Data Quality Reports for Session: 120380 User: thornpig Completed: 06/19/2009

TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D001218.1SGP/SONDE/B1 - Incorrect surface temperaturesgpsondewnpnB1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1
D001221.3SGP/SONDE/B1 - Bad sounding data (incorrect calibration?)sgpsondewnpnB1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1
D021110.2SGP/SONDE/B4 - Soundings contaminated by interferencesgplssondeB4.c1, sgpqmemwrcolB4.c1, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
D021112.2SGP/SONDE/B4 - Possible interference in B4 sounding 20021110.1729sgpsondeB4.00, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
D021117.2SGP/SONDE/B4 - B4 sounding contaminated by interferencesgpsondeB4.00, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
D021121.2SGP/SONDE/B1 - Temperature sensor failedsgpsondewnpnB1.a1, sgpsondewnpnB1.b1
D990124.2SGP/SONDE - Dry bias in sonde RHDsgpsondeB1.00, DsgpsondeB1.a0, DsgpsondeB1.a1, DsgpsondeB4.00, DsgpsondeB4.a0,
DsgpsondeB4.a1, DsgpsondeB5.00, DsgpsondeB5.a0, DsgpsondeB5.a1, DsgpsondeC1.00, DsgpsondeC1.a0,
DsgpsondeC1.a1, DsgpsondenogcptucalcB1.c1, DsgpsondenogcptucalcB4.c1,
DsgpsondenogcptucalcB5.c1, DsgpsondenogcptucalcC1.c1, DsgpsondenogcwrpnB1.c1, DsgpsondenogcwrpnB4.c1,
DsgpsondenogcwrpnB5.c1, DsgpsondenogcwrpnC1.c1, DsgpsondeptuB1.00, DsgpsondeptuB4.00,
DsgpsondeptuB5.00, DsgpsondeptuB6.00, DsgpsondeptuC1.00, DsgpsondeptucalcB1.c1,
DsgpsondeptucalcB4.c1, DsgpsondeptucalcB5.c1, DsgpsondeptucalcC1.c1, sgpsondeB1.00,
sgpsondeB1.a0, sgpsondeB1.a1, sgpsondeB4.00, sgpsondeB4.a0, sgpsondeB4.a1, sgpsondeB5.00,
sgpsondeB5.a0, sgpsondeB5.a1, sgpsondeB6.00, sgpsondeC1.00, sgpsondeC1.a0, sgpsondeC1.a1,
sgpsondeptuC1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1, sgpsondewnpnB4.a0,
sgpsondewnpnB4.a1, sgpsondewnpnB5.a0, sgpsondewnpnB5.a1, sgpsondewnpnB6.a0, sgpsondewnpnB6.a1,
sgpsondewnpnC1.a0, sgpsondewnpnC1.a1, sgpsondewnprC1.a0, sgpsondewnprC1.a1,
sgpsondewrpnB1.00, sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.00, sgpsondewrpnB4.a0,
sgpsondewrpnB4.a1, sgpsondewrpnB5.00, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1,
sgpsondewrpnB6.00, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.00, sgpsondewrpnC1.a0,
sgpsondewrpnC1.a1, sgpsondewrprB1.00, sgpsondewrprB1.a0, sgpsondewrprB1.a1,
sgpsondewrprB4.00, sgpsondewrprB4.a0, sgpsondewrprB4.a1, sgpsondewrprB5.00, sgpsondewrprB5.a0,
sgpsondewrprB5.a1, sgpsondewrprC1.00, sgpsondewrprC1.a0, sgpsondewrprC1.a1


DQRID : D001218.1
Start DateStart TimeEnd DateEnd Time
12/12/2000233012/12/20002330
Subject:
SGP/SONDE/B1 - Incorrect surface temperature
DataStreams:sgpsondewnpnB1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1
Description:
The operator entered 8.1 degC as the surface temperature for this sounding instead of -8.1 
degC.  This is the only value affected.
Measurements:sgpsondewnpnB1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnB1.a0:
  • Dry bulb temperature(tdry)
sgpsondewnpnB1.a1:
  • Dry bulb temperature(tdry)

Back To Table of Contents

DQRID : D001221.3
Start DateStart TimeEnd DateEnd Time
12/16/2000143012/16/20001700
Subject:
SGP/SONDE/B1 - Bad sounding data (incorrect calibration?)
DataStreams:sgpsondewnpnB1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1
Description:
I'm not sure what happened here but the temperature data for this sounding
clearly are wrong.  Along with the missing humidity data and the problems
the operator reported with his previous sounding it looks as if all the data
in this file are bad.  It may be that the sensor was damaged at launch (it
was very windy).
Measurements:sgpsondewnpnB1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnB1.a0:
  • lon(lon)
  • Ascent Rate(asc)
  • Time offset of tweaks from base_time(time_offset)
  • Dry bulb temperature(tdry)
  • Surface dew point temperature(dp)
  • lat(lat)
  • Dummy altitude for Zeb(alt)
  • Mean Wind Speed(wspd)
  • Relative humidity inside the instrument enclosure(rh)
  • Wind Status(wstat)
  • Retrieved pressure profile(pres)
  • base time(base_time)
  • Wind Direction(deg)
sgpsondewnpnB1.a1:
  • Surface dew point temperature(dp)
  • Wind Status(wstat)
  • lon(lon)
  • Retrieved pressure profile(pres)
  • V-component(v_wind)
  • Time offset of tweaks from base_time(time_offset)
  • Relative humidity inside the instrument enclosure(rh)
  • Dummy altitude for Zeb(alt)
  • Mean Wind Speed(wspd)
  • Dry bulb temperature(tdry)
  • base time(base_time)
  • lat(lat)
  • Wind Direction(deg)
  • Ascent Rate(asc)
  • U-component(u_wind)

Back To Table of Contents

DQRID : D021110.2
Start DateStart TimeEnd DateEnd Time
11/07/2002113011/07/20021316
11/07/2002142911/07/20021629
11/07/2002173011/07/20021930
11/07/2002202911/07/20022239
11/07/2002233111/08/20020131
Subject:
SGP/SONDE/B4 - Soundings contaminated by interference
DataStreams:sgplssondeB4.c1, sgpqmemwrcolB4.c1, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
Description:
These five soundings, done in succession on 11/07/2002 as part of the SCM/IOP are 
contaminated by interference.  I can't tell whether the problem has to do with improper tuning of 
the radiosondes, inadequate frequency separation among radiosondes launched from 
different locations, or some other operator problem.  I suspect that there is an operator 
component to the difficulty because the surface pressure is given as an unreasonably low 896.6 
hPa on the 1730 sounding and 886.1 hPa on the 2331 sounding.  This may indicate that the 
ground station was locked another station's radiosonde rather than on the B4 radiosonde.
Measurements:sgplssondeB4.c1:
  • Relative humidity inside the instrument enclosure(rh)
  • lon(lon)
  • Retrieved pressure profile(pres)
  • lat(lat)
  • Dry bulb temperature(tdry)
  • Dummy altitude for Zeb(alt)
sgpqmemwrcolB4.c1:
  • maximum height attained by the balloon in pressure units(max_height_sonde)
  • MWR IPM output for 23.8 GHz sky brightness temperature using sonde T,P,RH(model_tbsky23)
  • Integrated vapor column from sonde using MWR Instrument Performance Model (IPM)(integ_vap_sonde)
  • MWR IPM output for atmospheric mean radiating temp using sonde T,P,RH(model_tmr31)
  • MWR IPM output for 31.4 GHz sky brightness temperature using sonde T,P,RH(model_tbsky31)
  • MWR IPM output for atmospheric mean radiating temp using sonde T,P,RH(model_tmr23)
sgpsondewnpnB4.a1:
  • Mean Wind Speed(wspd)
  • Surface dew point temperature(dp)
  • lon(lon)
  • lat(lat)
  • V-component(v_wind)
  • Dry bulb temperature(tdry)
  • U-component(u_wind)
  • Relative humidity inside the instrument enclosure(rh)
  • Retrieved pressure profile(pres)
  • Ascent Rate(asc)
  • Dummy altitude for Zeb(alt)
  • Wind Direction(deg)
sgpsondewnpnB4.b1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • Wind Direction(deg)
  • Retrieved pressure profile(pres)
  • Mean Wind Speed(wspd)
  • Dry bulb temperature(tdry)
  • Surface dew point temperature(dp)
  • V-component(v_wind)
  • lon(lon)
  • Ascent Rate(asc)
  • Relative humidity inside the instrument enclosure(rh)
  • U-component(u_wind)

Back To Table of Contents

DQRID : D021112.2
Start DateStart TimeEnd DateEnd Time
11/10/2002182411/10/20021848
Subject:
SGP/SONDE/B4 - Possible interference in B4 sounding 20021110.1729
DataStreams:sgpsondeB4.00, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
Description:
There is a strange inversion aloft in the subject sounding.  The
temperature goes from -56.3 degC to -51.5 degC in less than two
minutes (approximately .72 km).  This is somewhat below the estimated
tropopause height.  I suspect this may be an interference problem,
but note that both the recorded pressure and RH values are reasonably
continuous.  More accurate assessment would require analysis of the
absolutely raw binary data; something that would require effort beyond
the limits of my IM funding.
Measurements:sgpsondeB4.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnB4.a1:
  • Mean Wind Speed(wspd)
  • Surface dew point temperature(dp)
  • lon(lon)
  • Wind Status(wstat)
  • lat(lat)
  • V-component(v_wind)
  • Dry bulb temperature(tdry)
  • U-component(u_wind)
  • Relative humidity inside the instrument enclosure(rh)
  • Retrieved pressure profile(pres)
  • Ascent Rate(asc)
  • base time(base_time)
  • Time offset of tweaks from base_time(time_offset)
  • Wind Direction(deg)
  • Dummy altitude for Zeb(alt)
sgpsondewnpnB4.b1:
  • base time(base_time)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • Wind Direction(deg)
  • Retrieved pressure profile(pres)
  • Mean Wind Speed(wspd)
  • Dry bulb temperature(tdry)
  • Time offset of tweaks from base_time(time_offset)
  • Surface dew point temperature(dp)
  • V-component(v_wind)
  • lon(lon)
  • Ascent Rate(asc)
  • Relative humidity inside the instrument enclosure(rh)
  • U-component(u_wind)
  • Wind Status(wstat)

Back To Table of Contents

DQRID : D021117.2
Start DateStart TimeEnd DateEnd Time
11/14/2002083011/14/20021010
Subject:
SGP/SONDE/B4 - B4 sounding contaminated by interference
DataStreams:sgpsondeB4.00, sgpsondewnpnB4.a1, sgpsondewnpnB4.b1
Description:
Much of this sounding is contaminated, apparently by interference from another sonde 
signal.  It is still no clear why this seems to happen more frequently at B4 than the other 
sites, especially since the wind seems to have been from the west and B4 should be the most 
upwind station.
Measurements:sgpsondeB4.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnB4.a1:
  • Mean Wind Speed(wspd)
  • Surface dew point temperature(dp)
  • lon(lon)
  • Wind Status(wstat)
  • lat(lat)
  • V-component(v_wind)
  • Dry bulb temperature(tdry)
  • U-component(u_wind)
  • Relative humidity inside the instrument enclosure(rh)
  • Retrieved pressure profile(pres)
  • Ascent Rate(asc)
  • base time(base_time)
  • Time offset of tweaks from base_time(time_offset)
  • Wind Direction(deg)
  • Dummy altitude for Zeb(alt)
sgpsondewnpnB4.b1:
  • base time(base_time)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • Wind Direction(deg)
  • Retrieved pressure profile(pres)
  • Mean Wind Speed(wspd)
  • Dry bulb temperature(tdry)
  • Time offset of tweaks from base_time(time_offset)
  • Surface dew point temperature(dp)
  • V-component(v_wind)
  • lon(lon)
  • Ascent Rate(asc)
  • Relative humidity inside the instrument enclosure(rh)
  • U-component(u_wind)
  • Wind Status(wstat)

Back To Table of Contents

DQRID : D021121.2
Start DateStart TimeEnd DateEnd Time
11/18/2002204311/18/20022229
Subject:
SGP/SONDE/B1 - Temperature sensor failed
DataStreams:sgpsondewnpnB1.a1, sgpsondewnpnB1.b1
Description:
It appears that the temperature sensor on this sonde broke shortly after launch with the 
effect that the temperatures read approximately 30 degC too low.  Other measurements that 
do not rely on the temperature, for example pressure and wind velocity, should be OK.
Measurements:sgpsondewnpnB1.b1:
  • Relative humidity inside the instrument enclosure(rh)
  • Dry bulb temperature(tdry)
  • Surface dew point temperature(dp)
sgpsondewnpnB1.a1:
  • Surface dew point temperature(dp)
  • Dry bulb temperature(tdry)
  • Relative humidity inside the instrument enclosure(rh)

Back To Table of Contents

DQRID : D990124.2
Start DateStart TimeEnd DateEnd Time
05/27/1992000005/31/20022359
Subject:
SGP/SONDE - Dry bias in sonde RH
DataStreams:DsgpsondeB1.00, DsgpsondeB1.a0, DsgpsondeB1.a1, DsgpsondeB4.00, DsgpsondeB4.a0,
DsgpsondeB4.a1, DsgpsondeB5.00, DsgpsondeB5.a0, DsgpsondeB5.a1, DsgpsondeC1.00, DsgpsondeC1.a0,
DsgpsondeC1.a1, DsgpsondenogcptucalcB1.c1, DsgpsondenogcptucalcB4.c1,
DsgpsondenogcptucalcB5.c1, DsgpsondenogcptucalcC1.c1, DsgpsondenogcwrpnB1.c1, DsgpsondenogcwrpnB4.c1,
DsgpsondenogcwrpnB5.c1, DsgpsondenogcwrpnC1.c1, DsgpsondeptuB1.00, DsgpsondeptuB4.00,
DsgpsondeptuB5.00, DsgpsondeptuB6.00, DsgpsondeptuC1.00, DsgpsondeptucalcB1.c1,
DsgpsondeptucalcB4.c1, DsgpsondeptucalcB5.c1, DsgpsondeptucalcC1.c1, sgpsondeB1.00,
sgpsondeB1.a0, sgpsondeB1.a1, sgpsondeB4.00, sgpsondeB4.a0, sgpsondeB4.a1, sgpsondeB5.00,
sgpsondeB5.a0, sgpsondeB5.a1, sgpsondeB6.00, sgpsondeC1.00, sgpsondeC1.a0, sgpsondeC1.a1,
sgpsondeptuC1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1, sgpsondewnpnB4.a0,
sgpsondewnpnB4.a1, sgpsondewnpnB5.a0, sgpsondewnpnB5.a1, sgpsondewnpnB6.a0, sgpsondewnpnB6.a1,
sgpsondewnpnC1.a0, sgpsondewnpnC1.a1, sgpsondewnprC1.a0, sgpsondewnprC1.a1,
sgpsondewrpnB1.00, sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.00, sgpsondewrpnB4.a0,
sgpsondewrpnB4.a1, sgpsondewrpnB5.00, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1,
sgpsondewrpnB6.00, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.00, sgpsondewrpnC1.a0,
sgpsondewrpnC1.a1, sgpsondewrprB1.00, sgpsondewrprB1.a0, sgpsondewrprB1.a1,
sgpsondewrprB4.00, sgpsondewrprB4.a0, sgpsondewrprB4.a1, sgpsondewrprB5.00, sgpsondewrprB5.a0,
sgpsondewrprB5.a1, sgpsondewrprC1.00, sgpsondewrprC1.a0, sgpsondewrprC1.a1
Description:
Vaisala has confirmed ARM findings of an apparent dry bias in the
relative humidity measured by RS-80H radiosondes.  The cause of
the dry bias is thought to be contamination of the humidity sensor
by volatile organic substances originating from some plastic parts
of the radiosonde.  The amount of contamination is a function of
the time between the date of sonde manufacture and its use.  All
RS-80H sondes manufactured before week 34 of 1998 will show this
bias.  After week 34 of 1998 Vaisala changed its packaging to
reduce, but not eliminate the contamination problem.

Starting with RS-80 radiosonde manufactured in late June 2000 Vaisala
enclosed the sensor boom in an inert plastic shield, thereby eliminating
the contamination that caused the dry bias.

Starting in May 2001 at the SGP, May 2002 at the TWP, and later 2002
at the NSA, ARM has moved to using RS-90 radiosondes.  These sondes
are not subject to the contaminatino that caused the dry bias.

Vaisala is in the process of developing an algorithm that can be 
used to estimate the correct RH from knowledge of the sonde age.
All of the ARM sounding data have sufficient metadata available
to apply the correction.

Additionally, ARM has funded a Science Team effort (Milosevich) to
develop a 'best' correction algorithm for the RS-80 radiosonde humidity
data.  When completed this algorithm will allow us to reprocess the
accumulated RS-80 data and produce a new data platform with what we
hope will be more accurate data.
Measurements:sgpsondeB4.00:
  • null(Raw data stream - documentation not supported)
DsgpsondeB5.00:
  • (Development raw data stream - documentation not supported)
sgpsondewrpnC1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
DsgpsondeptuB6.00:
  • (Development raw data stream - documentation not supported)
DsgpsondenogcptucalcB1.c1:
  • (Development data stream - documentation not supported)
sgpsondewrpnB6.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondeptuC1.00:
  • (Development raw data stream - documentation not supported)
sgpsondewnprC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondenogcptucalcB5.c1:
  • (Development data stream - documentation not supported)
DsgpsondeptucalcC1.c1:
  • (Development data stream - documentation not supported)
sgpsondewnpnB4.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondeB6.00:
  • null(Raw data stream - documentation not supported)
sgpsondewrprB4.00:
  • null(Raw data stream - documentation not supported)
DsgpsondeptuB1.00:
  • (Development raw data stream - documentation not supported)
DsgpsondenogcptucalcC1.c1:
  • (Development data stream - documentation not supported)
sgpsondewrpnC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrpnB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrprC1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewrpnB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrprB5.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondeB5.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrprB5.00:
  • null(Raw data stream - documentation not supported)
DsgpsondeC1.00:
  • (Development raw data stream - documentation not supported)
sgpsondewrprB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondeB1.00:
  • null(Raw data stream - documentation not supported)
sgpsondeptuC1.00:
  • null(Raw data stream - documentation not supported)
DsgpsondenogcptucalcB4.c1:
  • (Development data stream - documentation not supported)
DsgpsondeB1.a0:
  • (Development data stream - documentation not supported)
DsgpsondeC1.a1:
  • (Development data stream - documentation not supported)
DsgpsondeptucalcB5.c1:
  • (Development data stream - documentation not supported)
sgpsondewrprB1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewrpnC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrpnB1.00:
  • null(Raw data stream - documentation not supported)
sgpsondeB1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondeC1.a0:
  • (Development data stream - documentation not supported)
DsgpsondeB4.a1:
  • (Development data stream - documentation not supported)
DsgpsondeptuB4.00:
  • (Development raw data stream - documentation not supported)
sgpsondeB1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrprB5.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondeC1.00:
  • null(Raw data stream - documentation not supported)
sgpsondewnpnB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrpnB6.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrprC1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondeC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrprC1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondeptuB5.00:
  • (Development raw data stream - documentation not supported)
sgpsondewrpnB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrprB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondeB1.a1:
  • (Development data stream - documentation not supported)
sgpsondeB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewnpnB6.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
DsgpsondeB5.a1:
  • (Development data stream - documentation not supported)
DsgpsondenogcwrpnB1.c1:
  • (Development data stream - documentation not supported)
sgpsondewrprB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrpnB5.00:
  • null(Raw data stream - documentation not supported)
DsgpsondeB4.a0:
  • (Development data stream - documentation not supported)
DsgpsondenogcwrpnB4.c1:
  • (Development data stream - documentation not supported)
DsgpsondeB5.a0:
  • (Development data stream - documentation not supported)
sgpsondewnpnB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewnprC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrpnB5.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewnpnB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
DsgpsondeB4.00:
  • (Development raw data stream - documentation not supported)
sgpsondewrpnB6.00:
  • null(Raw data stream - documentation not supported)
sgpsondewrprB4.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewnpnB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondeB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondeC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewrpnB4.00:
  • null(Raw data stream - documentation not supported)
DsgpsondenogcwrpnB5.c1:
  • (Development data stream - documentation not supported)
sgpsondewnpnC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrpnB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
DsgpsondeB1.00:
  • (Development raw data stream - documentation not supported)
sgpsondeB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
sgpsondewnpnB6.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewrpnB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)
sgpsondewnpnB5.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)
DsgpsondeptucalcB4.c1:
  • (Development data stream - documentation not supported)
DsgpsondenogcwrpnC1.c1:
  • (Development data stream - documentation not supported)
sgpsondeB5.00:
  • null(Raw data stream - documentation not supported)
DsgpsondeptucalcB1.c1:
  • (Development data stream - documentation not supported)

Back To Table of Contents


END OF DATA