• Voltage level which operates the A_D card and the detector(voltage_5)
• Laser Temperature(laser_temp)
• Voltage level which operates the thermistor(voltage_10)
• Preliminary cloud base height above ground level(cbh)
• Aerosol backscatter coefficient at 355 nm(backscatter)
• Number of laser shots recorded(shots_summed)
• Background Signal(background_signal)
• Instrument Temperature(instrument_temp)
• Filter Temperature(filter_temp)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Detector Temperature(detector_temp)
• base time(base_time)
• Laser output energy per pulse(energy_monitor)
• Dummy altitude for Zeb(alt)
• Voltage level which operates the energy monitor(voltage_15)
• GPS raw data filename(filename)
• lon(lon)
• lat(lat)
• Time offset of tweaks from base_time(time_offset)

TWP/MPL/C1 - Missing data

Data are missing and unrecoverable.

• Laser Temperature(laser_temp)
• Aerosol backscatter coefficient at 355 nm(backscatter)
• Background Signal(background_signal)
• Filter Temperature(filter_temp)
• Angle of orientation with respect to true geographic north(tranceiver_azimuth_angle)
• Detector Temperature(detector_temp)
• Array of heights for the range gates(height)
• range(range)
• Dummy altitude for Zeb(alt)
• required to correct raw counts for detector deadtime prior to all other
  corrections.(deadtime_correction)
• time(time)
• Amount of time the actual laser pulse lags behind the sync trigger(laser_sync_offset)
• GPS raw data filename(filename)
• Sum of raw backscatter counts per bin prior to ANY corrections.(total_counts)
• lon(lon)
• Attenuated backscatter(detector_counts)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Repetition rate, or Trigger Frequency of the laser(trigger_freq)
• Time offset of tweaks from base_time(time_offset)
• Voltage level which operates the A_D card and the detector(voltage_5)
• Voltage level which operates the thermistor(voltage_10)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Preliminary cloud base height above ground level(cbh)
• Assumed zero-range bin number\(assumed_zero_range_bin)
• Number of laser shots recorded(shots_summed)
• Instrument Temperature(instrument_temp)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
• base time(base_time)
• Preliminary cloud base height(preliminary_cbh)
• Laser output energy per pulse(energy_monitor)
• Amount of time the scalar lags behind the sync trigger(scalar_sync_offset)
• Voltage level which operates the energy monitor(voltage_15)
• value represents date of last configuration change as yyyymmdd(property)
• Angle of inclination with respect to horizontal(tranceiver_altitude_angle)
• Amount of time laser pulse lags behind the scalar trigger(laser_scalar_sync_offset)
• lat(lat)
• Voltage level which operates the A/D card and the detector(voltage_05)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
• Number of laser pulses summed during measurement interval(shots_sum)

TWP/C1 - Incorrect elevation reported in Manus Data

Bill Clements reports we have been using 6m MSL as the station elevation of Momote 
(Manus).  This was based on information posted near the station barometer in the Momote Weather 
Service Office.  It turns out that the official WMO station elevation for Momote is 4m 
MSL and the upper air elevation is 5m MSL.

All Manus instruments except the sonde station are at 4m MSL. The sonde launching station 
is at 5m MSL.

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)