Data Quality Reports for Session: 135080 User: goulven1mo Completed: 05/25/2011


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D020313.1SGP/THWAPS/C1 - THWAPS C1 miscalibratedsgpthwapsC1.a1, sgpthwapsC1.b1
D030917.21SGP/THWAPS/B1/B5/B6/C1 - Missing data due to Ice storm and clock problemssgpthwapsB1.00, sgpthwapsB1.a1, sgpthwapsB1.b1, sgpthwapsB5.00, sgpthwapsB5.a1,
sgpthwapsB5.b1, sgpthwapsB6.00, sgpthwapsB6.a1, sgpthwapsB6.b1, sgpthwapsC1.00, sgpthwapsC1.a1,
sgpthwapsC1.b1
D041123.1SGP/THWAPS/C1 - RH Sensor CalibrationsgpthwapsC1.b1
D050812.12SGP/THWAPS/C1 - Minor bias in saturation vapor pressuresgpthwapsC1.b1


DQRID : D020313.1
Start DateStart TimeEnd DateEnd Time
03/09/2002034004/23/20021418
Subject:
SGP/THWAPS/C1 - THWAPS C1 miscalibrated
DataStreams:sgpthwapsC1.a1, sgpthwapsC1.b1
Description:
Power outages apparently led to the THWAPS HMP233 temperature and RH sensor
being replaced at C1.  The power went out at 0340 on 3/9 was restored at
0635 and went out again at 2025.

The new HMP233 appears to be incorrectly calibrated and all temperature
data since its installation are wrong.  If I am correct about the nature
of the calibration problem, the true average temperature can be recovered
from that recorded by a linear conversion, but I don't think its worth the
trouble.
Measurements:sgpthwapsC1.b1:
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Temperature, air(temp)
  • Humidity, relative(rh)

sgpthwapsC1.a1:
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • Humidity, relative(rh)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Temperature, air(temp)


Back To Table of Contents

DQRID : D030917.21
Start DateStart TimeEnd DateEnd Time
03/09/2002205503/11/20022005
03/13/2002175503/14/20021505
Subject:
SGP/THWAPS/B1/B5/B6/C1 - Missing data due to Ice storm and clock problems
DataStreams:sgpthwapsB1.00, sgpthwapsB1.a1, sgpthwapsB1.b1, sgpthwapsB5.00, sgpthwapsB5.a1,
sgpthwapsB5.b1, sgpthwapsB6.00, sgpthwapsB6.a1, sgpthwapsB6.b1, sgpthwapsC1.00, sgpthwapsC1.a1,
sgpthwapsC1.b1
Description:
Data are missing due to power failures caused by an ice storm
and resulting system/instrument clock problems.
Measurements:sgpthwapsC1.b1:
  • alt
  • Mean Wind Speed(wspd)
  • lon
  • base_time
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • Temperature, air(temp)
  • Unit Vector Wind Direction(wdir)
  • time_offset
  • sd_vap_pres
  • sd_wdir
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • sd_pres
  • Humidity, relative(rh)
  • vbat
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • lat

sgpthwapsB5.00:
  • Raw data stream - documentation not supported

sgpthwapsC1.a1:
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Temperature, air(temp)
  • sd_vap_pres
  • vbat
  • lon
  • alt
  • time_offset
  • Humidity, relative(rh)
  • base_time
  • sd_wdir
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • sd_pres
  • Unit Vector Wind Direction(wdir)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • lat
  • Mean Wind Speed(wspd)
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)

sgpthwapsB6.a1:
  • sd_wdir
  • sd_pres
  • Mean Wind Speed(wspd)
  • base_time
  • lon
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • vbat
  • Temperature, air(temp)
  • Unit Vector Wind Direction(wdir)
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • sd_vap_pres
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Humidity, relative(rh)
  • lat
  • time_offset
  • alt

sgpthwapsC1.00:
  • Raw data stream - documentation not supported

sgpthwapsB6.b1:
  • Humidity, relative(rh)
  • base_time
  • sd_pres
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • vbat
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • sd_wdir
  • Unit Vector Wind Direction(wdir)
  • lon
  • Mean Wind Speed(wspd)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • Temperature, air(temp)
  • time_offset
  • alt
  • sd_vap_pres
  • lat

sgpthwapsB1.00:
  • Raw data stream - documentation not supported

sgpthwapsB1.b1:
  • Mean Wind Speed(wspd)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • sd_vap_pres
  • lat
  • Humidity, relative(rh)
  • Unit Vector Wind Direction(wdir)
  • Temperature, air(temp)
  • time_offset
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • lon
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • sd_wdir
  • vbat
  • alt
  • base_time
  • sd_pres

sgpthwapsB1.a1:
  • sd_wdir
  • lat
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • base_time
  • Humidity, relative(rh)
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • time_offset
  • Temperature, air(temp)
  • sd_pres
  • lon
  • vbat
  • sd_vap_pres
  • Unit Vector Wind Direction(wdir)
  • alt
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • Mean Wind Speed(wspd)

sgpthwapsB6.00:
  • Raw data stream - documentation not supported

sgpthwapsB5.a1:
  • lon
  • Mean Wind Speed(wspd)
  • lat
  • Unit Vector Wind Direction(wdir)
  • Humidity, relative(rh)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • base_time
  • sd_pres
  • vbat
  • time_offset
  • alt
  • sd_vap_pres
  • Temperature, air(temp)
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • sd_wdir
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)

sgpthwapsB5.b1:
  • lon
  • sd_pres
  • vbat
  • sd_vap_pres
  • Humidity, relative(rh)
  • Unit Vector Wind Direction(wdir)
  • time_offset
  • Temperature, air, 30-min intervals, standard deviation(sd_temp)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • alt
  • Pressure, atmospheric, constant value of model level, RUC model output(pres)
  • lat
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Temperature, air(temp)
  • sd_wdir
  • base_time
  • Mean Wind Speed(wspd)


Back To Table of Contents

DQRID : D041123.1
Start DateStart TimeEnd DateEnd Time
11/16/2004213511/29/20041930
Subject:
SGP/THWAPS/C1 - RH Sensor Calibration
DataStreams:sgpthwapsC1.b1
Description:
The analog output for the T/RH probe was incorrectly calibrated.  This
caused excessively high readings of RH.
Measurements:sgpthwapsC1.b1:
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)
  • Humidity, relative, 30-min intervals, standard deviation(sd_rh)
  • sd_vap_pres
  • Humidity, relative(rh)


Back To Table of Contents

DQRID : D050812.12
Start DateStart TimeEnd DateEnd Time
09/21/1999000008/10/20051445
Subject:
SGP/THWAPS/C1 - Minor bias in saturation vapor pressure
DataStreams:sgpthwapsC1.b1
Description:
The saturation vapor correction when temps are below 0C contained an error
in the multiplier.  The incorrect multiplier only equates to an error of
0.01 kPa which is less than the stated uncertainty of the measurement (+/-
0.035 kPa).
Measurements:sgpthwapsC1.b1:
  • Pressure, vapor, 60-m height, 30-min intervals(vap_pres)


Back To Table of Contents



END OF DATA