TWP/SMET/C1 - Wind Direction alignment method

During RESET10 we discovered a problem with wind direction from WIND1 (upper
anemometer).  During RESET8, WIND1 was corrected by rotating the alignment
ring instead of the anemometer.  This resulted in a better agreement between
the 2 anemometers, but is not the correct way to align an anemometer. The
alignment ring was readjusted for true north and the anemometer reset in
the proper slot (the original problem).

• Wind #1 direction standard deviation(wind1_dir_sd)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #1 speed vector average(wind1_spd_vec_avg)

• null(Raw data stream - documentation not supported)

• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 direction standard deviation(wind1_dir_sd)

TWP/SMET/C1 - Incorrect calibration for ARCS1 Wind speed

On 23 OCT 99, during Reset 8, an incorrect slope of was entered for the 
upper, windspeed1, wind speed sensor resulting in a 1% overestimate of
the wind speed.  The correct calibration was entered on 1 APR 2000 during
RESET 10.

• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• Wind #1 speed maximum(wind1_spd_max)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #1 speed minimum(wind1_spd_min)
• Wind #1 speed vector average(wind1_spd_vec_avg)

• null(Raw data stream - documentation not supported)

• null(Raw data stream - documentation not supported)

• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 speed maximum(wind1_spd_max)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #1 speed minimum(wind1_spd_min)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)

TWP/SMET/C1 - precip, wind, temperature

On 10/23/01 from 4:45 to 6:45 precipitation, wind, and temperature measurements were 
directly affected by RESET14 visit activities.

• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• Wind #2 speed minimum(wind2_spd_min)
• Precipitation standard deviation(precip_sd)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #2 speed standard deviation(wind2_spd_sd)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Wind #2 speed maximum(wind2_spd_max)
• Temperature maximum(temp_max)
• Precipitation mean(precip_mean)
• Wind #1 speed maximum(wind1_spd_max)
• Mean Air Temperature or Hardware Error(temp_mean)
• Std Dev of Air Temperature(temp_sd)
• precipitation minimum(precip_min)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #1 direction standard deviation(wind1_dir_sd)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Precipitation maximum(precip_max)
• Temperature minimum(temp_min)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Wind #2 direction vector average(wind2_dir_vec_avg)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 speed minimum(wind1_spd_min)

• Precipitation mean(precip_mean)
• Temperature minimum(temp_min)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #2 speed maximum(wind2_spd_max)
• Precipitation maximum(precip_max)
• Wind #1 direction standard deviation(wind1_dir_sd)
• Mean Air Temperature or Hardware Error(temp_mean)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Precipitation standard deviation(precip_sd)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• Temperature maximum(temp_max)
• Wind #2 speed minimum(wind2_spd_min)
• precipitation minimum(precip_min)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• Wind #1 speed maximum(wind1_spd_max)
• Std Dev of Air Temperature(temp_sd)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #2 direction vector average(wind2_dir_vec_avg)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #2 speed standard deviation(wind2_spd_sd)
• Wind #1 speed minimum(wind1_spd_min)

TWP/SMET/C1 - Sensor replacement

On 10/24/01 from 00:40 to 01:00 the T/RH probe was being replaced.

• Relative humidity minimum(relh_min)
• Mean Air Temperature or Hardware Error(temp_mean)
• Mean Relative Humidity(relh_mean)
• Std Dev of Air Temperature(temp_sd)
• Relative humidity maximum(relh_max)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Temperature minimum(temp_min)
• Temperature maximum(temp_max)

• Temperature minimum(temp_min)
• Relative humidity maximum(relh_max)
• Mean Relative Humidity(relh_mean)
• Std Dev of Air Temperature(temp_sd)
• Mean Air Temperature or Hardware Error(temp_mean)
• Relative humidity minimum(relh_min)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Temperature maximum(temp_max)

TWP/C1 - Incorrect elevation reported in Manus Data

(From Bill Clements) We have been using 6m MSL as the station
elevation of Momote (Manus).  This was based on information
posted near the station barometer in the Momote Weather Service
Office.  It turns out that the official WMO station elevation
for Momote is 4m MSL and the upper air elevation is 5m MSL.

All Manus instruments except the sonde station are at 4m MSL.
The sonde launching station is at 5m MSL.

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)

• Dummy altitude for Zeb(alt)

TWP/MWR/C1 - wrong azimuth

The MWR was initially installed at an azimuth angle defined as 180 degrees but the value 
in the configuration file was not changed from the default of 0 degrees. In examining 
photos taken during the installation of the AWS tower, I noticed that the MWR was rotated 
opposite the normal orientation. The value in the configuration file was changed to reflect 
the actual azimuth of the instrument.

• Actual Azimuth(actaz)

TWP/SMET/C1 - RESET14 activities

RESET14 activities may have affected data in subtle ways during this
period.

• Wind #2 speed standard deviation(wind2_spd_sd)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Temperature maximum(temp_max)
• Precipitation mean(precip_mean)
• Std Dev of Air Temperature(temp_sd)
• precipitation minimum(precip_min)
• Relative humidity maximum(relh_max)
• Precipitation maximum(precip_max)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Vapor pressure mean(vappress_mean)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• Wind #2 speed minimum(wind2_spd_min)
• Precipitation standard deviation(precip_sd)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Wind #2 speed maximum(wind2_spd_max)
• Barometric Pressure(atmos_pressure)
• Relative humidity minimum(relh_min)
• Wind #1 speed maximum(wind1_spd_max)
• Vapor pressure standard deviation(vappress_sd)
• Mean Air Temperature or Hardware Error(temp_mean)
• Mean Relative Humidity(relh_mean)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #1 direction standard deviation(wind1_dir_sd)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Temperature minimum(temp_min)
• Wind #2 direction vector average(wind2_dir_vec_avg)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 speed minimum(wind1_spd_min)

• Wind #1 speed vector average(wind1_spd_vec_avg)
• Precipitation maximum(precip_max)
• Wind #1 direction standard deviation(wind1_dir_sd)
• Mean Air Temperature or Hardware Error(temp_mean)
• Temperature maximum(temp_max)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• Wind #1 speed maximum(wind1_spd_max)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Relative humidity minimum(relh_min)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Wind #1 speed minimum(wind1_spd_min)
• Precipitation mean(precip_mean)
• Temperature minimum(temp_min)
• Vapor pressure standard deviation(vappress_sd)
• Wind #2 speed maximum(wind2_spd_max)
• Barometric Pressure(atmos_pressure)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Precipitation standard deviation(precip_sd)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• Wind #2 speed minimum(wind2_spd_min)
• precipitation minimum(precip_min)
• Relative humidity maximum(relh_max)
• Mean Relative Humidity(relh_mean)
• Vapor pressure mean(vappress_mean)
• Std Dev of Air Temperature(temp_sd)
• Wind #2 direction vector average(wind2_dir_vec_avg)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Wind #2 speed standard deviation(wind2_spd_sd)

TWP/SMET/C1 - Negative rainfall rates

Due to limitations of the Zeno dataloggers all voltage measurements
from the optical rain gauge (ORG) were converted to rainfall rates. 
This resulted in negative values for rain rates.  Any value below 0.10 mm/hr should be 
considered to be 0 mm/hr.  New dataloggers 
alleviated this problem.  New loggers were installed 03/09/2004 @ 2243 GMT.

• Precipitation mean(precip_mean)
• Precipitation maximum(precip_max)
• Precipitation standard deviation(precip_sd)
• precipitation minimum(precip_min)

TWP/SMET/C1 - Reprocess: Barometric Data Changed from hPa to kPa

Barometric pressure data was converted from hPa to kPa in order to standardize the 
measurement units among ARM sites and to conform to accepted standard units determined by the 
scientific community.

• Barometric Pressure(atmos_pressure)

TWP/SMET/C1 - Reprocess: Tipping bucket rain gauge added

A tipping bucket rain gauge was added to the TWP.C1 SMET suite of instruments on 20061017. 
 Effective 20060926, two new variables (count and rain amount) were added to the end of 
the twpsmet60sC1.b1 datastream.  Between 9/26 and 10/17, the data for these two variables 
are filled with zeros.  Users should not use the data during this period as the zeros 
are not representative of the rain fall at the site.  When reprocessing of this datastream 
occurs these variables will be added for the 19961009-20060926 and data from 
19961009-20061017 will be filled with -9999 (missing).

• base time(base_time)

TWP/MWR/C1 - Missing data

Data are missing and unrecoverable.

• (tknd)
• 31.4 GHz blackbody(bb31)
• Mixer kinetic (physical) temperature(tkxc)
• 31.4 GHz sky signal(sky31)
• base time(base_time)
• Sky brightness temperature at 31.4 GHz(tbsky31)
• Dummy altitude for Zeb(alt)
• Actual elevation angle(actel)
• Temperature correction coefficient at 23.8 GHz(tc23)
• Temperature correction coefficient at 31.4 GHz(tc31)
• IR Brightness Temperature(ir_temp)
• 31.4 GHz blac2body+noise injection signal(bbn31)
• Water on Teflon window (1=WET, 0=DRY)(wet_window)
• MWR column precipitable water vapor(vap)
• 23.8 GHz blackbody+noise injection signal(bbn23)
• Ambient temperature(tkair)
• Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
• Sky brightness temperature at 23.8 GHz(tbsky23)
• Time offset of tweaks from base_time(time_offset)
• Averaged total liquid water along LOS path(liq)
• Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
• Sky Infra-Red Temperature(sky_ir_temp)
• Actual Azimuth(actaz)
• 23.8 GHz Blackbody signal(bb23)
• 23.8 GHz sky signal(sky23)
• lon(lon)
• Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
• Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
• Blackbody kinetic temperature(tkbb)
• lat(lat)