range_bins
- range_offset
- energy_monitor
- Preliminary cloud base height above ground level(preliminary_cbh)
- scope_temp
- HLN(VN)
|