TWP/SMET/C3 - Data missing due to Logger Change

All Data from this site are missing during this time period due to a change of the 
collection system, logger and enclosure.  Data resumed after change.

• External voltage(external_voltage)
• lat(lat)
• Time offset of tweaks from base_time(time_offset)
• Precipitation maximum(precip_max)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Battery Voltage(internal_voltage)
• Wind #1 speed minimum(wind1_spd_min)
• Logger panel temperature(logger_temp)
• Wind #2 speed maximum(wind2_spd_max)
• precipitation minimum(precip_min)
• Wind #1 direction standard deviation(wind1_dir_sd)
• Wind #2 speed minimum(wind2_spd_min)
• Wind #1 speed maximum(wind1_spd_max)
• Mean Air Temperature or Hardware Error(temp_mean)
• Temperature maximum(temp_max)
• Vapor pressure mean(vappress_mean)
• Barometric Pressure(atmos_pressure)
• Vapor pressure standard deviation(vappress_sd)
• Mean Relative Humidity(relh_mean)
• Relative humidity maximum(relh_max)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #2 direction vector average(wind2_dir_vec_avg)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Relative humidity minimum(relh_min)
• Bit data. See details.(bit_data)
• Precipitation mean(precip_mean)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• base time(base_time)
• Temperature minimum(temp_min)
• Dummy altitude for Zeb(alt)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Precipitation standard deviation(precip_sd)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• lon(lon)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Wind #2 speed standard deviation(wind2_spd_sd)
• Std Dev of Air Temperature(temp_sd)

TWP/SMET/C3 - Reprocess: Tipping bucket rain gauge added

A tipping bucket rain gauge was added to the SMET suite of instruments effective 20060926. 
 Two new variables (count and rain amount) were added at the end of the twpsmet60sC1.b1 
datastream.  When reprocessing of this datastream occurs these variables will be added 
with -9999 (missing) as the value for dates prior to gauge installation.

• base time(base_time)