DQRs for Session: 132281 User:matthias1jCompleted: 12-29-2010

Data Quality Reports for Session: 132281 User: matthias1j Completed: 12/29/2010

TABLE OF CONTENTS

DQR ID	Subject	Data Streams Affected
D070105.2	NSA/MPL/C1 - Detector Failure	nsamplpolC1.b1
D070122.1	NSA/MPL/C1 - Missing data	nsamplpolC1.b1
D070608.1	NSA/MPL/C1 - No cross polarized data	nsamplpolC1.b1
D071022.3	NSA/MPL/C1 - Bad Cross-Polarized data	nsamplpolC1.b1, nsamplpolavgC1.c1, nsamplpolavgC1.s1

DQRID : D070105.2

Start Date	Start Time	End Date	End Time
12/22/2006	1200	01/03/2007	1900

Subject:	NSA/MPL/C1 - Detector Failure
DataStreams:	nsamplpolC1.b1
Description:	Beginning 12/25, the signal return displayed serious aliasing, reflection, or ringing of the detector, with a highly repetitive pattern repeating six or more times within the lowest 15 km. On 01/02, the detector became very difficult to put into any type of operating condition. When it did operate, the "aliased" signal pattern was still present. The detector was replaced.
Measurements:	nsamplpolC1.b1: background_signal_std laser_temp energy_monitor signal_return background_signal

Back To Table of Contents

DQRID : D070122.1

Start Date	Start Time	End Date	End Time
01/03/2007	1900	01/12/2007	0130

Subject:	NSA/MPL/C1 - Missing data
DataStreams:	nsamplpolC1.b1
Description:	System was down for detector replacement.
Measurements:	nsamplpolC1.b1: base_time time laser_temp range_offset lon signal_return dead_time_corrected Pressure, associated geometric height, at altitude, NGM model output(height) range lat shots_per_avg scope_temp polarization_control_voltage Preliminary cloud base height above ground level(preliminary_cbh) alt max_altitude time_offset background_signal_std range_bin_width num_bins detector_temp pulse_rep range_bin_time polarization_control range_bins energy_monitor background_signal num_channels

Back To Table of Contents

DQRID : D070608.1

Start Date	Start Time	End Date	End Time
05/23/2007	1730	06/19/2007	1700

Subject:	NSA/MPL/C1 - No cross polarized data
DataStreams:	nsamplpolC1.b1
Description:	The cross polarizor was not functioning so there is no cross polarized data. All data during the specified period is circularly polarized.
Measurements:	nsamplpolC1.b1: signal_return

Back To Table of Contents

DQRID : D071022.3

Start Date	Start Time	End Date	End Time
05/23/2007	0330	06/19/2007	1700

Subject:	NSA/MPL/C1 - Bad Cross-Polarized data
DataStreams:	nsamplpolC1.b1, nsamplpolavgC1.c1, nsamplpolavgC1.s1
Description:	The polarizer box was not recycled when the system was rebooted; thus only circularly polarized light was being emitted. Ignore all cross polarized data.
Measurements:	nsamplpolavgC1.s1: Attenuated backscatter, cross pol(signal_return_cross_pol) background_signal_cross_pol aqc_signal_return_cross_pol Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol) background_signal_std_cross_pol polarization_control_voltage_cross_pol nsamplpolC1.b1: polarization_control_voltage signal_return nsamplpolavgC1.c1: Attenuated backscatter, cross pol(signal_return_cross_pol) polarization_control_voltage_cross_pol aqc_signal_return_cross_pol background_signal_std_cross_pol background_signal_cross_pol Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)

Back To Table of Contents

END OF DATA