SGP/RWP/C1 - Reprocess: Instrument in non-standard mode for IOP

The SGP.C1 915RWP was operated in a non-standard mode during the Nocturnal
Flux IOP (approximately the month of September). The profiler was placed into a constant 
high temporal and spatial resolution mode rather than alternating between modes as it does 
routinely. 30 min averages were produced (usually 60 min) at a 60 m gate resolution for 
both winds and RASS. 

Data were processed and archived, but the processing algorithm interpreted this data as 2 
different power levels per hourly sample rather than 30 minute samples at the same power 
level.  Data will be reprocessed.

• Vertical wind velocity(vert_v)
• Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
• Average Interval(avgint)
• Array of heights for the range gates(height)
• Number of Values that Passed Consensus, Corrected Beam 0 Virtual Temperature(ncns_virtual_temp_corr)
• virtual_temp_corr(virtual_temp_corr)
• Sample Rate(sampr)
• Beam 0 virtual temperature(virtual_temp)
• Number of Values that Passed Consensus, Beam 0 Virtual Temperature(ncns_virtual_temp)
• Time offset of tweaks from base_time(time_offset)
• lon(lon)
• Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
• lat(lat)
• Range Gate Spacing(rgs)
• Dummy altitude for Zeb(alt)
• Number of pulses/ave int, Beam 0(nrec)
• Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
• base time(base_time)
• Number of Values Required for Consensus, Beam 0(nrcns)
• Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)

• Array of heights for each sample time(height_p)
• Time Domain Integration Time(tditime)
• copolar signal to noise ratio(snr1)
• Signal to Noise Ratio, Beam 4(snr4)
• Number of spectra/ave int, Beam 0(nrec0)
• Range Gate Spacing(rgs)
• Beam 2 radial wind speed(vel2)
• Number of spectra/ave int, Beam 2(nrec2)
• Number of Values Required for Consensus, Beam 0(nrcns0)
• Beam 3 radial wind speed(vel3)
• Number of Values Required for Consensus, Beam 4(nrcns4)
• Signal to Noise Ratio, Beam 0(snr0)
• Beam 1 radial wind speed(vel1)
• Number of Coherent Samples/spectral point(ncoh)
• Azimuth of Beam 2(azimuth2)
• Number of Pulse Code Bits(pcbits)
• base time(base_time)
• Azimuth of Beam 3 for WINDS data(azimuth3)
• Number of valid heights(nheight)
• Azimuth of Beam 4 for WINDS data(azimuth4)
• Rx Bandwidth Switch Code(bswitch)
• Number of spectra/ave int, Beam 3(nrec3)
• Azimuth of Beam 0(azimuth0)
• Height Index(range_gate)
• Number of spectra/ave int, Beam 4(nrec4)
• Number of Values Required for Consensus, Beam 1(nrcns1)
• U-component(u_wind)
• Sample Rate(sampr)
• Elevation angle of Beam 0 for WINDS data(elevation0)
• Pulse Repetition Frequency(prf)
• Elevation angle of Beam 3 for WINDS data(elevation3)
• Number of Values Required for Consensus, Beam 2(nrcns2)
• V-component(v_wind)
• Number of values that passed consensus, beam 2(ncns2)
• Oblique FFT Bandwidth(oband)
• Ave Time per Average Spectra.(spcavetim)
• Horizontal wind direction(dir)
• Number of Individual Spectra/Average Spectrum(nspc)
• Number of values that passed consensus, beam 4(ncns4)
• Number of Values Required for Consensus, Beam 3(nrcns3)
• Dummy altitude for Zeb(alt)
• lon(lon)
• Height of Center of First Range Gate(rgf)
• Beam 0 radial wind speed(vel0)
• Interpulse Period(ipp)
• Oblique Velocity Spectral Resolution(ovsr)
• Elevation angle of Beam 2 for WINDS data(elevation2)
• Elevation angle of Beam 4 for WINDS data(elevation4)
• Horizontal wind speed(spd)
• Number of values that passed consensus, beam 0(ncns0)
• Vertical Velocity Spectral Resolution(vvsr)
• Delay Time to 1st Gate(dly)
• Azimuth of Beam 1(azimuth1)
• lat(lat)
• Pulse Length(plen)
• Height of Center of Last Range Gate(rgl)
• Vertical FFT Bandwidth(vband)
• Number of spectra/ave int, Beam 1(nrec1)
• Beam 4 radial wind speed(vel4)
• Number of values that passed consensus, beam 3(ncns3)
• Average Interval(avgint)
• Elevation angle of Beam 1 for WINDS data(elevation1)
• Time offset of tweaks from base_time(time_offset)
• Power offset(power)
• Signal to Noise Ratio, Beam 3(snr3)
• Ave snr*10 level, Beam 2(snr2)
• Individual Spectrum Integration Time(sitime)
• Number of values that passed consensus, beam 1(ncns1)

• Spectral Data (signal strength/freq int)(spc_amp)
• lat(lat)
• Range Gate Spacing(rgs)
• Array of heights for the range gates(height)
• lon(lon)
• Particle radius at logarithmic center of bin(bins)
• Time offset of tweaks from base_time(time_offset)
• Sample Rate(sampr)
• Dummy altitude for Zeb(alt)
• base time(base_time)

• base time(base_time)
• 1000 * log10(noise signal level: vert vel)(noise)
• Signal to Noise Ratio: acoustic(ssnr)
• lat(lat)
• Beam 0 virtual temperature(virtual_temp)
• Sample Rate(sampr)
• Acoustic Spectral Width(sspecw)
• lon(lon)
• Array of heights for the range gates(height)
• Time offset of tweaks from base_time(time_offset)
• Range Gate Spacing(rgs)
• Mean atmospheric vertical velocity(mdf)
• Mean acoustic speed(smdf)
• Spectral Width: vert velocity(specw)
• Dummy altitude for Zeb(alt)
• Signal to Noise Ratio of the RASS Signal(snr)

• Pulse Length(plen)
• Number of Coherent Samples/spectral point(ncoh)
• 1000 * log10(noise signal level: vert vel)(noise)
• Sample Rate(sampr)
• Number of valid heights(nheight)
• Vertical FFT Bandwidth(vband)
• Individual Spectrum Integration Time(sitime)
• Number of Individual Spectra/Average Spectrum(nspc)
• Interpulse Period(ipp)
• Beam Number(beam)
• Signal to Noise Ratio of the RASS Signal(snr)
• lat(lat)
• Time offset of tweaks from base_time(time_offset)
• Array of heights for each sample time(height_t)
• base time(base_time)
• Time Domain Integration Time(tditime)
• Pulse Repetition Frequency(prf)
• Height Index(range_gate)
• Spectral Width: vert velocity(specw)
• Height of Center of Last Range Gate(rgl)
• lon(lon)
• Mean atmospheric vertical velocity(mdf)
• Number of Pulse Code Bits(pcbits)
• Radial Velocity Spectral Resolution(vsr)
• Oblique FFT Bandwidth(oband)
• Delay Time to 1st Gate(dly)
• elevation(elevation)
• Height of Center of First Range Gate(rgf)
• Range Gate Spacing(rgs)
• Dummy altitude for Zeb(alt)
• Ave Time per Average Spectra. Also known as dwell.(spcavetime)
• Rx Bandwidth Switch Code(bswitch)

• Ave Time per Average Spectra.(spcavetim)
• Time Domain Integration Time(tditime)
• Time offset of tweaks from base_time(time_offset)
• lon(lon)
• Beam Number(beam)
• Number of Individual Spectra/Average Spectrum(nspc)
• Height of Center of First Range Gate(rgf)
• Pulse Repetition Frequency(prf)
• Individual Spectrum Integration Time(sitime)
• Sample Rate(sampr)
• base time(base_time)
• Dummy altitude for Zeb(alt)
• Radial Velocity Spectral Resolution(vsr)
• Number of Coherent Samples/spectral point(ncoh)
• Vertical FFT Bandwidth(vband)
• Height Index(range_gate)
• Spectral Data (signal strength/freq int)(spc_amp)
• Array of heights for each sample time(height_t)
• Rx Bandwidth Switch Code(bswitch)
• elevation(elevation)
• Height of Center of Last Range Gate(rgl)
• Range Gate Spacing(rgs)
• Oblique FFT Bandwidth(oband)
• lat(lat)
• Pulse Length(plen)
• Number of valid heights(nheight)
• Delay Time to 1st Gate(dly)
• Number of Pulse Code Bits(pcbits)
• Particle radius at logarithmic center of bin(bins)
• Interpulse Period(ipp)