HFE/MWRHF/M1 - Calibration updates

The MWRHF calibration algorithm updates the calibration parameters every time a new 
successful tip curve is acquired. 

This results in small jumps (1-2 K) in the brightness temperatures each time calibration 
is updated. During times of frequent calibrations the data appear discontinuous with short 
data segments interrupted by small jumps.

• Sky brightness temperature (150 GHz)(tbsky150)
• Sky brightness temperature (90 GHz)(tbsky90)

HFE/MWRHF/M1 - Rain sensor failure

The rain sensor failed and the rain flag was always on.  When the rain flag is on the 
radiometer does not perform tip curves. The rain sensor was replaced 8/4.

• Rain flag(rain_flag)

HFE/MWRP/M1 - Reprocess: Bias in LWP retrievals

Since local radiosondes were not available, radiosondes from a different site were used to 
develop retrieval coefficients. LWP retrievals are biased in the summer months 
(June-September).  Data in May and December are not affected.

Additional analysis will be conducted to derive new retrieval coefficients and the data 
will be reprocessed.

• Retrieved liquid water path(liquidWaterPath)
• Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)