TWP/SONDE/C1 - Bad RH at beginning of sounding

It appears that the RH sensor heating circuit failed during this portion of the sounding 
(approximately between 0km and 11km).  The RH oscillates rapidly between low (~5 %RH) and 
not so low (~70 %RH) and the oscillation seems to stop when the temperature is below ~40 
degC.  According to Vaisala these are symptoms of failure in the ASIC (application 
specific integrated circuit) that controls the heating.

• Humidity, relative(rh)
• Dewpoint Temperature(dp)

TWP/SONDE/C1 - Bad RH at beginning of sounding

It appears that the RH sensor heating circuit failed during this portion of the sounding 
(approximately between 0km and 12km).  The RH oscillates rapidly between low (~2 %RH) and 
not so low (~80 %RH) and the oscillation seems to stop when the temperature is below ~40 
degC.  According to Vaisala these are symptoms of failure in the ASIC (application 
specific integrated circuit) that controls the heating.

• Humidity, relative(rh)
• Dewpoint Temperature(dp)

TWP/SONDE/C1 - Surface RH value incorrect

The surface RH value of 77% when the value should have been in the low 60's.  It appears 
the observers did not allow the sonde to equilibrate to ambient conditions before 
collecting the surface data.  This error also caused the dew point to be incorrect.

• Humidity, relative(rh)
• Dewpoint Temperature(dp)

TWP/SONDE/C1 - Wind data missing

A GPS problem associated with Vaisala BBSS ground station software issues caused the 
ground stations to enter into an error state when using GPS wind finding. In some instances, 
the flight was aborted due to the error state and not data was collected.  A workaround 
was developed to allow sondes to be launched without collecting wind data.

• Northward Wind Component(v_wind)
• Eastward Wind Component(u_wind)
• wstat
• Mean Wind Speed(wspd)