Data Quality Reports for Session: 133007 User: roj Completed: 02/06/2011


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D020227.8SGP/MPL/C1 - Data missing due to hardware failuressgpmplC1.00, sgpmplC1.a0, sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcbh1scottC1.c0,
sgpmplcbh1scottC1.c1
D040424.1SGP/MPL/C1 - Signal degradingsgpmplC1.a1, sgpmplnor1campC1.c1
D040426.4SGP/MPL/C1 - Detector FailuresgpmplC1.a1, sgpmplnor1campC1.c1
D040525.28SGP/MPL/C1 - Metadata errorssgpmplC1.a1, sgpmplnor1campC1.c1
D040706.4SGP/MPL/C1 - Reduced detection sensitivitysgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
D050421.14SGP/MPL/C1 - Sensor CalibrationsgpmplC1.00, sgpmplC1.a1
D050914.3SGP/MPL/C1 - Instrument offlinesgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
D970408.3Continuing signal degradationsgpmplC1.a1, DsgpmplC1.00, sgpmplcbh1scottC1.c1
D990224.1SGP/MPL - Missing data due to blown detectorsgpmplC1.a1, DsgpmplhrC1.00, sgpmplnor1campC1.c1, sgpmplcbh1scottC1.c1


DQRID : D020227.8
Start DateStart TimeEnd DateEnd Time
08/10/2001000010/29/20012033
Subject:
SGP/MPL/C1 - Data missing due to hardware failures
DataStreams:sgpmplC1.00, sgpmplC1.a0, sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcbh1scottC1.c0,
sgpmplcbh1scottC1.c1
Description:
The MPL instrument was out of service during the time
range specified due to hardware failures. Data during
this period are missing and unrecoverable.
Measurements:sgpmplC1.a0:
  • base_time
  • cloud_base_height_dq_flag
  • lat
  • Cloud base height(cloud_base_height)
  • detector_temp
  • laser_temp
  • energy_monitor
  • alt
  • time_offset
  • pulse_rep
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • shots_summed
  • background_signal
  • voltage_05
  • instrument_temperature
  • lon
  • filter_temp
  • instrument_temp
  • Backscatter(backscatter)
  • voltage_10
  • voltage_15

sgpmplcbh1scottC1.c1:
  • Preliminary cloud base height above ground level(cbh)
  • lon
  • alt
  • base_time
  • time_offset
  • lat

sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • background_signal
  • total_counts
  • lat
  • shots_sum
  • range
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • random_error
  • cloud_mask_2
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp

sgpmplC1.00:
  • Raw data stream - documentation not supported

sgpmplcbh1scottC1.c0:
  • Raw data stream - documentation not supported


Back To Table of Contents

DQRID : D040424.1
Start DateStart TimeEnd DateEnd Time
09/25/2002000001/16/20032359
Subject:
SGP/MPL/C1 - Signal degrading
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1
Description:
The MPL viewport window was blown off during a storm on 2002/09/25.  The MPL received a 
soaking of rain.  Following this event, although site operations cleaned and dried the 
optics, the lidar performance continued to degrade over the next few months.  Although 
initially suitable for cloud detection, by Dec 10th the lidar was providing useful results only 
during the day (oddly enough).  By Jan 16, the detector was dead.  

It is not recommended to depend on night-time cloud base heights after Dec. 10 2002. 

It is not recommended to use any of the data after 9/25 for aerosol retrievals.
Measurements:sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • total_counts
  • background_signal
  • lat
  • range
  • shots_sum
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • cloud_mask_2
  • random_error
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp


Back To Table of Contents

DQRID : D040426.4
Start DateStart TimeEnd DateEnd Time
01/16/2003000001/31/20032359
Subject:
SGP/MPL/C1 - Detector Failure
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1
Description:
The detector failed following a period of data quality degradation.  The MPL was replaced 
on 1/31/2003.
Measurements:sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • total_counts
  • background_signal
  • lat
  • range
  • shots_sum
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • cloud_mask_2
  • random_error
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp


Back To Table of Contents

DQRID : D040525.28
Start DateStart TimeEnd DateEnd Time
05/01/1996000001/19/20002359
Subject:
SGP/MPL/C1 - Metadata errors
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1
Description:
The latitude, longitude and altitude of the Micropulse Lidar
(MPL) were incorrectly entered into the ARM database.  The 
correct location of the SGP.C1 MPL is:
   Lat: 36.606N
   Lon: 97.485W
   Alt:    316m
Measurements:sgpmplC1.a1:
  • lat
  • lon
  • alt

sgpmplnor1campC1.c1:
  • lon
  • lat
  • alt


Back To Table of Contents

DQRID : D040706.4
Start DateStart TimeEnd DateEnd Time
07/01/2004150007/07/20040350
07/23/2004220009/10/20042100
Subject:
SGP/MPL/C1 - Reduced detection sensitivity
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
Description:
During the time periods indicated, the laser power supply was low.  This resulted in 
compromised detection sensitivity, particularly for thin clouds and/or during daylight hours.  
That is, some clouds may not have been identified.  The low laser power would not have 
resulted in false positives.
Measurements:sgpmplC1.a1:
  • Preliminary cloud base height above ground level(preliminary_cbh)

sgpmplnor1campC1.c1:
  • Cloud base height(cloud_base_height)
  • cloud_mask_2
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • cloud_top_attenuation_flag

sgpmplsmask1clothC1.c1:
  • MPL Cloth et al. Algorithm Significance Mask(SigniMaskMplCloth)

sgpmplcmask1clothC1.c1:
  • MPL Cloth et al. Algorithm Cloud Mask(CloudMaskMplCloth)


Back To Table of Contents

DQRID : D050421.14
Start DateStart TimeEnd DateEnd Time
11/03/2004000002/23/20052300
Subject:
SGP/MPL/C1 - Sensor Calibration
DataStreams:sgpmplC1.00, sgpmplC1.a1
Description:
The Energy Monitor records the value of the laser energy. During the time in question, the 
laser energy exceed the maximum value in the calibration table for the energy monitor. 
In other words, the value is pegged. This condition does not affect the backscatter 
signal. But it will prevent users from normalizing the backscatter signal to the laser output.
Measurements:sgpmplC1.a1:
  • energy_monitor

sgpmplC1.00:
  • Raw data stream - documentation not supported


Back To Table of Contents

DQRID : D050914.3
Start DateStart TimeEnd DateEnd Time
07/07/2004035007/23/20042150
Subject:
SGP/MPL/C1 - Instrument offline
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
Description:
Instrument was taken offline due to a failure of the laser power supply.  Data are missing 
and unrecoverable.
Measurements:sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • total_counts
  • background_signal
  • lat
  • range
  • shots_sum
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • cloud_mask_2
  • random_error
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp

sgpmplsmask1clothC1.c1:
  • time_offset
  • MPL Cloth et al. Algorithm Significance Mask(SigniMaskMplCloth)
  • Heights
  • base_time

sgpmplcmask1clothC1.c1:
  • time_offset
  • base_time
  • Heights
  • MPL Cloth et al. Algorithm Cloud Mask(CloudMaskMplCloth)


Back To Table of Contents

DQRID : D970408.3
Start DateStart TimeEnd DateEnd Time
03/17/1997000004/14/19972359
Subject:
Continuing signal degradation
DataStreams:sgpmplC1.a1, DsgpmplC1.00, sgpmplcbh1scottC1.c1
Description:
Despite recent efforts (970310-970314) by the instrument mentor, signal 
degradation of the MPL has continued.  The degradation has continued to the 
point that the effective range of the MPL is nearing 10 km.  The instrument mentor and PI 
have 
concluded that an overhaul of the instrument by the vendor is in order.
Measurements:sgpmplcbh1scottC1.c1:
  • Preliminary cloud base height above ground level(cbh)
  • base_time
  • time_offset
  • lon
  • lat
  • alt

sgpmplC1.a1:
  • lat
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • shots_sum
  • range
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • voltage_05
  • filter_temp
  • trigger_freq
  • time
  • max_altitude
  • energy_monitor
  • range_bins
  • transceiver_altitude_angle
  • detector_temp
  • shots_summed
  • deadtime_correction
  • voltage_15
  • alt
  • property
  • voltage_10
  • range_bin_width
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • background_signal
  • total_counts
  • transceiver_azimuth_angle

DsgpmplC1.00:
  • Development raw data stream - documentation not supported


Back To Table of Contents

DQRID : D990224.1
Start DateStart TimeEnd DateEnd Time
11/11/1998000001/23/19992359
Subject:
SGP/MPL - Missing data due to blown detector
DataStreams:sgpmplC1.a1, DsgpmplhrC1.00, sgpmplnor1campC1.c1, sgpmplcbh1scottC1.c1
Description:
Sometime early 11/11 the detector on the
MPL-004 blew out.  The Detector was replaced by Albert Mendoza.
The instrument was operational on Jan. 23, 1999.

Link this to P981119.2 that reported the blown detector and the
corrective action taken
Measurements:sgpmplcbh1scottC1.c1:
  • Preliminary cloud base height above ground level(cbh)
  • lon
  • alt
  • base_time
  • time_offset
  • lat

sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • total_counts
  • background_signal
  • lat
  • range
  • shots_sum
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • random_error
  • cloud_mask_2
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp

DsgpmplhrC1.00:
  • Development raw data stream - documentation not supported


Back To Table of Contents



END OF DATA