SGP/EBBR/E13 - Sensible and Latent Heat Fluxes Incorrect (AEM failure)

The AEM was stuck in the home 30 position most of this period.

Therefore, the sensible and latent heat fluxes are incorrect during most of this period.

• temp_air_right
• temp_air_left

• temp_air_top
• temp_air_bottom
• temp_trh_bottom
• vapor_pressure_top
• temp_trh_top
• vapor_pressure_bottom

• Heat flux, sensible, at 1.5-m height, 30-min intervals(sensible_heat_flux)
• bowen_ratio
• temp_trh_top
• rh_bottom_fraction
• vapor_pressure_top
• Heat flux, latent, at 1.5-m height, 30-min intervals(latent_heat_flux)
• vapor_pressure_bottom
• temp_air_bottom
• temp_trh_bottom
• rh_top_fraction
• temp_air_top

SGP/EBBR/E13 - metadata corrections

On 20050723, a series of metadata corrections and additions were completed.  These 
metadata changes apply to all EBBR.E13 data collected by ARM back to the installation of the 
instrument in September 1992.  Please see the current metadata for correct information.  
These changes do not affect data values or quality.

The changes are summarized below:
1) Update of "sensor location" information
2) Addition of installation dates for systems
3) Correction of soil type
4) Correction of soil moisture units (from "by volume" to "gravimetric")

• base_time

• base_time

• base_time

SGP/SONDE/C1 - Increased precision for alt, dp, pres, rh, tdry

The output precision of the following variables was increased 20060928

alt  changed from 1m to 0.1m
dp   changed from 0.1degC to 0.01degC
pres changed from 0.1 hPa to 0.01 hPa
RH   changed from 1%RH to 0.01%RH
tdry changed from .1degC to 0.01degC

Note that the increase in precision does not necessarily imply an increase in accuracy.  
Users are cautioned to continue to use their best scientific judgement when using these or 
any other data.

• alt
• Dry Bulb Temperature(tdry)
• Dewpoint Temperature(dp)
• Humidity, relative(rh)
• Pressure, atmospheric, constant value of model level, RUC model output(pres)