Data Quality Reports for Session: 121047 User: vermeesch Completed: 07/27/2009


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D050928.3NSA/MWR/C1 - New software version (4.15) installednsamwrlosC1.b1, nsamwrtipC1.a1
D050930.1NSA/MWR/C1 - Reprocess: wrong calibrationnsamwrlosC1.a1, nsamwrlosC1.b1, nsamwrtipC1.a1


DQRID : D050928.3
Start DateStart TimeEnd DateEnd Time
09/16/2002182009/15/20051702
Subject:
NSA/MWR/C1 - New software version (4.15) installed
DataStreams:nsamwrlosC1.b1, nsamwrtipC1.a1
Description:
A problem began with the installation of MWR.EXE version 4.12 in September 2002. The 
software had been upgraded from a "DOS" to a "Windows"-compiled program to address an earlier 
problem.  The software upgrade corrected the earlier problem but introduced a new one 
that caused line-of-sight observing cycles to be skipped, a 15% reduction in the number of 
tip curves, and saturation of CPU usage.  Software versions 4.13 and 4.14 also produced 
these problems.

The new MWR software version (4.15) was installed on 9/15/2005. As a consequence of this 
upgrade, the tip curve frequency increased. The tip cycle time decreased from ~60s to ~50s.
Measurements:nsamwrlosC1.b1:
  • Blackbody kinetic temperature(tkbb)
  • 31.4 GHz blackbody(bb31)
  • MWR column precipitable water vapor(vap)
  • Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
  • 23.8 GHz Blackbody signal(bb23)
  • 31.4 GHz blac2body+noise injection signal(bbn31)
  • Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
  • 31.4 GHz sky signal(sky31)
  • Sky Infra-Red Temperature(sky_ir_temp)
  • 23.8 GHz blackbody+noise injection signal(bbn23)
  • Averaged total liquid water along LOS path(liq)
  • Sky brightness temperature at 31.4 GHz(tbsky31)
  • Mixer kinetic (physical) temperature(tkxc)
  • Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
  • (tknd)
  • 23.8 GHz sky signal(sky23)
  • Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
  • IR Brightness Temperature(ir_temp)
  • Sky brightness temperature at 23.8 GHz(tbsky23)
  • Ambient temperature(tkair)
  • Temperature correction coefficient at 31.4 GHz(tc31)
  • Temperature correction coefficient at 23.8 GHz(tc23)

nsamwrtipC1.a1:
  • Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
  • Temperature correction coefficient at 31.4 GHz(tc31)
  • (tknd)
  • 23.8 GHz sky signal(tipsky23)
  • Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
  • 31.4 GHz goodness-of-fit coefficient(r31)
  • Mixer kinetic (physical) temperature(tkxc)
  • 23.8 GHz sky brightness temperature derived from tip curve(tbskytip23)
  • Ambient temperature(tkair)
  • 31.4 GHz sky signal(tipsky31)
  • Noise injection temp at 23.8 GHz derived from this tip(tnd23I)
  • Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
  • Total liquid water along zenith path using tip-derived brightness temperatures(liqtip)
  • Noise injection temp at 31.4 GHz derived from this tip(tnd31I)
  • Temperature correction coefficient at 23.8 GHz(tc23)
  • Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
  • 31.4 GHz blackbody(bb31)
  • 23.8 GHz Blackbody signal(bb23)
  • 31.8 GHz sky brightness temperature derived from tip curve(tbskytip31)
  • 23.8 GHz goodness-of-fit coefficient(r23)
  • Total water vapor along zenith path using tip-derived brightness temperatures(vaptip)
  • Blackbody kinetic temperature(tkbb)
  • 31.4 GHz blac2body+noise injection signal(bbn31)
  • 23.8 GHz blackbody+noise injection signal(bbn23)


Back To Table of Contents

DQRID : D050930.1
Start DateStart TimeEnd DateEnd Time
09/01/2005194509/06/20051500
Subject:
NSA/MWR/C1 - Reprocess: wrong calibration
DataStreams:nsamwrlosC1.a1, nsamwrlosC1.b1, nsamwrtipC1.a1
Description:
When MWR#20 was returned to service on 9/1/2005, the calibration had changed as a result 
of the repairs made by Radiometrics and the RF deck temperature had been set to 325K for 
testing. On 9/2, the temperature was decreased to 307K to prevent thermal instability in 
winter and the calibration was changed in the configuration file with the values supplied 
on the repair report.  

The data need to be reprocessed with the calibration coefficients that were automatically 
derived after these changes were put into affect. They are: tnd_nom23=185.621, 
tnd_nom31=158.801, tc23=-0.022, tc31=-0.039.
Measurements:nsamwrlosC1.a1:
  • MWR column precipitable water vapor(vap)
  • Sky brightness temperature at 31.4 GHz(tbsky31)
  • Averaged total liquid water along LOS path(liq)
  • Sky brightness temperature at 23.8 GHz(tbsky23)

nsamwrlosC1.b1:
  • Sky brightness temperature at 23.8 GHz(tbsky23)
  • MWR column precipitable water vapor(vap)
  • Averaged total liquid water along LOS path(liq)
  • Sky brightness temperature at 31.4 GHz(tbsky31)

nsamwrtipC1.a1:
  • 31.8 GHz sky brightness temperature derived from tip curve(tbskytip31)
  • 23.8 GHz sky brightness temperature derived from tip curve(tbskytip23)
  • Total water vapor along zenith path using tip-derived brightness temperatures(vaptip)
  • Total liquid water along zenith path using tip-derived brightness temperatures(liqtip)


Back To Table of Contents



END OF DATA