Data Quality Reports for Session: 119163 User: dmfoper Completed: 04/28/2009


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D011127.29SGP EBBR E18 - E18 EBBR Data Incorrect During 6 Month Checkssgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
D011218.8SGP EBBR E18 - E18 EBBR Right RH Incorrectsgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
D020717.20SGP/EBBR/E18 - Version 6 Produced Noisy Fluxessgp30ebbrE18.a1, sgp30ebbrE18.b1
D020717.21SGP/EBBR/E18 - AEM Hungsgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
D021113.1SGP/EBBR - Incorrect Units for Soil Heat Capacity (cs1, cs2, cs3, cs4, cs5) in 30EBBR
Header
sgp30ebbrE12.b1, sgp30ebbrE13.b1, sgp30ebbrE15.b1, sgp30ebbrE18.b1, sgp30ebbrE19.b1,
sgp30ebbrE2.b1, sgp30ebbrE20.b1, sgp30ebbrE22.b1, sgp30ebbrE26.b1, sgp30ebbrE4.b1,
sgp30ebbrE7.b1, sgp30ebbrE8.b1, sgp30ebbrE9.b1
D050719.11SGP/EBBR/E18 - Improved EBBR CR10 Programsgp30ebbrE18.b1


DQRID : D011127.29
Start DateStart TimeEnd DateEnd Time
04/03/2001225504/03/20012341
10/18/2001142110/18/20011601
Subject:
SGP EBBR E18 - E18 EBBR Data Incorrect During 6 Month Checks
DataStreams:sgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
Description:
The data was incorrect during the 6 month checks.
Measurements:sgp15ebbrE18.a1:
  • Wind direction (relative to true north)(mv_wind_d)
  • Reference temperature(rr_tref)
  • Soil temperature 4(rr_ts4)
  • Soil temperature 3(rr_ts3)
  • Soil temperature 1(rr_ts1)
  • Right relative humidity(mv_hum_r)
  • Left relative humidity(mv_hum_l)
  • Left air temperature(tair_l)
  • Soil moisture 1(r_sm1)
  • Soil moisture 2(r_sm2)
  • Soil moisture 3(r_sm3)
  • Temperature of right humidity sensor chamber(rr_thum_r)
  • Soil moisture 4(r_sm4)
  • Soil heat flow 1(mv_hft1)
  • scalar wind speed(wind_s)
  • Soil temperature 2(rr_ts2)
  • Soil temperature 5(rr_ts5)
  • Temperature of left humidity sensor chamber(rr_thum_l)
  • Net radiation(mv_q)
  • Soil moisture 5(r_sm5)
  • Soil heat flow 4(mv_hft4)
  • Soil heat flow 3(mv_hft3)
  • Soil heat flow 2(mv_hft2)
  • Soil heat flow 5(mv_hft5)
  • Right air temperature(tair_r)
  • Atmospheric pressure(mv_pres)

sgp30ebbrE18.b1:
  • net_radiation
  • latent_heat_flux
  • wspd_vec_mean
  • soil_heat_capacity_1
  • corr_soil_heat_flow_5
  • surface_soil_heat_flux_4
  • soil_moisture_1
  • soil_moisture_2
  • vapor_pressure_top
  • wdir_vec_std
  • bowen_ratio
  • surface_soil_heat_flux_5
  • wspd_arith_mean
  • surface_soil_heat_flux_3
  • surface_soil_heat_flux_avg
  • soil_heat_flow_5
  • corr_soil_heat_flow_3
  • soil_temp_1
  • energy_storage_change_4
  • corr_soil_heat_flow_4
  • soil_moisture_3
  • soil_temp_2
  • rh_top_fraction
  • soil_moisture_5
  • soil_temp_5
  • soil_temp_4
  • soil_temp_3
  • energy_storage_change_3
  • energy_storage_change_5
  • Barometric Pressure(atmos_pressure)
  • surface_soil_heat_flux_2
  • corr_soil_heat_flow_2
  • temp_air_top
  • surface_soil_heat_flux_1
  • energy_storage_change_2
  • energy_storage_change_1
  • temp_air_bottom
  • corr_soil_heat_flow_1
  • wdir_vec_mean
  • soil_heat_flow_4
  • temp_trh_top
  • soil_moisture_4
  • soil_heat_flow_3
  • soil_heat_capacity_2
  • rh_bottom_fraction
  • temp_reference
  • soil_heat_flow_1
  • sensible_heat_flux
  • soil_heat_capacity_3
  • soil_heat_capacity_4
  • soil_heat_capacity_5
  • soil_heat_flow_2
  • vapor_pressure_bottom
  • temp_trh_bottom

sgp15ebbrE18.b1:
  • soil_heat_flow_1_mv
  • soil_temp_1_rr
  • rh_right_mv
  • net_radiation_mv
  • temp_air_right
  • wspd_arith_mean
  • temp_air_left
  • soil_temp_3_rr
  • temp_reference_rr
  • soil_moisture_5_rr
  • soil_temp_5_rr
  • soil_temp_2_rr
  • rh_left_mv
  • soil_heat_flow_5_mv
  • atmos_pressure_mv
  • soil_temp_4_rr
  • soil_moisture_1_rr
  • wdir_vec_mean_mv
  • temp_trh_right_rr
  • soil_heat_flow_3_mv
  • soil_heat_flow_2_mv
  • soil_heat_flow_4_mv
  • soil_moisture_4_rr
  • soil_moisture_3_rr
  • soil_moisture_2_rr
  • temp_trh_left_rr

sgp5ebbrE18.a1:
  • bottom vapor pressure(vp_bot)
  • Temperature of the top humidity chamber(thum_top)
  • Retrieved pressure profile(pres)
  • net radiation(q)
  • bottom air temperature(tair_bot)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • Reference Thermistor Temperature(tref)
  • vector wind speed(res_ws)
  • scalar wind speed(wind_s)
  • top air temperature(tair_top)
  • standard deviation of wind direction (sigma theta)(sigma_wd)
  • top vapor pressure(vp_top)
  • Bottom humidity(hum_bot)
  • Top humidity(hum_top)
  • wind direction (relative to true north)(wind_d)

sgp30ebbrE18.a1:
  • 5 cm soil heat flow corrected for soil moisture content, site 5(c_shf5)
  • Soil heat capacity 3(cs3)
  • 5 cm soil heat flow corrected for soil moisture content, site 3(c_shf3)
  • 5 cm soil heat flow corrected for soil moisture content, site 2(c_shf2)
  • soil heat flow, site 2(g2)
  • soil heat flow, site 4(g4)
  • volumetric soil moisture, site 4(sm4)
  • 5 cm soil heat flow corrected for soil moisture content, site 4(c_shf4)
  • 0-5 cm integrated soil temperature, site 2(ts1)
  • Temperature of the top humidity chamber(thum_top)
  • h(h)
  • Soil heat capacity 4(cs4)
  • 5 cm soil heat flow, site 1(shf1)
  • wind direction (relative to true north)(wind_d)
  • 5 cm soil heat flow, site 2(shf2)
  • 0-5 cm integrated soil temperature, site 2(ts2)
  • volumetric soil moisture, site 1(sm1)
  • soil heat flow, site 3(g3)
  • 5 cm soil heat flow, site 5(shf5)
  • vector wind speed(res_ws)
  • average surface soil heat flow(ave_shf)
  • net radiation(q)
  • Soil heat capacity 1(cs1)
  • top vapor pressure(vp_top)
  • ratio of sensible/latent heat fluxes (Bowen ratio)(bowen)
  • 5 cm soil heat flow corrected for soil moisture content, site 1(c_shf1)
  • bottom vapor pressure(vp_bot)
  • top air temperature(tair_top)
  • 0-5 cm integrated soil temperature, site 4(ts4)
  • Bottom humidity(hum_bot)
  • 5 cm soil heat flow, site 4(shf4)
  • Reference Thermistor Temperature(tref)
  • volumetric soil moisture, site 2(sm2)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • latent heat flux(e)
  • Soil heat capacity 5(cs5)
  • scalar wind speed(wind_s)
  • 0-5 cm integrated soil temperature, site 5(ts5)
  • 0-5 cm change in soil heat storage with time, site 5(ces5)
  • Soil heat capacity 2(cs2)
  • 5 cm soil heat flow, site 3(shf3)
  • 0-5 cm integrated soil temperature, site 3(ts3)
  • Top humidity(hum_top)
  • 0-5 cm change in soil heat storage with time, site 3(ces3)
  • volumetric soil moisture, site 5(sm5)
  • Retrieved pressure profile(pres)
  • soil heat flow, site 5(g5)
  • 0-5 cm change in soil heat storage with time, site 2(ces2)
  • 0-5 cm change in soil heat storage with time, site 2(ces1)
  • 0-5 cm change in soil heat storage with time, site 4(ces4)
  • bottom air temperature(tair_bot)
  • standard deviation of wind direction (sigma theta)(sigma_wd)
  • soil heat flow, site 1(g1)
  • volumetric soil moisture, site 3(sm3)


Back To Table of Contents

DQRID : D011218.8
Start DateStart TimeEnd DateEnd Time
05/10/2001181006/12/20012240
Subject:
SGP EBBR E18 - E18 EBBR Right RH Incorrect
DataStreams:sgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
Description:
The RH portion of the T/RH probe produced incorrect data.
Sensible and latent heat fluxes and the Bowen ratio were
also incorrect.
Measurements:sgp15ebbrE18.a1:
  • Right relative humidity(mv_hum_r)
  • Temperature of right humidity sensor chamber(rr_thum_r)

sgp30ebbrE18.b1:
  • bowen_ratio
  • rh_top_fraction
  • latent_heat_flux
  • rh_bottom_fraction
  • sensible_heat_flux
  • temp_trh_top
  • vapor_pressure_bottom
  • temp_trh_bottom
  • vapor_pressure_top

sgp15ebbrE18.b1:
  • temp_trh_right_rr
  • rh_right_mv

sgp5ebbrE18.a1:
  • Temperature of the top humidity chamber(thum_top)
  • bottom vapor pressure(vp_bot)
  • Bottom humidity(hum_bot)
  • Top humidity(hum_top)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • top vapor pressure(vp_top)

sgp30ebbrE18.a1:
  • top vapor pressure(vp_top)
  • ratio of sensible/latent heat fluxes (Bowen ratio)(bowen)
  • bottom vapor pressure(vp_bot)
  • Bottom humidity(hum_bot)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • latent heat flux(e)
  • Temperature of the top humidity chamber(thum_top)
  • h(h)
  • Top humidity(hum_top)


Back To Table of Contents

DQRID : D020717.20
Start DateStart TimeEnd DateEnd Time
11/01/2001000003/29/20021631
Subject:
SGP/EBBR/E18 - Version 6 Produced Noisy Fluxes
DataStreams:sgp30ebbrE18.a1, sgp30ebbrE18.b1
Description:
Version 6 of the CR10 program produced noisy latent and sensible heat fluxes.  That ended 
on 
March 29 after a recalibration unit was installed with version 8.
Measurements:sgp30ebbrE18.b1:
  • latent_heat_flux
  • sensible_heat_flux

sgp30ebbrE18.a1:
  • h(h)
  • latent heat flux(e)


Back To Table of Contents

DQRID : D020717.21
Start DateStart TimeEnd DateEnd Time
11/14/2001194511/14/20012001
11/25/2001021511/25/20011901
11/28/2001114511/28/20011501
11/29/2001074511/29/20010931
11/29/2001141511/30/20010431
12/02/2001014512/02/20010201
12/03/2001004512/03/20010101
12/24/2001201512/24/20012031
12/25/2001191512/25/20012031
01/18/2002011501/18/20020201
01/22/2002161501/22/20021631
01/24/2002211501/24/20022131
01/28/2002134501/28/20021401
02/13/2002221502/14/20020801
02/25/2002234502/26/20020001
03/14/2002151503/29/20021831
04/06/2002003004/17/20021401
04/18/2002223004/30/20022031
05/01/2002030005/28/20022031
Subject:
SGP/EBBR/E18 - AEM Hung
DataStreams:sgp15ebbrE18.a1, sgp15ebbrE18.b1, sgp30ebbrE18.a1, sgp30ebbrE18.b1, sgp5ebbrE18.a1
Description:
The automatic exchange mechanism did not work properly for a number of time periods.  The 
Bowen ratio, latent heat flux, and sensible heat flux were incorrect also during this 
condition.
Measurements:sgp15ebbrE18.a1:
  • Right air temperature(tair_r)
  • Left air temperature(tair_l)

sgp30ebbrE18.b1:
  • rh_top_fraction
  • bowen_ratio
  • latent_heat_flux
  • rh_bottom_fraction
  • temp_air_top
  • sensible_heat_flux
  • temp_air_bottom
  • temp_trh_top
  • vapor_pressure_bottom
  • temp_trh_bottom
  • vapor_pressure_top

sgp15ebbrE18.b1:
  • temp_air_left
  • temp_air_right

sgp5ebbrE18.a1:
  • bottom vapor pressure(vp_bot)
  • Temperature of the top humidity chamber(thum_top)
  • Bottom humidity(hum_bot)
  • top air temperature(tair_top)
  • Top humidity(hum_top)
  • bottom air temperature(tair_bot)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • top vapor pressure(vp_top)

sgp30ebbrE18.a1:
  • top vapor pressure(vp_top)
  • ratio of sensible/latent heat fluxes (Bowen ratio)(bowen)
  • bottom vapor pressure(vp_bot)
  • top air temperature(tair_top)
  • Bottom humidity(hum_bot)
  • Temperature of bottom humidity sensor chamber(thum_bot)
  • bottom air temperature(tair_bot)
  • latent heat flux(e)
  • Temperature of the top humidity chamber(thum_top)
  • h(h)
  • Top humidity(hum_top)


Back To Table of Contents

DQRID : D021113.1
Start DateStart TimeEnd DateEnd Time
04/01/2001000006/18/20032359
Subject:
SGP/EBBR - Incorrect Units for Soil Heat Capacity (cs1, cs2, cs3, cs4, cs5) in 30EBBR 
Header
DataStreams:sgp30ebbrE12.b1, sgp30ebbrE13.b1, sgp30ebbrE15.b1, sgp30ebbrE18.b1, sgp30ebbrE19.b1,
sgp30ebbrE2.b1, sgp30ebbrE20.b1, sgp30ebbrE22.b1, sgp30ebbrE26.b1, sgp30ebbrE4.b1,
sgp30ebbrE7.b1, sgp30ebbrE8.b1, sgp30ebbrE9.b1
Description:
The units for Soil Heat Capacity (cs1, cs2, cs3, cs4, cs5) in the 
EBBR 30 minute netcdf header have been incorrect from the beginning 
of processing the data into netcdf files.  The correct units are 
MJ/m^3/C.

This does not affect the data quality.
Measurements:sgp30ebbrE8.b1:
  • soil_heat_capacity_2
  • soil_heat_capacity_1
  • soil_heat_capacity_3
  • soil_heat_capacity_5
  • soil_heat_capacity_4

sgp30ebbrE4.b1:
  • soil_heat_capacity_4
  • soil_heat_capacity_2
  • soil_heat_capacity_3
  • soil_heat_capacity_5
  • soil_heat_capacity_1

sgp30ebbrE9.b1:
  • soil_heat_capacity_3
  • soil_heat_capacity_5
  • soil_heat_capacity_1
  • soil_heat_capacity_4
  • soil_heat_capacity_2

sgp30ebbrE18.b1:
  • soil_heat_capacity_1
  • soil_heat_capacity_2
  • soil_heat_capacity_3
  • soil_heat_capacity_4
  • soil_heat_capacity_5

sgp30ebbrE26.b1:
  • soil_heat_capacity_3
  • soil_heat_capacity_4
  • soil_heat_capacity_5
  • soil_heat_capacity_2
  • soil_heat_capacity_1

sgp30ebbrE13.b1:
  • soil_heat_capacity_3
  • soil_heat_capacity_5
  • soil_heat_capacity_4
  • soil_heat_capacity_2
  • soil_heat_capacity_1

sgp30ebbrE7.b1:
  • soil_heat_capacity_5
  • soil_heat_capacity_4
  • soil_heat_capacity_2
  • soil_heat_capacity_3
  • soil_heat_capacity_1

sgp30ebbrE12.b1:
  • soil_heat_capacity_2
  • soil_heat_capacity_4
  • soil_heat_capacity_3
  • soil_heat_capacity_1
  • soil_heat_capacity_5

sgp30ebbrE19.b1:
  • soil_heat_capacity_4
  • soil_heat_capacity_5
  • soil_heat_capacity_3
  • soil_heat_capacity_1
  • soil_heat_capacity_2

sgp30ebbrE20.b1:
  • soil_heat_capacity_2
  • soil_heat_capacity_1
  • soil_heat_capacity_5
  • soil_heat_capacity_3
  • soil_heat_capacity_4

sgp30ebbrE22.b1:
  • soil_heat_capacity_3
  • soil_heat_capacity_5
  • soil_heat_capacity_2
  • soil_heat_capacity_4
  • soil_heat_capacity_1

sgp30ebbrE2.b1:
  • soil_heat_capacity_5
  • soil_heat_capacity_4
  • soil_heat_capacity_1
  • soil_heat_capacity_3
  • soil_heat_capacity_2

sgp30ebbrE15.b1:
  • soil_heat_capacity_5
  • soil_heat_capacity_1
  • soil_heat_capacity_3
  • soil_heat_capacity_2
  • soil_heat_capacity_4


Back To Table of Contents

DQRID : D050719.11
Start DateStart TimeEnd DateEnd Time
04/01/2001000003/30/20050000
Subject:
SGP/EBBR/E18 - Improved EBBR CR10 Program
DataStreams:sgp30ebbrE18.b1
Description:
Effective 20050330.0000, the EBBR.E18 CR10 program was revised to improve 
the quality of the primary measurements as follows:
   
1) An RMS procedure is used to determine max and min limits of acceptable
soil heat flow.  This is applied to the individual soil sets.  Measurements
outside the limits are rejected and the measurements within the limits are
used to calculate the average soil heat flow.
   
2) Max and min limits are used to determine incorrect values of net
radiation, sensible heat flux (h), latent heat flux (e), and automatic
exchange mechanism (AEM) signal.  If AEM signal is outside the limits, h 
and e are set to 999s.  If net radiation is outside the limits, h and e are 
set to 999s. If h or e are outside the limits, h and e are set to 999s.
   
Virtually no incorrect soil measurement will affect the primary 
measurements of h and e.
   
By setting h and e to 999s, it can be easily seen that the primary 
variables are incorrect; no other interpretation is possible.
   
Prior to 20050330, the improved CR10 program was NOT in effect.  DQRs have
been submitted for known instances of incorrect soil measurements which
affected the quality of the primary measurements of h and e.
   
Note: the DQR begin date is the begin date of the sgp30ebbrE18.b1 data
stream.  The earlier version of the CR10 program was also used on previous
EBBR datastream names (e.g. sgp30ebbrE18.a1).
Measurements:sgp30ebbrE18.b1:
  • latent_heat_flux
  • sensible_heat_flux
  • surface_soil_heat_flux_avg


Back To Table of Contents



END OF DATA