GRW/VCEIL/M1 - Receiver failure

The AMF VCEIL had lower-than-normal laser transmitter power, ~84%, so the instrument was 
replaced with a spare on 4/22. The spare VCEIL had just been repaired but began to display 
receiver failure warnings.

Diagnostic information was sent to Vaisala and we discussed either replacing the receiver 
with the one from the original VCEIL (with the degraded transmitter) or replacing the 
transmitter in the original VCEIL with the one from the spare. Vaisala recommended the 
latter because the original VCEIL is a much newer unit.

On 5/16, the site operator replaced the transmitter in the original VCEIL with the one 
from the spare, realigned the optics, recalibrated the laser, and put the instrument back 
into service, successfully correcting the problem.

The data during this period were intermittently incorrect, containing warning flags and 
alarms and unreasonable cloud base heights.

• Vertical visibility(vertical_visibility)
• Lowest cloud base height detected.(first_cbh)
• background_light
• Backscatter(backscatter)
• Third cloud base height(third_cbh)
• Second lowest cloud base height(second_cbh)
• alt_highest_signal

GRW/MPL/M1 - Missing data

Data are missing and unrecoverable.

• background_signal_co_pol
• Pressure, associated geometric height, at altitude, NGM model output(height)
• lat
• Attenuated backscatter, copol(signal_return_co_pol)
• aqc_signal_return_cross_pol
• range_offset
• num_channels
• alt
• energy_monitor
• max_altitude
• laser_temp
• detector_temp
• background_signal_std_cross_pol
• polarization_control_voltage_co_pol
• Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
• pulse_rep
• nsamples_co_pol_average
• lon
• polarization_control_voltage_cross_pol
• background_signal_cross_pol
• base_time
• time
• time_offset
• range_bin_width
• range
• scope_temp
• Attenuated backscatter, cross pol(signal_return_cross_pol)
• num_bins
• dead_time_corrected
• background_signal_std_co_pol
• Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
• nsamples_cross_pol_average
• range_bins
• shots_per_sample
• aqc_signal_return_co_pol

• scope_temp
• Attenuated backscatter, copol(signal_return_co_pol)
• shots_per_sample
• lat
• energy_monitor
• time
• base_time
• polarization_control_voltage_cross_pol
• time_offset
• num_bins
• range
• num_channels
• polarization_control_voltage_co_pol
• background_signal_std_co_pol
• pulse_rep
• background_signal_co_pol
• laser_temp
• background_signal_std_cross_pol
• nsamples_cross_pol_average
• aqc_signal_return_cross_pol
• lon
• detector_temp
• dead_time_corrected
• range_bins
• alt
• Pressure, associated geometric height, at altitude, NGM model output(height)
• Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
• nsamples_co_pol_average
• range_offset
• max_altitude
• Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
• Attenuated backscatter, cross pol(signal_return_cross_pol)
• aqc_signal_return_co_pol
• background_signal_cross_pol
• range_bin_width

• pulse_rep
• polarization_control
• scope_temp
• num_channels
• range_bins
• signal_return
• max_altitude
• background_signal_std
• time_offset
• range_offset
• lat
• energy_monitor
• polarization_control_voltage
• lon
• background_signal
• range_bin_time
• detector_temp
• Pressure, associated geometric height, at altitude, NGM model output(height)
• shots_per_avg
• time
• alt
• laser_temp
• num_bins
• range
• Preliminary cloud base height above ground level(preliminary_cbh)
• range_bin_width
• base_time
• dead_time_corrected

GRW/VCEIL/M1 - Reprocess: Incorrect serial_number and sum_backscatter fields

Attribute serial_number: In most cases, this field is not representative of the actual 
serial number of the instrument because the value did not change when an instrument changed 
locations or was replaced with a spare.
   
Variable sum_backscatter: An out-of-range condition for the "sum of detected and 
normalized backscatter" was reported as 0 instead of missing (-9999). The valid range is 0 - 
0.0999 /srad.

• sum_backscatter

GRW/MPL/M1 - Time clock Error

Domain Time II was not installed or working properly on the MPLPOL instrument at the 
initial start at GRW.  The clock was off by 5 minutes 55 seconds at the beginning of the 
period and drifted further so it was off by 6 minutes 8 seconds at the end of the time period.

• time
• base_time
• time_offset

• base_time
• time_offset
• time

• time_offset
• time
• base_time