| DQR ID | Subject | Data Streams Affected |
|---|---|---|
| D970111.1 | Incorrect surface temperature | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
| D970318.2 | Questionable RH | sgpsondewrpnC1.a1 |
| D970507.2 | Jump in pressure value | sgpsondewrpnC1.a1 |
| D970624.2 | Incorrect surface values | sgpsondewrpnC1.a1 |
| D970625.1 | Bad sounding file CF 970622:0228 | sgpsondewrpnC1.a1 |
| D970709.1 | Bad pressure values CF sounding 970704:0525 | sgpsondewrpnC1.a1 |
| D970923.2 | Pressure jump at launch | sgpsondewrpnC1.a1 |
| D980126.1 | Incorrect radiosonde serial numbers | sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.a0, sgpsondewrpnB4.a1, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 01/10/1997 | 1730 | 01/10/1997 | 1730 |
| Subject: | Incorrect surface temperature |
| DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
| Description: | DQR No: Platform: sgpsondeC1
Subject: Incorrect surface temperature: sounding C1 01/10/97:1730
Date Submitted: 1/11/97
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
_X_ Other - Site Ops
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 01/10/97 Time 17:30 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The site operator noted that the surface temperature for the subject sounding
was entered incorrectly. The value entered was -3.3 degC; the correct value
should be -6.3 degC. This is a fairly benign error, only the surface values
will be affected.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
| Measurements: | sgpsondewrpnC1.a1:
sgpsondewrpnC1.a0:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 03/07/1997 | 1427 | 03/07/1997 | 1427 |
| Subject: | Questionable RH |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | DQR No: Platform: sgpsondeC1
Subject: Questionable RH: sounding C1 03/07/97:1427
Date Submitted: 3/18/97
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other - Site Ops
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1.A1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 03/07/97 Time 14:27 (GMT)
End Date Time (GMT)
Data should be labeled:
_X__ questionable _?_ All data fields affected
_X__ incorrect _X_ Only some data fields affected
_?_ wrong calibration
___ others
Discussion of Problem:
David Cook pointed out that the RH values for the subject sounding disagree
substantially with values reported at the 60m tower. Review of the sounding
data shows saturation (100%) values reported at the surface and during
most of the sounding. The site ops log shows RH values of between 68% (1400)
and 52% (1500) at the surface. Surface temperature (8.4) and pressure (983.0)
obtained from the sonde are not substantially different from the surface
observations (7.8/10.8) and (982.7/982.4) at 1400 and 1500 respectively, so
it is unlikely that an incorrect calibration tape was used for the sonde.
I think the conclusion must be that the RH sensor on this sonde was bad.
As an operational issue, this sonde should have been rejected by site ops
because the surface RH value of 100% is more than 7% different than the surface
value obtained from an independent reference instrument. I will check the
procedures that I have provided to site ops to be sure that I included this
criterion.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 05/05/1997 | 1732 | 05/05/1997 | 1732 |
| Subject: | Jump in pressure value |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | DQR No: Platform: sgpsondeC1
Subject: Jump in pressure value C1 sounding 970505.1732
Date Submitted: 5/06/97
Submitted By: Barry Lesht _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnc1/ (alt, asc, press)
What level data: (raw,a0,a1,b1,c1 etc): all
What location was the data collected at: SGP/CF
Period of time in question
Begin Date 5/05/97 Time 17:32 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable _X_ All data fields affected
_X_ incorrect ___ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The first pressure value reported by the radiosonde (t = 2 sec) is
974.9. The surface pressure value was 980.9 hPa. This difference
is somewhat greater than the expected (normal) change and may mean that
either the pressure sensor was jarred during launch or the system
mis-identified the actual launch start time. Further clarification requires
analysis of the raw data which will take some time. The altitude values
for this sounding will be incorrect. The ascent rate values during the
first 30 seconds also will be wrong. Because the system will reject
samples with out of bound ascent rates (i.e., during the first 30 seconds),
the temperature and rh values also will be incorrect (result of
interpolation). Relative height values after 30 seconds should be okay.
Other observations/measurements impacted by this problem:
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 06/21/1997 | 2027 | 06/21/1997 | 2027 |
| Subject: | Incorrect surface values |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | DQR No: Platform: sgpsondeC1
Subject: Incorrect surface values sounding 970621:2027
Date Submitted: 6/23/97
Submitted By: Barry Lesht _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnc1
What level data: (raw,a0,a1,b1,c1 etc): all
What location was the data collected at: SGP/CF
Period of time in question
Begin Date 6/21/97 Time 20:27 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
Site operations reports that incorrect surface values were entered into
the subject sounding. Instead of 972.3, 33.7, and 46 the surface pressure,
temperature, and humidity values should have been 971.8, 33.3, and 47.
The incorrect surface pressure will result in incorrect altitudes throughout
the profile and incorrect ascent rate values during the first 30 seconds.
The effects of the incorrect temperature and relative humidty values should
be negligable.
Other observations/measurements impacted by this problem:
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 06/22/1997 | 0228 | 06/22/1997 | 0236 |
| Subject: | Bad sounding file CF 970622:0228 |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | It appears that there was a problem with the radiosonde that generated this short file. The pressure values are unreasonably high and the file terminated after only 484 seconds of flight. I note that the operators started a new sounding at 0252. This entire file should be disregarded or deleted. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 07/04/1997 | 0525 | 07/04/1997 | 0630 |
| Subject: | Bad pressure values CF sounding 970704:0525 |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | The pressure values and hence altitude values are most likely incorrect in this sounding. It also appears that an incorrect surface pressure value was entered by the operator. The surface pressure value in the data (986.8) is somewhat higher than the surface pressures for the neighboring soundings and higher than recorded in the raw data collected before launch (~978 hPa). The first pressure value recorded by the sonde after launch is 884.8 hPa. Analysis of the absolutely raw data reveals that the sonde was reading about 978 hPa well before launch, then suddenly dropped to 886.8 at which it remained stable for several minutes, then began slowly decreasing as would be expected after launch. My best guess is that the sonde was somehow damaged during handling before launch resulting in erroneous pressure values. Relative pressure changes from an 'apparent' surface value of 886.8 hPa may be correct, but the absolute pressure values are not. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 09/21/1997 | 0530 | 09/21/1997 | 0530 |
| Subject: | Pressure jump at launch |
| DataStreams: | sgpsondewrpnC1.a1 |
| Description: | The difference between the first pressure value recorded by the radiosonde after launch (984.5) that the surface value entered by the operator (989.3) is somewhat larger than would normally be expected. This will result in incorrect altitude values throughout the sounding. The ascent rates during the first 30 seconds also will be incorrect. |
| Measurements: | sgpsondewrpnC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 01/01/1998 | 0000 | 12/31/1999 | 2359 |
| Subject: | Incorrect radiosonde serial numbers |
| DataStreams: | sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.a0, sgpsondewrpnB4.a1, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
| Description: | Radiosondes manufactured at Vaisala's Woburn, MA factory during the first of January 1998 have incorrect serial numbers. Instead of being numbered 8012XXXXX these sondes are numbered 7012XXXXX. Vaisala has been informed of this, has confirmed the problem, and has corrected their numbering for all subsequent sondes. 163 incorrectly numbered sondes were shipped to ARM on 1/9/98. Some have been used at the CF since 1/19/98:1430. |
| Measurements: | sgpsondewrpnB4.a0:
sgpsondewrpnB5.a0:
sgpsondewrpnB5.a1:
sgpsondewrpnB4.a1:
sgpsondewrpnB1.a1:
sgpsondewrpnB1.a0:
sgpsondewrpnB6.a0:
sgpsondewrpnC1.a1:
sgpsondewrpnC1.a0:
sgpsondewrpnB6.a1:
|