Data Quality Reports for Session: 131993 User: dinghuihao Completed: 12/04/2010


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D040706.4SGP/MPL/C1 - Reduced detection sensitivitysgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
D050421.14SGP/MPL/C1 - Sensor CalibrationsgpmplC1.00, sgpmplC1.a1
D050914.3SGP/MPL/C1 - Instrument offlinesgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
D060621.2TWP/MPL/C2 - Optical throughput unacceptabletwpmplC2.00, twpmplC2.a1
D060621.3TWP/MPL/C2 - Detector on instrument failed.twpmplC2.00, twpmplC2.a1
D060621.4TWP/MPL/C2 - Missing datatwpmplC2.00, twpmplC2.a1


DQRID : D040706.4
Start DateStart TimeEnd DateEnd Time
07/01/2004150007/07/20040350
07/23/2004220009/10/20042100
Subject:
SGP/MPL/C1 - Reduced detection sensitivity
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
Description:
During the time periods indicated, the laser power supply was low.  This resulted in 
compromised detection sensitivity, particularly for thin clouds and/or during daylight hours.  
That is, some clouds may not have been identified.  The low laser power would not have 
resulted in false positives.
Measurements:sgpmplC1.a1:
  • Preliminary cloud base height(preliminary_cbh)

sgpmplnor1campC1.c1:
  • Cloud base height(cloud_base_height)
  • cloud_mask_2
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • cloud_top_attenuation_flag

sgpmplsmask1clothC1.c1:
  • MPL Cloth et al. Algorithm Significance Mask(SigniMaskMplCloth)

sgpmplcmask1clothC1.c1:
  • MPL Cloth et al. Algorithm Cloud Mask(CloudMaskMplCloth)


Back To Table of Contents

DQRID : D050421.14
Start DateStart TimeEnd DateEnd Time
11/03/2004000002/23/20052300
Subject:
SGP/MPL/C1 - Sensor Calibration
DataStreams:sgpmplC1.00, sgpmplC1.a1
Description:
The Energy Monitor records the value of the laser energy. During the time in question, the 
laser energy exceed the maximum value in the calibration table for the energy monitor. 
In other words, the value is pegged. This condition does not affect the backscatter 
signal. But it will prevent users from normalizing the backscatter signal to the laser output.
Measurements:sgpmplC1.a1:
  • energy_monitor

sgpmplC1.00:
  • Raw data stream - documentation not supported


Back To Table of Contents

DQRID : D050914.3
Start DateStart TimeEnd DateEnd Time
07/07/2004035007/23/20042150
Subject:
SGP/MPL/C1 - Instrument offline
DataStreams:sgpmplC1.a1, sgpmplnor1campC1.c1, sgpmplcmask1clothC1.c1, sgpmplsmask1clothC1.c1
Description:
Instrument was taken offline due to a failure of the laser power supply.  Data are missing 
and unrecoverable.
Measurements:sgpmplC1.a1:
  • lon
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • range_offset
  • laser_scalar_sync_offset
  • Preliminary cloud base height(preliminary_cbh)
  • filter_temp
  • trigger_freq
  • time
  • energy_monitor
  • transceiver_altitude_angle
  • voltage_15
  • voltage_10
  • pulse_rep
  • Backscatter(backscatter)
  • laser_sync_offset
  • range_bin_time
  • laser_temp
  • time_offset
  • base_time
  • scalar_sync_offset
  • instrument_temp
  • total_counts
  • background_signal
  • lat
  • range
  • shots_sum
  • voltage_05
  • max_altitude
  • range_bins
  • detector_temp
  • shots_summed
  • deadtime_correction
  • alt
  • property
  • range_bin_width
  • transceiver_azimuth_angle

sgpmplnor1campC1.c1:
  • background_signal
  • energy_monitor
  • alt
  • Cloud base height(cloud_base_height)
  • cloud_top_attenuation_flag
  • Backscatter(backscatter)
  • lon
  • baseline_update_time
  • detector_temp
  • cloud_mask_2
  • random_error
  • cloud_mask_1
  • Cloud top height(cloud_top_height)
  • pulse_rep
  • time_offset
  • shots_summed
  • lat
  • instrument_temp
  • base_time
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • laser_temp

sgpmplsmask1clothC1.c1:
  • time_offset
  • MPL Cloth et al. Algorithm Significance Mask(SigniMaskMplCloth)
  • Heights
  • base_time

sgpmplcmask1clothC1.c1:
  • time_offset
  • base_time
  • Heights
  • MPL Cloth et al. Algorithm Cloud Mask(CloudMaskMplCloth)


Back To Table of Contents

DQRID : D060621.2
Start DateStart TimeEnd DateEnd Time
02/01/2003000011/12/20041900
Subject:
TWP/MPL/C2 - Optical throughput unacceptable
DataStreams:twpmplC2.00, twpmplC2.a1
Description:
The optical throughput of the MPL at Nauru is below an acceptable level. Despite an 
extended stay to address the problem in Feb 2003, the problem was unresolved.  An additional 
repair was attempted in July 2003 with no significant success.  Several optical components 
were replaced and the system was repeatedly re-aligned.  

The system appears to have been properly collimated as the shape of the signal is 
appropriate for both near and far range.  The magnitude of the signal was simply too low.  This 
signal decrease was apparent in ambient background values as well as from atmospheric 
signal, so the impact on data quality was not as severe as might otherwise be the case.  The 
MPL was still capable of detecting high altitude cirrus (day and night) but the 
sensitivity was reduced.
Measurements:twpmplC2.a1:
  • detector_counts

twpmplC2.00:
  • Raw data stream - documentation not supported


Back To Table of Contents

DQRID : D060621.3
Start DateStart TimeEnd DateEnd Time
11/12/2004190012/14/20042330
Subject:
TWP/MPL/C2 - Detector on instrument failed.
DataStreams:twpmplC2.00, twpmplC2.a1
Description:
The detector on the MPL failed. The result are zeros for the detector counts data.
Measurements:twpmplC2.a1:
  • detector_counts

twpmplC2.00:
  • Raw data stream - documentation not supported


Back To Table of Contents

DQRID : D060621.4
Start DateStart TimeEnd DateEnd Time
12/14/2004233002/01/20052130
Subject:
TWP/MPL/C2 - Missing data
DataStreams:twpmplC2.00, twpmplC2.a1
Description:
The MPL was turned off due to a dead detector.
Measurements:twpmplC2.a1:
  • range_bin_time
  • time
  • pulse_rep
  • total_counts
  • voltage_05
  • lon
  • energy_monitor
  • transceiver_altitude_angle
  • base_time
  • range_offset
  • Preliminary cloud base height(preliminary_cbh)
  • detector_counts
  • property
  • alt
  • assumed_zero_range_bin
  • laser_temp
  • scalar_sync_offset
  • shots_summed
  • shots_sum
  • background_signal
  • instrument_temp
  • range
  • time_offset
  • Pressure, associated geometric height, at altitude, NGM model output(height)
  • lat
  • voltage_15
  • Backscatter(backscatter)
  • range_bin_width
  • voltage_10
  • filter_temp
  • laser_scalar_sync_offset
  • max_altitude
  • trigger_freq
  • transceiver_azimuth_angle
  • detector_temp
  • laser_sync_offset
  • deadtime_correction
  • range_bins

twpmplC2.00:
  • Raw data stream - documentation not supported


Back To Table of Contents



END OF DATA