Data Quality Reports for Session: 117527 User: lkberg Completed: 02/16/2009

TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D040526.16SGP/RWP/I1/I2/I3 - Metadata errorssgp915rwptempconI1.a1, sgp915rwptempconI2.a1, sgp915rwptempconI3.a1, sgp915rwptempmomI1.a0,
sgp915rwptempmomI2.a0, sgp915rwptempmomI3.a0, sgp915rwptempspecI1.a0,
sgp915rwptempspecI2.a0, sgp915rwptempspecI3.a0, sgp915rwpwindconI1.a1, sgp915rwpwindconI2.a1,
sgp915rwpwindconI3.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindmomI2.a0, sgp915rwpwindmomI3.a0,
sgp915rwpwindspecI1.a0, sgp915rwpwindspecI2.a0, sgp915rwpwindspecI3.a0
D050110.2SGP/RWP/I3 - Missing datasgp915rwpI3.00, sgp915rwprawI3.00, sgp915rwptempconI3.a1, sgp915rwptempmomI3.a0,
sgp915rwptempspecI3.a0, sgp915rwpwindconI3.a1, sgp915rwpwindmomI3.a0, sgp915rwpwindspecI3.a0
D060517.1SGP/RWP/I1 - Wind speed too small, directions likely bad due to incorrect beam controlsgp915rwpwindconI1.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindspecI1.a0
D060517.2SGP/RWP/C1 - Reprocess: Wind directions reversedsgp915rwpwindconC1.a1, sgp915rwpwindmomC1.a0
D080502.2SGP/RWP/C1 - Reprocess: Instrument in non-standard mode for IOPsgp915rwptempconC1.a1, sgp915rwptempmomC1.a0, sgp915rwptempspecC1.a0,
sgp915rwpwindconC1.a1, sgp915rwpwindmomC1.a0, sgp915rwpwindspecC1.a0
D090129.3SGP/RWP/I1 - Instrument down for final amplifier maintenance: ref dqpr 2043sgp915rwptempconI1.a1, sgp915rwptempmomI1.a0, sgp915rwptempspecI1.a0,
sgp915rwpwindconI1.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindspecI1.a0


DQRID : D040526.16
Start DateStart TimeEnd DateEnd Time
04/01/2001000005/07/20032359
Subject:
SGP/RWP/I1/I2/I3 - Metadata errors
DataStreams:sgp915rwptempconI1.a1, sgp915rwptempconI2.a1, sgp915rwptempconI3.a1, sgp915rwptempmomI1.a0,
sgp915rwptempmomI2.a0, sgp915rwptempmomI3.a0, sgp915rwptempspecI1.a0,
sgp915rwptempspecI2.a0, sgp915rwptempspecI3.a0, sgp915rwpwindconI1.a1, sgp915rwpwindconI2.a1,
sgp915rwpwindconI3.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindmomI2.a0, sgp915rwpwindmomI3.a0,
sgp915rwpwindspecI1.a0, sgp915rwpwindspecI2.a0, sgp915rwpwindspecI3.a0
Description:
The latitude, longitude and altitude of the Intermediate Facility
915RWPs were incorrectly entered into the ARM database.

The correct location of the SGP.I1 915RWP is:
   Lat: 37.626N
   Lon: 96.538W
   Alt:    478m

The correct location of the SGP.I2 915RWP is:
   Lat: 37.280N
   Lon: 98.933W
   Alt:    616m

The correct location of the SGP.I3 915RWP is:
   Lat: 35.551N
   Lon: 96.864W
   Alt:    275m
Measurements:sgp915rwptempmomI1.a0:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
sgp915rwpwindconI2.a1:
  • lon(lon)
  • lat(lat)
  • Dummy altitude for Zeb(alt)
sgp915rwpwindmomI3.a0:
  • lat(lat)
  • Dummy altitude for Zeb(alt)
  • lon(lon)
sgp915rwpwindspecI2.a0:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)
sgp915rwpwindconI1.a1:
  • lon(lon)
  • lat(lat)
  • Dummy altitude for Zeb(alt)
sgp915rwpwindmomI2.a0:
  • lat(lat)
  • lon(lon)
  • Dummy altitude for Zeb(alt)
sgp915rwptempspecI3.a0:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
sgp915rwptempspecI2.a0:
  • lon(lon)
  • lat(lat)
  • Dummy altitude for Zeb(alt)
sgp915rwptempconI1.a1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)
sgp915rwptempmomI3.a0:
  • lat(lat)
  • lon(lon)
  • Dummy altitude for Zeb(alt)
sgp915rwptempspecI1.a0:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)
sgp915rwpwindmomI1.a0:
  • Dummy altitude for Zeb(alt)
  • lon(lon)
  • lat(lat)
sgp915rwpwindspecI3.a0:
  • lat(lat)
  • lon(lon)
  • Dummy altitude for Zeb(alt)
sgp915rwptempconI3.a1:
  • lon(lon)
  • lat(lat)
  • Dummy altitude for Zeb(alt)
sgp915rwpwindconI3.a1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)
sgp915rwpwindspecI1.a0:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)
sgp915rwptempmomI2.a0:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
sgp915rwptempconI2.a1:
  • Dummy altitude for Zeb(alt)
  • lon(lon)
  • lat(lat)

Back To Table of Contents

DQRID : D050110.2
Start DateStart TimeEnd DateEnd Time
09/01/2004000003/01/20052359
03/31/2005000005/29/20052359
06/07/2006000009/27/20062359
Subject:
SGP/RWP/I3 - Missing data
DataStreams:sgp915rwpI3.00, sgp915rwprawI3.00, sgp915rwptempconI3.a1, sgp915rwptempmomI3.a0,
sgp915rwptempspecI3.a0, sgp915rwpwindconI3.a1, sgp915rwpwindmomI3.a0, sgp915rwpwindspecI3.a0
Description:
The phase shifter at Meeker failed and repeated efforts to repair it failed. There may be 
a few dates within the specified missing data range where data exists but it was part of 
a trouble shooting exercise and should be ignored.
Measurements:sgp915rwpI3.00:
  • null(Raw data stream - documentation not supported)
sgp915rwpwindmomI3.a0:
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Mean atmospheric vertical velocity(mdf)
sgp915rwprawI3.00:
  • Raw data stream - documentation not supported(raw)
sgp915rwpwindspecI3.a0:
  • Spectral Data (signal strength/freq int)(spc_amp)
sgp915rwptempconI3.a1:
  • virtual_temp_corr(virtual_temp_corr)
  • Time offset of tweaks from base_time(time_offset)
  • Number of Values that Passed Consensus, Beam 0 Virtual Temperature(ncns_virtual_temp)
  • Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
  • Number of Values that Passed Consensus, Corrected Beam 0 Virtual Temperature(ncns_virtual_temp_corr)
  • Number of Values Required for Consensus, Beam 0(nrcns)
  • Beam 0 virtual temperature(virtual_temp)
  • Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
  • Vertical wind velocity(vert_v)
  • Number of pulses/ave int, Beam 0(nrec)
  • Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)
  • Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
sgp915rwpwindconI3.a1:
  • Number of Values Required for Consensus, Beam 1(nrcns1)
  • Number of values that passed consensus, beam 4(ncns4)
  • Number of spectra/ave int, Beam 2(nrec2)
  • Number of Values Required for Consensus, Beam 3(nrcns3)
  • Beam 1 radial wind speed(vel1)
  • Beam 2 radial wind speed(vel2)
  • Number of values that passed consensus, beam 1(ncns1)
  • Ave snr*10 level, Beam 2(snr2)
  • Number of values that passed consensus, beam 3(ncns3)
  • Number of Values Required for Consensus, Beam 2(nrcns2)
  • Number of Values Required for Consensus, Beam 4(nrcns4)
  • Number of values that passed consensus, beam 2(ncns2)
  • copolar signal to noise ratio(snr1)
  • U-component(u_wind)
  • Number of values that passed consensus, beam 0(ncns0)
  • Beam 4 radial wind speed(vel4)
  • Number of Values Required for Consensus, Beam 0(nrcns0)
  • Signal to Noise Ratio, Beam 4(snr4)
  • Signal to Noise Ratio, Beam 3(snr3)
  • Beam 3 radial wind speed(vel3)
  • Number of spectra/ave int, Beam 0(nrec0)
  • Beam 0 radial wind speed(vel0)
  • Number of spectra/ave int, Beam 1(nrec1)
  • Signal to Noise Ratio, Beam 0(snr0)
  • Number of spectra/ave int, Beam 4(nrec4)
  • V-component(v_wind)
  • Number of spectra/ave int, Beam 3(nrec3)
sgp915rwptempspecI3.a0:
  • Spectral Data (signal strength/freq int)(spc_amp)
sgp915rwptempmomI3.a0:
  • Beam 0 virtual temperature(virtual_temp)
  • Signal to Noise Ratio of the RASS Signal(snr)
  • Signal to Noise Ratio: acoustic(ssnr)
  • Mean atmospheric vertical velocity(mdf)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Range Gate Spacing(rgs)
  • Acoustic Spectral Width(sspecw)
  • Mean acoustic speed(smdf)
  • Spectral Width: vert velocity(specw)

Back To Table of Contents

DQRID : D060517.1
Start DateStart TimeEnd DateEnd Time
07/21/2005152804/11/20061112
Subject:
SGP/RWP/I1 - Wind speed too small, directions likely bad due to incorrect beam control
DataStreams:sgp915rwpwindconI1.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindspecI1.a0
Description:
two beams, sometimes three of the four tilted possible are incorrect due either to a phase 
shifter problem or improper control of the phase shifter.
Measurements:sgp915rwpwindmomI1.a0:
  • Mean atmospheric vertical velocity(mdf)
sgp915rwpwindspecI1.a0:
  • Spectral Data (signal strength/freq int)(spc_amp)
sgp915rwpwindconI1.a1:
  • V-component(v_wind)
  • Beam 2 radial wind speed(vel2)
  • U-component(u_wind)
  • Beam 4 radial wind speed(vel4)
  • Beam 1 radial wind speed(vel1)
  • Beam 3 radial wind speed(vel3)

Back To Table of Contents

DQRID : D060517.2
Start DateStart TimeEnd DateEnd Time
03/02/2006154405/04/20062000
Subject:
SGP/RWP/C1 - Reprocess: Wind directions reversed
DataStreams:sgp915rwpwindconC1.a1, sgp915rwpwindmomC1.a0
Description:
The new phase shifter had the delay lines reversed, which resulted in the beams going in 
the wrong directions.  The speeds are correct and the directions are 180 deg off.  
Vertical velocities are ok
Measurements:sgp915rwpwindconC1.a1:
  • Azimuth of Beam 1(azimuth1)
  • Beam 3 radial wind speed(vel3)
  • Azimuth of Beam 3 for WINDS data(azimuth3)
  • V-component(v_wind)
  • Azimuth of Beam 2(azimuth2)
  • Beam 4 radial wind speed(vel4)
  • Azimuth of Beam 4 for WINDS data(azimuth4)
  • Beam 2 radial wind speed(vel2)
  • U-component(u_wind)
  • Beam 1 radial wind speed(vel1)
sgp915rwpwindmomC1.a0:
  • Beam Number(beam)
  • Mean atmospheric vertical velocity(mdf)

Back To Table of Contents

DQRID : D080502.2
Start DateStart TimeEnd DateEnd Time
09/06/2007190010/03/20071500
Subject:
SGP/RWP/C1 - Reprocess: Instrument in non-standard mode for IOP
DataStreams:sgp915rwptempconC1.a1, sgp915rwptempmomC1.a0, sgp915rwptempspecC1.a0,
sgp915rwpwindconC1.a1, sgp915rwpwindmomC1.a0, sgp915rwpwindspecC1.a0
Description:
The SGP.C1 915RWP was operated in a non-standard mode during the Nocturnal
Flux IOP (approximately the month of September). The profiler was placed into a constant 
high temporal and spatial resolution mode rather than alternating between modes as it does 
routinely. 30 min averages were produced (usually 60 min) at a 60 m gate resolution for 
both winds and RASS. 

Data were processed and archived, but the processing algorithm interpreted this data as 2 
different power levels per hourly sample rather than 30 minute samples at the same power 
level.  Data will be reprocessed.
Measurements:sgp915rwptempconC1.a1:
  • Vertical wind velocity(vert_v)
  • Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
  • Average Interval(avgint)
  • Array of heights for the range gates(height)
  • Number of Values that Passed Consensus, Corrected Beam 0 Virtual Temperature(ncns_virtual_temp_corr)
  • virtual_temp_corr(virtual_temp_corr)
  • Sample Rate(sampr)
  • Beam 0 virtual temperature(virtual_temp)
  • Number of Values that Passed Consensus, Beam 0 Virtual Temperature(ncns_virtual_temp)
  • Time offset of tweaks from base_time(time_offset)
  • lon(lon)
  • Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
  • lat(lat)
  • Range Gate Spacing(rgs)
  • Dummy altitude for Zeb(alt)
  • Number of pulses/ave int, Beam 0(nrec)
  • Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
  • base time(base_time)
  • Number of Values Required for Consensus, Beam 0(nrcns)
  • Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)
sgp915rwpwindconC1.a1:
  • Array of heights for each sample time(height_p)
  • Time Domain Integration Time(tditime)
  • copolar signal to noise ratio(snr1)
  • Signal to Noise Ratio, Beam 4(snr4)
  • Number of spectra/ave int, Beam 0(nrec0)
  • Range Gate Spacing(rgs)
  • Beam 2 radial wind speed(vel2)
  • Number of spectra/ave int, Beam 2(nrec2)
  • Number of Values Required for Consensus, Beam 0(nrcns0)
  • Beam 3 radial wind speed(vel3)
  • Number of Values Required for Consensus, Beam 4(nrcns4)
  • Signal to Noise Ratio, Beam 0(snr0)
  • Beam 1 radial wind speed(vel1)
  • Number of Coherent Samples/spectral point(ncoh)
  • Azimuth of Beam 2(azimuth2)
  • Number of Pulse Code Bits(pcbits)
  • base time(base_time)
  • Azimuth of Beam 3 for WINDS data(azimuth3)
  • Number of valid heights(nheight)
  • Azimuth of Beam 4 for WINDS data(azimuth4)
  • Rx Bandwidth Switch Code(bswitch)
  • Number of spectra/ave int, Beam 3(nrec3)
  • Azimuth of Beam 0(azimuth0)
  • Height Index(range_gate)
  • Number of spectra/ave int, Beam 4(nrec4)
  • Number of Values Required for Consensus, Beam 1(nrcns1)
  • U-component(u_wind)
  • Sample Rate(sampr)
  • Elevation angle of Beam 0 for WINDS data(elevation0)
  • Pulse Repetition Frequency(prf)
  • Elevation angle of Beam 3 for WINDS data(elevation3)
  • Number of Values Required for Consensus, Beam 2(nrcns2)
  • V-component(v_wind)
  • Number of values that passed consensus, beam 2(ncns2)
  • Oblique FFT Bandwidth(oband)
  • Ave Time per Average Spectra.(spcavetim)
  • Horizontal wind direction(dir)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Number of values that passed consensus, beam 4(ncns4)
  • Number of Values Required for Consensus, Beam 3(nrcns3)
  • Dummy altitude for Zeb(alt)
  • lon(lon)
  • Height of Center of First Range Gate(rgf)
  • Beam 0 radial wind speed(vel0)
  • Interpulse Period(ipp)
  • Oblique Velocity Spectral Resolution(ovsr)
  • Elevation angle of Beam 2 for WINDS data(elevation2)
  • Elevation angle of Beam 4 for WINDS data(elevation4)
  • Horizontal wind speed(spd)
  • Number of values that passed consensus, beam 0(ncns0)
  • Vertical Velocity Spectral Resolution(vvsr)
  • Delay Time to 1st Gate(dly)
  • Azimuth of Beam 1(azimuth1)
  • lat(lat)
  • Pulse Length(plen)
  • Height of Center of Last Range Gate(rgl)
  • Vertical FFT Bandwidth(vband)
  • Number of spectra/ave int, Beam 1(nrec1)
  • Beam 4 radial wind speed(vel4)
  • Number of values that passed consensus, beam 3(ncns3)
  • Average Interval(avgint)
  • Elevation angle of Beam 1 for WINDS data(elevation1)
  • Time offset of tweaks from base_time(time_offset)
  • Power offset(power)
  • Signal to Noise Ratio, Beam 3(snr3)
  • Ave snr*10 level, Beam 2(snr2)
  • Individual Spectrum Integration Time(sitime)
  • Number of values that passed consensus, beam 1(ncns1)
sgp915rwptempspecC1.a0:
  • Spectral Data (signal strength/freq int)(spc_amp)
  • lat(lat)
  • Range Gate Spacing(rgs)
  • Array of heights for the range gates(height)
  • lon(lon)
  • Particle radius at logarithmic center of bin(bins)
  • Time offset of tweaks from base_time(time_offset)
  • Sample Rate(sampr)
  • Dummy altitude for Zeb(alt)
  • base time(base_time)
sgp915rwptempmomC1.a0:
  • base time(base_time)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Signal to Noise Ratio: acoustic(ssnr)
  • lat(lat)
  • Beam 0 virtual temperature(virtual_temp)
  • Sample Rate(sampr)
  • Acoustic Spectral Width(sspecw)
  • lon(lon)
  • Array of heights for the range gates(height)
  • Time offset of tweaks from base_time(time_offset)
  • Range Gate Spacing(rgs)
  • Mean atmospheric vertical velocity(mdf)
  • Mean acoustic speed(smdf)
  • Spectral Width: vert velocity(specw)
  • Dummy altitude for Zeb(alt)
  • Signal to Noise Ratio of the RASS Signal(snr)
sgp915rwpwindmomC1.a0:
  • Pulse Length(plen)
  • Number of Coherent Samples/spectral point(ncoh)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Sample Rate(sampr)
  • Number of valid heights(nheight)
  • Vertical FFT Bandwidth(vband)
  • Individual Spectrum Integration Time(sitime)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Interpulse Period(ipp)
  • Beam Number(beam)
  • Signal to Noise Ratio of the RASS Signal(snr)
  • lat(lat)
  • Time offset of tweaks from base_time(time_offset)
  • Array of heights for each sample time(height_t)
  • base time(base_time)
  • Time Domain Integration Time(tditime)
  • Pulse Repetition Frequency(prf)
  • Height Index(range_gate)
  • Spectral Width: vert velocity(specw)
  • Height of Center of Last Range Gate(rgl)
  • lon(lon)
  • Mean atmospheric vertical velocity(mdf)
  • Number of Pulse Code Bits(pcbits)
  • Radial Velocity Spectral Resolution(vsr)
  • Oblique FFT Bandwidth(oband)
  • Delay Time to 1st Gate(dly)
  • elevation(elevation)
  • Height of Center of First Range Gate(rgf)
  • Range Gate Spacing(rgs)
  • Dummy altitude for Zeb(alt)
  • Ave Time per Average Spectra. Also known as dwell.(spcavetime)
  • Rx Bandwidth Switch Code(bswitch)
sgp915rwpwindspecC1.a0:
  • Ave Time per Average Spectra.(spcavetim)
  • Time Domain Integration Time(tditime)
  • Time offset of tweaks from base_time(time_offset)
  • lon(lon)
  • Beam Number(beam)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Height of Center of First Range Gate(rgf)
  • Pulse Repetition Frequency(prf)
  • Individual Spectrum Integration Time(sitime)
  • Sample Rate(sampr)
  • base time(base_time)
  • Dummy altitude for Zeb(alt)
  • Radial Velocity Spectral Resolution(vsr)
  • Number of Coherent Samples/spectral point(ncoh)
  • Vertical FFT Bandwidth(vband)
  • Height Index(range_gate)
  • Spectral Data (signal strength/freq int)(spc_amp)
  • Array of heights for each sample time(height_t)
  • Rx Bandwidth Switch Code(bswitch)
  • elevation(elevation)
  • Height of Center of Last Range Gate(rgl)
  • Range Gate Spacing(rgs)
  • Oblique FFT Bandwidth(oband)
  • lat(lat)
  • Pulse Length(plen)
  • Number of valid heights(nheight)
  • Delay Time to 1st Gate(dly)
  • Number of Pulse Code Bits(pcbits)
  • Particle radius at logarithmic center of bin(bins)
  • Interpulse Period(ipp)

Back To Table of Contents

DQRID : D090129.3
Start DateStart TimeEnd DateEnd Time
11/13/2008150012/08/20081500
Subject:
SGP/RWP/I1 - Instrument down for final amplifier maintenance: ref dqpr 2043
DataStreams:sgp915rwptempconI1.a1, sgp915rwptempmomI1.a0, sgp915rwptempspecI1.a0,
sgp915rwpwindconI1.a1, sgp915rwpwindmomI1.a0, sgp915rwpwindspecI1.a0
Description:
Final amplifier ceased transmitting.  Was removed from service on 11/13 and repaired at 
CF. Replaced power supply and returned to service on 12/08
Measurements:sgp915rwpwindmomI1.a0:
  • Spectral Width: vert velocity(specw)
  • Ave Time per Average Spectra. Also known as dwell.(spcavetime)
  • Vertical FFT Bandwidth(vband)
  • Delay Time to 1st Gate(dly)
  • Pulse Length(plen)
  • Sample Rate(sampr)
  • Radial Velocity Spectral Resolution(vsr)
  • Number of Pulse Code Bits(pcbits)
  • lon(lon)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Range Gate Spacing(rgs)
  • Interpulse Period(ipp)
  • Pulse Repetition Frequency(prf)
  • lat(lat)
  • Individual Spectrum Integration Time(sitime)
  • Number of valid heights(nheight)
  • Number of Coherent Samples/spectral point(ncoh)
  • Height of Center of First Range Gate(rgf)
  • Rx Bandwidth Switch Code(bswitch)
  • Array of heights for each sample time(height_t)
  • Dummy altitude for Zeb(alt)
  • Beam Number(beam)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • base time(base_time)
  • Mean atmospheric vertical velocity(mdf)
  • Signal to Noise Ratio of the RASS Signal(snr)
  • Height of Center of Last Range Gate(rgl)
  • Height Index(range_gate)
  • Oblique FFT Bandwidth(oband)
  • Time Domain Integration Time(tditime)
  • Time offset of tweaks from base_time(time_offset)
  • elevation(elevation)
sgp915rwptempmomI1.a0:
  • Signal to Noise Ratio of the RASS Signal(snr)
  • lon(lon)
  • Acoustic Spectral Width(sspecw)
  • Time offset of tweaks from base_time(time_offset)
  • Dummy altitude for Zeb(alt)
  • Range Gate Spacing(rgs)
  • base time(base_time)
  • Mean acoustic speed(smdf)
  • Beam 0 virtual temperature(virtual_temp)
  • Sample Rate(sampr)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Mean atmospheric vertical velocity(mdf)
  • Spectral Width: vert velocity(specw)
  • Array of heights for the range gates(height)
  • Signal to Noise Ratio: acoustic(ssnr)
  • lat(lat)
sgp915rwpwindspecI1.a0:
  • Particle radius at logarithmic center of bin(bins)
  • elevation(elevation)
  • Time Domain Integration Time(tditime)
  • Dummy altitude for Zeb(alt)
  • Pulse Repetition Frequency(prf)
  • base time(base_time)
  • Spectral Data (signal strength/freq int)(spc_amp)
  • Height of Center of First Range Gate(rgf)
  • Number of Pulse Code Bits(pcbits)
  • lat(lat)
  • Number of Coherent Samples/spectral point(ncoh)
  • Delay Time to 1st Gate(dly)
  • Sample Rate(sampr)
  • Number of valid heights(nheight)
  • Rx Bandwidth Switch Code(bswitch)
  • Individual Spectrum Integration Time(sitime)
  • Oblique FFT Bandwidth(oband)
  • Height Index(range_gate)
  • Radial Velocity Spectral Resolution(vsr)
  • Range Gate Spacing(rgs)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Pulse Length(plen)
  • Array of heights for each sample time(height_t)
  • Height of Center of Last Range Gate(rgl)
  • lon(lon)
  • Time offset of tweaks from base_time(time_offset)
  • Ave Time per Average Spectra.(spcavetim)
  • Beam Number(beam)
  • Vertical FFT Bandwidth(vband)
  • Interpulse Period(ipp)
sgp915rwpwindconI1.a1:
  • Time Domain Integration Time(tditime)
  • Number of values that passed consensus, beam 4(ncns4)
  • Height Index(range_gate)
  • Beam 1 radial wind speed(vel1)
  • Horizontal wind direction(dir)
  • Number of values that passed consensus, beam 0(ncns0)
  • Number of values that passed consensus, beam 1(ncns1)
  • lon(lon)
  • Number of spectra/ave int, Beam 2(nrec2)
  • Pulse Repetition Frequency(prf)
  • Beam 0 radial wind speed(vel0)
  • Vertical Velocity Spectral Resolution(vvsr)
  • Azimuth of Beam 1(azimuth1)
  • Elevation angle of Beam 0 for WINDS data(elevation0)
  • Horizontal wind speed(spd)
  • Elevation angle of Beam 3 for WINDS data(elevation3)
  • Ave Time per Average Spectra.(spcavetim)
  • Number of values that passed consensus, beam 2(ncns2)
  • Dummy altitude for Zeb(alt)
  • Number of Values Required for Consensus, Beam 1(nrcns1)
  • Range Gate Spacing(rgs)
  • Elevation angle of Beam 2 for WINDS data(elevation2)
  • Interpulse Period(ipp)
  • Beam 4 radial wind speed(vel4)
  • Number of values that passed consensus, beam 3(ncns3)
  • Delay Time to 1st Gate(dly)
  • Array of heights for each sample time(height_p)
  • Elevation angle of Beam 1 for WINDS data(elevation1)
  • Rx Bandwidth Switch Code(bswitch)
  • Sample Rate(sampr)
  • copolar signal to noise ratio(snr1)
  • Height of Center of First Range Gate(rgf)
  • U-component(u_wind)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Number of Values Required for Consensus, Beam 2(nrcns2)
  • Vertical FFT Bandwidth(vband)
  • Signal to Noise Ratio, Beam 0(snr0)
  • Number of Pulse Code Bits(pcbits)
  • Number of Values Required for Consensus, Beam 0(nrcns0)
  • Azimuth of Beam 2(azimuth2)
  • Elevation angle of Beam 4 for WINDS data(elevation4)
  • Number of Values Required for Consensus, Beam 3(nrcns3)
  • Azimuth of Beam 3 for WINDS data(azimuth3)
  • Pulse Length(plen)
  • lat(lat)
  • Oblique Velocity Spectral Resolution(ovsr)
  • Azimuth of Beam 4 for WINDS data(azimuth4)
  • Number of Values Required for Consensus, Beam 4(nrcns4)
  • V-component(v_wind)
  • Number of Coherent Samples/spectral point(ncoh)
  • Signal to Noise Ratio, Beam 3(snr3)
  • Beam 2 radial wind speed(vel2)
  • Oblique FFT Bandwidth(oband)
  • Average Interval(avgint)
  • Beam 3 radial wind speed(vel3)
  • Azimuth of Beam 0(azimuth0)
  • base time(base_time)
  • Height of Center of Last Range Gate(rgl)
  • Number of spectra/ave int, Beam 4(nrec4)
  • Time offset of tweaks from base_time(time_offset)
  • Ave snr*10 level, Beam 2(snr2)
  • Number of spectra/ave int, Beam 1(nrec1)
  • Signal to Noise Ratio, Beam 4(snr4)
  • Individual Spectrum Integration Time(sitime)
  • Number of spectra/ave int, Beam 3(nrec3)
  • Power offset(power)
  • Number of spectra/ave int, Beam 0(nrec0)
  • Number of valid heights(nheight)
sgp915rwptempconI1.a1:
  • Time offset of tweaks from base_time(time_offset)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • base time(base_time)
  • Number of Values that Passed Consensus, Beam 0 Virtual Temperature(ncns_virtual_temp)
  • Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
  • lon(lon)
  • Range Gate Spacing(rgs)
  • Vertical wind velocity(vert_v)
  • Array of heights for the range gates(height)
  • Number of pulses/ave int, Beam 0(nrec)
  • Average Interval(avgint)
  • Sample Rate(sampr)
  • Number of Values Required for Consensus, Beam 0(nrcns)
  • Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
  • Beam 0 virtual temperature(virtual_temp)
  • Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
  • virtual_temp_corr(virtual_temp_corr)
  • Number of Values that Passed Consensus, Corrected Beam 0 Virtual Temperature(ncns_virtual_temp_corr)
  • Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)
sgp915rwptempspecI1.a0:
  • base time(base_time)
  • lat(lat)
  • Particle radius at logarithmic center of bin(bins)
  • Spectral Data (signal strength/freq int)(spc_amp)
  • Dummy altitude for Zeb(alt)
  • Array of heights for the range gates(height)
  • Sample Rate(sampr)
  • Range Gate Spacing(rgs)
  • Time offset of tweaks from base_time(time_offset)
  • lon(lon)

Back To Table of Contents


END OF DATA