| DQR ID | Subject | Data Streams Affected |
|---|---|---|
| D060928.3 | SGP/SONDE/C1 - Increased precision for alt, dp, pres, rh, tdry | sgpsondewnpnC1.b1 |
| D100215.1 | SGP/VCEIL/C1/B4/B5/B6 - Reprocess: Incorrect serial_number and sum_backscatter fields | sgpvceil25kB4.b1, sgpvceil25kB5.b1, sgpvceil25kB6.b1, sgpvceil25kC1.b1 |
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 09/28/2006 | 1728 | 12/31/9999 | 2359 |
| Subject: | SGP/SONDE/C1 - Increased precision for alt, dp, pres, rh, tdry |
| DataStreams: | sgpsondewnpnC1.b1 |
| Description: | The output precision of the following variables was increased 20060928 alt changed from 1m to 0.1m dp changed from 0.1degC to 0.01degC pres changed from 0.1 hPa to 0.01 hPa RH changed from 1%RH to 0.01%RH tdry changed from .1degC to 0.01degC Note that the increase in precision does not necessarily imply an increase in accuracy. Users are cautioned to continue to use their best scientific judgement when using these or any other data. |
| Measurements: | sgpsondewnpnC1.b1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 04/01/2001 | 0000 | 10/31/2009 | 2359 |
| Subject: | SGP/VCEIL/C1/B4/B5/B6 - Reprocess: Incorrect serial_number and sum_backscatter fields |
| DataStreams: | sgpvceil25kB4.b1, sgpvceil25kB5.b1, sgpvceil25kB6.b1, sgpvceil25kC1.b1 |
| Description: | Attribute serial_number: In most cases, this field is not representative of the actual serial number of the instrument because the value did not change when an instrument changed locations or was replaced with a spare. Variable sum_backscatter: An out-of-range condition for the "sum of detected and normalized backscatter" was reported as 0 instead of missing (-9999). The valid range is 0 - 0.0999 /srad. This DQR also applies to a1 level data collected prior to b1 level. |
| Measurements: | sgpvceil25kC1.b1:
sgpvceil25kB4.b1:
sgpvceil25kB6.b1:
sgpvceil25kB5.b1:
|