TWP/AERI/C2 - Data Loss due to Communication Problem

The spectrometer was periodically unable to transfer data to the computer. When this 
occurred, the data was deleted and lost as new data filled the spectrometer's memory. All 
existing data in this time period is good. However, much data is missing. For example, half 
of channel 1 and three-quarters of channel 2 may be missing. The DSP card was failing 
intermittantly and the problem was resolved when the card was replaced.

• Ambient blackbody temperature(ABBbottomTemp)
• lat(lat)
• Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
  indicative of front end air flow.(frontEndFanAirTempDiff)
• Observation date(dateYYMMDD)
• Number of views in a sequence(sceneMirPosCount)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Rain sensor analog output: the rain sensor is located inside the hatch near the
  sky aperture and is used to flag the critical condition of rain falling on
  the AERI s(rainSensorIntensity)
• Radiance standard deviation during ambient blackbody view averaged over
  (2510_2515 cm-1)(ABBviewStdDevRadiance2510_2515)
• Duration of scene view(sceneViewDuration)
• Detector temperature sensed via diode near detector(detectorTemp)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Ambient air temperature near the interferometer(airNearInterferometerTemp)
• Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
• Limit applied to SWskyNEN in determination of SWskyNENacceptable(SWskyNENlimit)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Limit applied to HBBtempDrift in determination of HBBstable flag(HBBtempDriftLimit)
• Number of terms used in finite field of view correction(numberOfTerms)
• Character string containing instrument name(instrumentUnitNumber)
• Weight factor for bottom used in calculating ambient blackbody temperature
  average(ABBbottomTempWeight)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
• Hot blackbody temperature - apex(HBBapexTemp)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Radiance standard deviation during hot blackbody view averaged over (985_990
  cm-1)(HBBviewStdDevRadiance985_990)
• Radiance standard deviation during ambient blackbody view averaged over
  (2282_2287 cm-1)(ABBviewStdDevRadiance2282_2287)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Radiance standard deviation during hot blackbody view averaged over (2295_2300
  cm-1)(HBBviewStdDevRadiance2295_2300)
• Radiance standard deviation during ambient blackbody view averaged over
  (2295_2300 cm-1)(ABBviewStdDevRadiance2295_2300)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
• Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
• base time(base_time)
• Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
• Weight factor for apex used in calculating ambient blackbody temperature average(ABBapexTempWeight)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• xxx(dataAvailable)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm-1(SWskyNEN)
• Radiance standard deviation during ambient blackbody view averaged over (675_680
  cm-1)(ABBviewStdDevRadiance675_680)
• Blackbody cavity geometry factor(BBcavityFactor)
• Size of buffer holding initial spectrum(originalInterferogramSize)
• Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
• Time offset of tweaks from base_time(time_offset)
• Imaginary radiance during sky view averaged over (2295_2300 cm-1)(skyViewImaginaryRadiance2295_2300)
• AERI instrument data channel number(channelNumber)
• Factor used to convert single-scan noise to two-minute equivalent(twoMinuteNoiseEstimateFactor)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Corrective offset for final hot blackbody average temperature(HBBtempOffset)
• Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
• Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
• Radiance standard deviation during hot blackbody view averaged over (700_705
  cm-1)(HBBviewStdDevRadiance700_705)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
• Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Weight factor for apex used in calculating hot blackbody temperature average(HBBapexTempWeight)
• Limit applied to LWskyNEN in determination of LWskyNENacceptable(LWskyNENlimit)
• Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
• Interferometer front end fan airflow heated temperature: used with unheated
  temperature as measure of airflow.(frontEndFanAirHeatedTemp)
• Original laser wavenumber assumed for this instrument(originalLaserWavenumber)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• lon(lon)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
• Radiance standard deviation during ambient blackbody view averaged over (700_705
  cm-1)(ABBviewStdDevRadiance700_705)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Julian Day including day and fraction of day(JulianDay)
• Time at center of AERI sky observation period(Time_UTC_hours)
• Dummy altitude for Zeb(alt)
• Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
• Radiance standard deviation during hot blackbody view averaged over (2282_2287
  cm-1)(HBBviewStdDevRadiance2282_2287)
• Ambient air temperature at hatch opening(outsideAirTemp)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Version number of Operational Software(systemReleaseNumber)
• Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Radiance standard deviation during hot blackbody view averaged over (675_680
  cm-1)(HBBviewStdDevRadiance675_680)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Imaginary radiance during sky view averaged over (700_705 cm-1)(skyViewImaginaryRadiance700_705)
• Relative Humidity measured in the Interferometer Enclosure(interferometerEnclosureRelativeHumidity)
• Observation longitude(Longitude)
• Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
• Interferometer window temperature measured on the outside of the aluminum window
  flange(interferometerWindowTemp)
• AERI ingest computer temperature measured at back panel of computer(computerTemp)
• Field of view half angle used in finite FOV correction(FFOVhalfAngle)
• Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
• Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Observation latitude(Latitude)
• Size of buffer holding expanded spectrum before interpolation(expandedInterferogramSize)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
• Imaginary radiance during sky view averaged over (2282_2287 cm-1)(skyViewImaginaryRadiance2282_2287)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
• Time (HHMMSS)(timeHHMMSS)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Interferometer front end fan airflow unheated temperature: used with heated
  temperature as measure of airflow.(frontEndFanAirUnheatedTemp)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• time(time)
• Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
• Radiance standard deviation during hot blackbody view averaged over (2510_2515
  cm-1)(HBBviewStdDevRadiance2510_2515)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Instrument scene mirror position identifier(sceneMirrorPosition)
• Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Observation Altitude(Altitude)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Imaginary radiance during sky view averaged over (675_680 cm-1)(skyViewImaginaryRadiance675_680)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• AERI instrument unit serial number(AERIunitNumber)
• Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
• Stirling cycle cooler current(coolerCurrent)
• Sun sensor analog output: The sun sensor has a view angle to the sky slightly
  larger than the interferometer FOV and is aligned to the interferometer
  line-of-sight. I(sunSensorIntensity)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Number of complete (forward+backward) interferogram scans in sample average(coadditionsCount)
• Relative humidity measured in the optics compartment atop the interferometer.(opticsCompartmentRelativeHumidity)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the sky view(HBBtempDrift)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Spare temperature sensor (location TBD)(spareTemp)

• Raw data stream - documentation not supported(raw)

• Rain sensor analog output: the rain sensor is located inside the hatch near the
  sky aperture and is used to flag the critical condition of rain falling on
  the AERI s(rainSensorIntensity)
• Wave number in reciprocal centimeters(wnumsum14)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• Wave number in reciprocal centimeters(wnumsum1)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Wave number in reciprocal centimeters(wnumsum2)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
• Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Wave number in reciprocal centimeters(wnumsum6)
• lon(lon)
• Time (HHMMSS)(timeHHMMSS)
• Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
• Wave number in reciprocal centimeters(wnumsum3)
• Wave number in reciprocal centimeters(wnumsum12)
• Wave number in reciprocal centimeters(wnumsum13)
• Wave number in reciprocal centimeters(wnumsum4)
• Wave number in reciprocal centimeters(wnumsum11)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENestimateNo2Ch1)
• Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
• AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENestimateNo2Ch2)
• Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
  indicative of front end air flow.(frontEndFanAirTempDiff)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Dummy altitude for Zeb(alt)
• Wave number in reciprocal centimeters(wnumsum7)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENestimateNo1Ch1)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
• Julian Day including day and fraction of day(JulianDay)
• Wave number in reciprocal centimeters(wnumsum5)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
• AERI instrument data channel number(channelNumber)
• Sun sensor analog output: The sun sensor has a view angle to the sky slightly
  larger than the interferometer FOV and is aligned to the interferometer
  line-of-sight. I(sunSensorIntensity)
• base time(base_time)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Wave number in reciprocal centimeters(wnumsum8)
• Observation latitude(Latitude)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
• time(time)
• Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
• Wave number in reciprocal centimeters(wnumsum9)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
• Version number of Operational Software(systemReleaseNumber)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Observation date(dateYYMMDD)
• Time offset of tweaks from base_time(time_offset)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the sky view(HBBtempDrift)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Observation longitude(Longitude)
• Character string containing instrument name(instrumentUnitNumber)
• AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
• Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
• xxx(dataAvailable)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENestimateNo1Ch2)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
• AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectralAveragesCh2)
• lat(lat)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Wave number in reciprocal centimeters(wnumsum10)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm-1(SWskyNEN)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Observation Altitude(Altitude)
• AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)
• Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
• Time at center of AERI sky observation period(Time_UTC_hours)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectralAveragesCh2)
• Duration of scene view(sceneViewDuration)
• Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
• AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectralAveragesCh1)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• AERI instrument unit serial number(AERIunitNumber)
• Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)

• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• lat(lat)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Time offset of tweaks from base_time(time_offset)
• AERI instrument data channel number(channelNumber)
• base time(base_time)
• Observation latitude(Latitude)
• lon(lon)
• Version number of Operational Software(systemReleaseNumber)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Mean of radiance spectra ensemble(mean_rad)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Time (HHMMSS)(timeHHMMSS)
• AERI instrument unit serial number(AERIunitNumber)
• Character string containing instrument name(instrumentUnitNumber)
• Time at center of AERI sky observation period(Time_UTC_hours)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Dummy altitude for Zeb(alt)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Observation Altitude(Altitude)
• Julian Day including day and fraction of day(JulianDay)
• Observation longitude(Longitude)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• Observation date(dateYYMMDD)
• Duration of scene view(sceneViewDuration)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• time(time)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Wave number(wnum)

• Version number of Operational Software(systemReleaseNumber)
• Time (HHMMSS)(timeHHMMSS)
• Julian Day including day and fraction of day(JulianDay)
• time(time)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• AERI instrument unit serial number(AERIunitNumber)
• Mean of radiance spectra ensemble(mean_rad)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• lon(lon)
• lat(lat)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Wave number(wnum)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Character string containing instrument name(instrumentUnitNumber)
• Time offset of tweaks from base_time(time_offset)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Duration of scene view(sceneViewDuration)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Observation Altitude(Altitude)
• Observation date(dateYYMMDD)
• Dummy altitude for Zeb(alt)
• base time(base_time)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Time at center of AERI sky observation period(Time_UTC_hours)
• Observation longitude(Longitude)
• Observation latitude(Latitude)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• AERI instrument data channel number(channelNumber)