| Measurements: | shbgndmfrC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
shbmfrsrC1.a1: - Dummy altitude for Zeb(alt)
- Direct Normal Irradiance, Uncalibrated Silicon Detector, NIMFR(direct_norm_broadband)
- MFRSR Detector Temperature(mfrsr_temp)
- Diffuse Hemispheric Irradiance, MFRSR(diffuse_hemisp_narrowband)
- Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- base time(base_time)
- Diffuse Hemispheric Broadband Irradiance (Approximate), MFRSR(diffuse_hemisp_broadband)
- Time offset of tweaks from base_time(time_offset)
- lat(lat)
- lon(lon)
- Hemispheric Irradiance, MFRSR(hemisp_narrowband)
- Data Logger Supply Voltage(logger_volt)
- Fields flagged by callang: 0 = No Flag\n,(callang_flags)
- Direct Normal Irradiance, NIMFR(direct_norm_narrowband)
- total_hemisp_broadband
shbnimfrC1.a0: - Direct Normal Irradiance, NIMFR(direct_norm_narrowband)
- Detector Temperature(mfr_temp)
- base time(base_time)
- lat(lat)
- Time offset of tweaks from base_time(time_offset)
- Source Consensus Winds File(raw_file)
- Dummy altitude for Zeb(alt)
- Data Logger Supply Voltage(logger_volt)
- lon(lon)
- Direct Normal Irradiance, Uncalibrated Silicon Detector, NIMFR(direct_norm_broadband)
shbskyrad60sC1.b1: - Dummy altitude for Zeb(alt)
- PIR1 unshaded mean(pir1_mean)
- Logger panel temperature(logger_temp)
- lon(lon)
- PSP shaded minimum(psps_min)
- PSP shaded standard deviation(psps_sd)
- NIP minimum(nip_min)
- GPS raw data filename(filename)
- NIP mean(nip_mean)
- UVB mean(uvb_mean)
- PSP1 unshaded standard deviation(psp1_sd)
- NIP standard deviation(nip_sd)
- Battery Voltage(internal_voltage)
- PIR shaded standard deviation(pirs_sd)
- PIR1 unshaded minimum(pir1_min)
- base time(base_time)
- IRT1 mean(irt1_mean)
- PIR1 unshaded maximum(pir1_max)
- Time offset of tweaks from base_time(time_offset)
- UVB maximum(uvb_max)
- PIR shaded minimum(pirs_min)
- IRT1 maximum(irt1_max)
- PSP shaded mean(psps_mean)
- PSP1 unshaded minimum(psp1_min)
- PIR shaded maximum(pirs_max)
- lat(lat)
- PIR shaded mean(pirs_mean)
- PSP shaded maximum(psps_max)
- UVB standard deviation(uvb_sd)
- Bit data. See details.(bit_data)
- NIP maximum(nip_max)
- PSP1 unshaded maximum(psp1_max)
- UVB minimum(uvb_min)
- PIR1 unshaded standard deviation(pir1_sd)
- IRT1 standard deviation(irt1_sd)
- External voltage(external_voltage)
- PSP1 unshaded mean(psp1_mean)
- IRT1 minimum(irt1_min)
shbvceil25kC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
shbnimfrC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
shbgndmfrC1.b1: - Dummy altitude for Zeb(alt)
- Source Consensus Winds File(raw_file)
- Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- base time(base_time)
- lat(lat)
- Data Logger Supply Voltage(logger_volt)
- Broadband Upwelling Hemispheric Irradiance, Uncalibrated Silicon Detector,
GNDMFR(up_hemisp_broadband) - lon(lon)
- Upwelling Hemispheric Irradiance, GNDMFR(up_hemisp_narrowband)
- Time offset of tweaks from base_time(time_offset)
- Detector Temperature(mfr_temp)
- Fields flagged by callang: 0 = No Flag\n,(callang_flags)
shbgndrad60sC1.a1: - PIR1 unshaded maximum(pir1_max)
- PSP1 unshaded maximum(psp1_max)
- External voltage(external_voltage)
- GPS raw data filename(filename)
- base time(base_time)
- PIR1 unshaded standard deviation(pir1_sd)
- NET mean(net_mean)
- Dummy altitude for Zeb(alt)
- Battery Voltage(internal_voltage)
- NET standard deviation(net_sd)
- Bit data. See details.(bit_data)
- PSP1 unshaded mean(psp1_mean)
- Net Radiation, Maxima(net_max)
- IRT1 maximum(irt1_max)
- PSP1 unshaded standard deviation(psp1_sd)
- IRT1 standard deviation(irt1_sd)
- lat(lat)
- PIR1 unshaded mean(pir1_mean)
- PSP1 unshaded minimum(psp1_min)
- IRT1 minimum(irt1_min)
- Logger panel temperature(logger_temp)
- PIR1 unshaded minimum(pir1_min)
- IRT1 mean(irt1_mean)
- Time offset of tweaks from base_time(time_offset)
- lon(lon)
- Net Radiation, Minima(net_min)
shbgndmfrC1.a0: - Upwelling Hemispheric Irradiance, GNDMFR(up_hemisp_narrowband)
- Data Logger Supply Voltage(logger_volt)
- base time(base_time)
- Source Consensus Winds File(raw_file)
- Detector Temperature(mfr_temp)
- Time offset of tweaks from base_time(time_offset)
- Broadband Upwelling Hemispheric Irradiance, Uncalibrated Silicon Detector,
GNDMFR(up_hemisp_broadband) - lat(lat)
- Dummy altitude for Zeb(alt)
- lon(lon)
shbskyrad60sC1.a1: - UVB maximum(uvb_max)
- Battery Voltage(internal_voltage)
- lat(lat)
- PSP1 unshaded standard deviation(psp1_sd)
- PSP1 unshaded mean(psp1_mean)
- NIP minimum(nip_min)
- PIR1 unshaded minimum(pir1_min)
- IRT1 standard deviation(irt1_sd)
- NIP standard deviation(nip_sd)
- PIR shaded maximum(pirs_max)
- IRT1 minimum(irt1_min)
- PIR shaded standard deviation(pirs_sd)
- UVB mean(uvb_mean)
- PIR1 unshaded maximum(pir1_max)
- PSP shaded standard deviation(psps_sd)
- PIR shaded mean(pirs_mean)
- UVB standard deviation(uvb_sd)
- NIP maximum(nip_max)
- base time(base_time)
- PSP1 unshaded minimum(psp1_min)
- PSP shaded maximum(psps_max)
- PIR1 unshaded mean(pir1_mean)
- PSP shaded mean(psps_mean)
- Logger panel temperature(logger_temp)
- Time offset of tweaks from base_time(time_offset)
- PSP1 unshaded maximum(psp1_max)
- External voltage(external_voltage)
- PIR1 unshaded standard deviation(pir1_sd)
- Dummy altitude for Zeb(alt)
- IRT1 maximum(irt1_max)
- lon(lon)
- IRT1 mean(irt1_mean)
- Bit data. See details.(bit_data)
- GPS raw data filename(filename)
- PSP shaded minimum(psps_min)
- UVB minimum(uvb_min)
- PIR shaded minimum(pirs_min)
- NIP mean(nip_mean)
shbgndrad60sC1.b1: - PIR1 unshaded mean(pir1_mean)
- Dummy altitude for Zeb(alt)
- lon(lon)
- PIR1 unshaded maximum(pir1_max)
- Bit data. See details.(bit_data)
- IRT1 minimum(irt1_min)
- Net Radiation, Minima(net_min)
- PSP1 unshaded standard deviation(psp1_sd)
- Logger panel temperature(logger_temp)
- PSP1 unshaded minimum(psp1_min)
- IRT1 mean(irt1_mean)
- NET mean(net_mean)
- base time(base_time)
- PIR1 unshaded minimum(pir1_min)
- PSP1 unshaded maximum(psp1_max)
- Battery Voltage(internal_voltage)
- lat(lat)
- IRT1 standard deviation(irt1_sd)
- Net Radiation, Maxima(net_max)
- IRT1 maximum(irt1_max)
- PIR1 unshaded standard deviation(pir1_sd)
- GPS raw data filename(filename)
- PSP1 unshaded mean(psp1_mean)
- Time offset of tweaks from base_time(time_offset)
- External voltage(external_voltage)
- NET standard deviation(net_sd)
shbnimfrC1.a1: - Fields flagged by callang: 0 = No Flag\n,(callang_flags)
- lon(lon)
- base time(base_time)
- Dummy altitude for Zeb(alt)
- Direct Normal Irradiance, NIMFR(direct_norm_narrowband)
- Direct Normal Irradiance, Uncalibrated Silicon Detector, NIMFR(direct_norm_broadband)
- Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- Data Logger Supply Voltage(logger_volt)
- lat(lat)
- Source Consensus Winds File(raw_file)
- Detector Temperature(mfr_temp)
- Time offset of tweaks from base_time(time_offset)
shbgpsC1.a1: - Roll reported by GPS(GPS_roll)
- Hemisphere (E or W) for longitude reported by GPS(GPS_longitude_hemisphere)
- Attitude phase measurement rms error(GPS_att_phase_meas_error)
- Dummy altitude for Zeb(alt)
- Satellite SNR\n,(satellite_SNR)
- Hemisphere (N or S) for latitude reported by GPS(GPS_latitude_hemisphere)
- Pitch reported by GPS(GPS_pitch)
- Attitude reset flag 0 is good, 1 is bad(GPS_att_reset_flag)
- Satellite PRN number(PRN_number)
- lon(lon)
- base time(base_time)
- Latitude reported by GPS(GPS_latitude)
- Satellite elevation(satellite_elevation)
- Satellite usable (U=usable -=not usable)(satellite_usable_flag)
- GPS raw data filename(filename)
- Attitude baseline length measurement rms error(GPS_att_baseline_meas_error)
- Satellite azimuth(satellite_azimuth)
- Altitude reported by GPS(GPS_altitude)
- Heading reported by GPS(GPS_heading)
- lat(lat)
- Longitude reported by GPS(GPS_longitude)
- Time offset of tweaks from base_time(time_offset)
- UTC time reported by GPS(GPS_UTC_time)
- Number of tracked satellites(num_tracked_satellites)
shbmwrlosC1.b1: - base time(base_time)
- MWR column precipitable water vapor(vap)
- Actual elevation angle(actel)
- lon(lon)
- lat(lat)
- Time offset of tweaks from base_time(time_offset)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- Averaged total liquid water along LOS path(liq)
- Sky brightness temperature at 23.8 GHz(tbsky23)
- Dummy altitude for Zeb(alt)
- Sky brightness temperature at 31.4 GHz(tbsky31)
- Actual Azimuth(actaz)
- IR Brightness Temperature(ir_temp)
shbmwrtipC1.a1: - 23.8 GHz calibration curve slope(gain23)
- lon(lon)
- Actual elevation angle(actel)
- Blackbody temperature 2(tkbb2)
- 31.4 GHz blackbody(bb31)
- 31.4 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave31)
- IR Brightness Temperature(ir_temp)
- 23.8 GHz Blackbody signal(bb23)
- Tip configuration number(tipn)
- 23.8 GHz goodness-of-fit coefficient(r23)
- Actual Azimuth(actaz)
- 31.4 GHz calibration curve slope(gain31)
- 23.8 GHz blackbody+noise injection signal(bbn23)
- 31.4 GHz goodness-of-fit coefficient(r31)
- Dummy altitude for Zeb(alt)
- 23.8 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave23)
- Blackbody temperature 1(tkbb1)
- Time offset of tweaks from base_time(time_offset)
- 23.8 GHz sky signal+noise injection signal(tipskynd23)
- lat(lat)
- 31.4 GHz calibration curve offset(tbzenith31)
- 31.4 GHz sky signal(tipsky31)
- 23.8 GHz calibration curve offset(tbzenith23)
- 23.8 GHz sky signal(tipsky23)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- 31.4 GHz noise diode calib (injection temp) at Tkxc(ndiode31)
- 23.8 GHz noise diode calib (injection temp) at Tkxc(ndiode23)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- Airmass value(airm)
- 31.4 GHz sky signal+noise injection signal(tipskynd31)
- 23.8 GHz blackbody signal(tipbb23)
- 31.4 GHz blackbody signal(tipbb31)
- base time(base_time)
- Mixer kinetic (physical) temperature(tkxc)
shbaerich1C1.a1: - lon(lon)
- lat(lat)
- Version number of Operational Software(systemReleaseNumber)
- BB Support Structure Temperature(BBsupportStructureTemp)
- AERI instrument unit serial number(AERIunitNumber)
- Time at center of AERI sky observation period(Time)
- Wave number(wnum)
- Ambient temperature used in calibration(calibrationAmbientTemp)
- Observation Altitude(Altitude)
- Maximum departure from ideal of the mirror position over the course of all
contributing views. Typically two hot, two ambient, and one scene view are
examine(sceneMirPosEncoderMaxDrift) - Julian Day including day and fraction of day(JulianDay)
- Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
- Duration of scene view(sceneViewDuration)
- Time (HHMMSS)(timeHHMMSS)
- Observation longitude(Longitude)
- Ambient air temperature at hatch opening(outsideAirTemp)
- Observation latitude(Latitude)
- Dummy altitude for Zeb(alt)
- AERI instrument data channel number(channelNumber)
- Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- wavenumbers for standard deviation of radiance spectra(wnum2)
- Time offset of tweaks from base_time(time_offset)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Scene mirror view angle in non-negative degrees, measured clockwise looking into
interferometer window.(sceneMirrorAngle) - Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
- Character string containing instrument name(instrumentUnitNumber)
- Logical flag indicating that a data record is missing (true/false(missingDataFlag)
- base time(base_time)
- Observation date(dateYYMMDD)
- Mean of radiance spectra ensemble(mean_rad)
- Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
shbgpsC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
shbnimfrC1.b1: - lon(lon)
- Detector Temperature(mfr_temp)
- Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- Direct Normal Irradiance, NIMFR(direct_norm_narrowband)
- Fields flagged by callang: 0 = No Flag\n,(callang_flags)
- Data Logger Supply Voltage(logger_volt)
- base time(base_time)
- Time offset of tweaks from base_time(time_offset)
- Direct Normal Irradiance, Uncalibrated Silicon Detector, NIMFR(direct_norm_broadband)
- lat(lat)
- Source Consensus Winds File(raw_file)
- Dummy altitude for Zeb(alt)
shbaerisummaryC1.a1: - Wave number in reciprocal centimeters(wnumsum10)
- Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
- AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENEstimateNo1Ch2)
- Observation Altitude(Altitude)
- Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
- Wave number in reciprocal centimeters(wnumsum14)
- Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
- Time at center of AERI sky observation period(Time)
- Sun sensor analog output: The sun sensor has a view angle to the sky slightly
larger than the interferometer FOV and is aligned to the interferometer
line-of-sight. I(sunSensorIntensity) - Wave number in reciprocal centimeters(wnumsum12)
- Duration of scene view(sceneViewDuration)
- Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
- Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
- Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
- Wave number in reciprocal centimeters(wnumsum1)
- AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectraAveragesCh2)
- Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
- Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
- Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
- Wave number in reciprocal centimeters(wnumsum5)
- Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
- xxx(dataAvailable)
- AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectraAveragesCh1)
- Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
- Julian Day including day and fraction of day(JulianDay)
- AERI instrument data channel number(channelNumber)
- The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
centered on the sky view(HBBtempDrift) - Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
- Rain sensor analog output: the rain sensor is located inside the hatch near the
sky aperture and is used to flag the critical condition of rain falling on
the AERI s(rainSensorIntensity) - Characteristic value representing overall longwave channel responsivity(LWresponsivity)
- AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
- AERI instrument unit serial number(AERIunitNumber)
- Wave number in reciprocal centimeters(wnumsum7)
- Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
- Wave number in reciprocal centimeters(wnumsum9)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
- Maximum departure from ideal of the mirror position over the course of all
contributing views. Typically two hot, two ambient, and one scene view are
examine(sceneMirPosEncoderMaxDrift) - Ambient temperature used in calibration(calibrationAmbientTemp)
- Logical flag indicating whether longwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using LWskyNEN and
LWskyNENlimit.(LWskyNENacceptable) - AERI SW Scene Variability Spectral Averages (Ch2)(SkyVariabilityAveragesCh2)
- AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENEstimateNo2Ch1)
- The noise equivalent radiance observed in the shortwave channel during a sky
view at 2500 cm-1(SWskyNEN) - AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
- Logical flag indicating whether shortwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using SWskyNEN and
SWskyNENlimit.(SWskyNENacceptable) - Wave number in reciprocal centimeters(wnumsum3)
- AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENEstimateNo1Ch1)
- Wave number in reciprocal centimeters(wnumsum2)
- Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
- AERI LW Scene Variability Spectral Averages (Ch1)(SkyVariabilityAveragesCh1)
- Wave number in reciprocal centimeters(wnumsum11)
- Dummy altitude for Zeb(alt)
- Longwave elevated air brightness temperature from radiance average (700_705
cm-1)(elevatedLayerAirTemp700_705) - The noise equivalent radiance observed in the longwave channel during a sky view
at 1000 cm-1(LWskyNEN) - Wave number in reciprocal centimeters(wnumsum13)
- Observation longitude(Longitude)
- Ambient air temperature at hatch opening(outsideAirTemp)
- AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
- Version number of Operational Software(systemReleaseNumber)
- Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
- Shortwave elevated air brightness temperature from radiance average (2282_2287
cm-1)(elevatedLayerAirTemp2282_2287) - Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
- Difference between actual and ideal motor encoder values for current view
indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift) - Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
- Scene mirror view angle in non-negative degrees, measured clockwise looking into
interferometer window.(sceneMirrorAngle) - Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
- Logical flag indicating that a data record is missing (true/false(missingDataFlag)
- Character string containing instrument name(instrumentUnitNumber)
- Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
- Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
indicative of front end air flow.(frontEndFanAirTempDiff) - Wave number in reciprocal centimeters(wnumsum6)
- Wave number in reciprocal centimeters(wnumsum4)
- Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
- AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectraAveragesCh1)
- AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectraAveragesCh2)
- Time offset of tweaks from base_time(time_offset)
- Observation date(dateYYMMDD)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
- lat(lat)
- AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
- lon(lon)
- Logical flag indicating whether HBB temperature is stable (true) or not stable
(false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable) - Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
- AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENEstimateNo2Ch2)
- Shortwave surface air brightness temperature from radiance average (2295_2300
cm-1)(surfaceLayerAirTemp2295_2300) - Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
- Time (HHMMSS)(timeHHMMSS)
- base time(base_time)
- Observation latitude(Latitude)
- Wave number in reciprocal centimeters(wnumsum8)
shbgndmfrC1.a1: - Time offset of tweaks from base_time(time_offset)
- Dummy altitude for Zeb(alt)
- Broadband Upwelling Hemispheric Irradiance, Uncalibrated Silicon Detector,
GNDMFR(up_hemisp_broadband) - Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- Source Consensus Winds File(raw_file)
- Data Logger Supply Voltage(logger_volt)
- base time(base_time)
- Detector Temperature(mfr_temp)
- Upwelling Hemispheric Irradiance, GNDMFR(up_hemisp_narrowband)
- Fields flagged by callang: 0 = No Flag\n,(callang_flags)
- lon(lon)
- lat(lat)
shbmfrsrC1.b1: - lat(lat)
- lon(lon)
- base time(base_time)
- Direct Normal Irradiance, Uncalibrated Silicon Detector, NIMFR(direct_norm_broadband)
- Diffuse Hemispheric Irradiance, MFRSR(diffuse_hemisp_narrowband)
- total_hemisp_broadband
- Hemispheric Irradiance, MFRSR(hemisp_narrowband)
- Dummy altitude for Zeb(alt)
- Fields flagged by callang: 0 = No Flag\n,(callang_flags)
- MFRSR Detector Temperature(mfrsr_temp)
- Direct Normal Irradiance, NIMFR(direct_norm_narrowband)
- Data Logger Supply Voltage(logger_volt)
- Cosine of Solar Zenith Angle(cosine_solar_zenith_angle)
- Time offset of tweaks from base_time(time_offset)
- Diffuse Hemispheric Broadband Irradiance (Approximate), MFRSR(diffuse_hemisp_broadband)
shbvceil25kC1.a1: - Higest signal detected(highest_signal_detected)
- Backscatter sum(sum_backscatter)
- Next lowest cloud base height(next_lowest_cloud_base_ht)
- Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
- lat(lat)
- Millivolts at internal ADC input (0 to 2500)(background_light)
- Millivolts at internal ADC input(window_contamination)
- Laser temperature(laser_temperature)
- Starting elevations(elevation_start)
- GPS raw data filename(filename)
- base time(base_time)
- Detection status. See details(detection_status)
- Warning and alarm status bits(status_string)
- Degrees from vertical (0 to +90)(tilt_angle)
- Lowest cloud base height detected.(lowest_cloud_base_ht)
- Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
- Dummy altitude for Zeb(alt)
- Aerosol backscatter coefficient at 355 nm(backscatter)
- Higest cloud base height(highest_cloud_base_ht)
- Time offset of tweaks from base_time(time_offset)
- Flag indicating aeri retrieval status(status_flag)
- Vertical visibility(vertical_visibility)
- lon(lon)
- Parameter noise(parameter_noise)
shbmwrtipC1.b1: - Time offset of tweaks from base_time(time_offset)
- (tknd)
- 31.4 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave31)
- Actual elevation angle(actel)
- 23.8 GHz calibration curve slope(gain23)
- 23.8 GHz blackbody+noise injection signal(bbn23)
- 23.8 GHz Blackbody signal(bb23)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- 31.4 GHz sky signal+noise injection signal(tipskynd31)
- 23.8 GHz sky signal(tipsky23)
- (tair)
- 23.8 GHz blackbody signal(tipbb23)
- 23.8 GHz noise diode calib (injection temp) at Tkxc(ndiode23)
- Blackbody temperature 1(tkbb1)
- lon(lon)
- Dummy altitude for Zeb(alt)
- 31.4 GHz goodness-of-fit coefficient(r31)
- 31.4 GHz sky signal(tipsky31)
- 31.4 GHz calibration curve offset(tbzenith31)
- 23.8 GHz calibration curve offset(tbzenith23)
- lat(lat)
- 31.4 GHz blackbody(bb31)
- base time(base_time)
- 23.8 GHz goodness-of-fit coefficient(r23)
- 23.8 GHz sky signal+noise injection signal(tipskynd23)
- Actual Azimuth(actaz)
- Tip configuration number(tipn)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- Blackbody temperature 2(tkbb2)
- Airmass value(airm)
- 31.4 GHz calibration curve slope(gain31)
- 31.4 GHz blackbody signal(tipbb31)
- Mixer kinetic (physical) temperature(tkxc)
- 23.8 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave23)
- 31.4 GHz noise diode calib (injection temp) at Tkxc(ndiode31)
- IR Brightness Temperature(ir_temp)
shbvceil25kC1.b1: - lat(lat)
- Dummy altitude for Zeb(alt)
- Next lowest cloud base height(next_lowest_cloud_base_ht)
- Higest cloud base height(highest_cloud_base_ht)
- lon(lon)
- Detection status. See details(detection_status)
- Backscatter sum(sum_backscatter)
- Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
- Higest signal detected(highest_signal_detected)
- Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
- Degrees from vertical (0 to +90)(tilt_angle)
- GPS raw data filename(filename)
- Vertical visibility(vertical_visibility)
- Millivolts at internal ADC input (0 to 2500)(background_light)
- Millivolts at internal ADC input(window_contamination)
- Aerosol backscatter coefficient at 355 nm(backscatter)
- Laser temperature(laser_temperature)
- Lowest cloud base height detected.(lowest_cloud_base_ht)
- Warning and alarm status bits(status_string)
- Parameter scale(parameter_scale)
- Starting elevations(elevation_start)
- Flag indicating aeri retrieval status(status_flag)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
shbmfrsrC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
shbaeriengineerC1.a1: - Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
- Scene mirror motor case temperature(mirrorMotorTemp)
- Radiance standard deviation during hot blackbody view averaged over (700_705
cm-1)(HBBviewStdDevRadiance700_705) - Instrument scene mirror position identifier(sceneMirrorPosition)
- Limit applied to HBBtempDrift in determination of HBBstable flag(HBBtempDriftLimit)
- Radiance standard deviation during ambient blackbody view averaged over
(2295_2300 cm-1)(ABBviewStdDevRadiance2295_2300) - Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
- Interferometer window temperature measured on the outside of the aluminum window
flange(interferometerWindowTemp) - Number of terms used in finite field of view correction(numberOfTerms)
- lat(lat)
- Dummy altitude for Zeb(alt)
- Shortwave elevated air brightness temperature from radiance average (2282_2287
cm-1)(elevatedLayerAirTemp2282_2287) - Ambient blackbody temperature - apex(ABBapexTemp)
- lon(lon)
- Rain sensor analog output: the rain sensor is located inside the hatch near the
sky aperture and is used to flag the critical condition of rain falling on
the AERI s(rainSensorIntensity) - BB Support Structure Temperature(BBsupportStructureTemp)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
- Radiance standard deviation during hot blackbody view averaged over (2295_2300
cm-1)(HBBviewStdDevRadiance2295_2300) - Weight factor for bottom used in calculating ambient blackbody temperature
average(ABBbottomTempWeight) - Observation date(dateYYMMDD)
- Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
indicative of front end air flow.(frontEndFanAirTempDiff) - Julian Day including day and fraction of day(JulianDay)
- Ambient blackbody temperature - rim top(ABBtopTemp)
- Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
- Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
- base time(base_time)
- Number of complete (forward+backward) interferogram scans in sample average(coadditionsCount)
- Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
- Radiance standard deviation during ambient blackbody view averaged over (985_990
cm-1)(ABBviewStdDevRadiance985_990) - Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
- Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
- Radiance standard deviation during ambient blackbody view averaged over
(2282_2287 cm-1)(ABBviewStdDevRadiance2282_2287) - Observation latitude(Latitude)
- Blackbody cavity geometry factor(BBcavityFactor)
- Number of views in a sequence(sceneMirPosCount)
- Time (HHMMSS)(timeHHMMSS)
- Original laser wavenumber assumed for this instrument(originalLaserWavenumber)
- Logical flag indicating whether HBB temperature is stable (true) or not stable
(false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable) - The noise equivalent radiance observed in the longwave channel during a sky view
at 1000 cm-1(LWskyNEN) - Ambient temperature used in calibration(calibrationAmbientTemp)
- Radiance standard deviation during hot blackbody view averaged over (985_990
cm-1)(HBBviewStdDevRadiance985_990) - Radiance standard deviation during hot blackbody view averaged over (2282_2287
cm-1)(HBBviewStdDevRadiance2282_2287) - Hot blackbody temperature - apex(HBBapexTemp)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
- Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
- Radiance standard deviation during ambient blackbody view averaged over (700_705
cm-1)(ABBviewStdDevRadiance700_705) - Hot blackbody temperature - rim top(HBBtopTemp)
- Interferometer front end fan airflow unheated temperature: used with heated
temperature as measure of airflow.(frontEndFanAirUnheatedTemp) - AERI interferometer temperature at second port(interferometerSecondPortTemp)
- Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
- Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
- Character string containing instrument name(instrumentUnitNumber)
- Limit applied to SWskyNEN in determination of SWskyNENacceptable(SWskyNENlimit)
- Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
- Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
- Logical flag indicating whether shortwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using SWskyNEN and
SWskyNENlimit.(SWskyNENacceptable) - Hot blackbody temperature - rim bottom(HBBbottomTemp)
- Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
- Spare temperature sensor (location TBD)(spareTemp)
- Imaginary radiance during sky view averaged over (675_680 cm-1)(skyViewImaginaryRadiance675_680)
- Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
- The noise equivalent radiance observed in the shortwave channel during a sky
view at 2500 cm-1(SWskyNEN) - Size of buffer holding initial spectrum(originalInterferogramSize)
- Imaginary radiance during sky view averaged over (700_705 cm-1)(skyViewImaginaryRadiance700_705)
- Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
- Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
- Detector temperature sensed via diode near detector(detectorTemp)
- Ambient air temperature near the interferometer(airNearInterferometerTemp)
- Relative humidity measured in the optics compartment atop the interferometer.(opticsCompartmentRelativeHumidity)
- Logical flag indicating that a data record is missing (true/false(missingDataFlag)
- Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
- Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
- AERI instrument unit serial number(AERIunitNumber)
- Interferometer front end fan airflow heated temperature: used with unheated
temperature as measure of airflow.(frontEndFanAirHeatedTemp) - Stirling cycle cooler current(coolerCurrent)
- Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
- Ambient air temperature near blackbodies(airNearBBsTemp)
- Shortwave surface air brightness temperature from radiance average (2295_2300
cm-1)(surfaceLayerAirTemp2295_2300) - Ambient air temperature at hatch opening(outsideAirTemp)
- AERI instrument data channel number(channelNumber)
- Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
- Size of buffer holding expanded spectrum before interpolation(expandedInterferogramSize)
- Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
- Signal conditioning electronics inside air temperature(SCEtemp)
- Weight factor for apex used in calculating ambient blackbody temperature average(ABBapexTempWeight)
- Logical flag indicating whether longwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using LWskyNEN and
LWskyNENlimit.(LWskyNENacceptable) - Stirling cycle cooler expander temperature(coolerExpanderTemp)
- Radiance standard deviation during ambient blackbody view averaged over
(2510_2515 cm-1)(ABBviewStdDevRadiance2510_2515) - Observation longitude(Longitude)
- Relative Humidity measured in the Interferometer Enclosure(interferometerEnclosureRelativeHumidity)
- Difference between actual and ideal motor encoder values for current view
indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift) - Corrective offset for final hot blackbody average temperature(HBBtempOffset)
- Duration of scene view(sceneViewDuration)
- Field of view half angle used in finite FOV correction(FFOVhalfAngle)
- Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
- Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
- Scene mirror view angle in non-negative degrees, measured clockwise looking into
interferometer window.(sceneMirrorAngle) - xxx(dataAvailable)
- Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
- Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
- Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
- Factor used to convert single-scan noise to two-minute equivalent(twoMinuteNoiseEstimateFactor)
- Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
- Longwave elevated air brightness temperature from radiance average (700_705
cm-1)(elevatedLayerAirTemp700_705) - Maximum departure from ideal of the mirror position over the course of all
contributing views. Typically two hot, two ambient, and one scene view are
examine(sceneMirPosEncoderMaxDrift) - Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
- Version number of Operational Software(systemReleaseNumber)
- Limit applied to LWskyNEN in determination of LWskyNENacceptable(LWskyNENlimit)
- Time at center of AERI sky observation period(Time)
- Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
- Radiance standard deviation during hot blackbody view averaged over (2510_2515
cm-1)(HBBviewStdDevRadiance2510_2515) - Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
- The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
centered on the sky view(HBBtempDrift) - Imaginary radiance during sky view averaged over (2295_2300 cm-1)(skyViewImaginaryRadiance2295_2300)
- Ambient blackbody temperature(ABBbottomTemp)
- Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
- Scene mirror position encoder value(sceneMirPosEncoder)
- Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
- Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
- Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
- Characteristic value representing overall longwave channel responsivity(LWresponsivity)
- Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
- Radiance standard deviation during ambient blackbody view averaged over (675_680
cm-1)(ABBviewStdDevRadiance675_680) - Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
- Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
- Scene mirror motor driver heat sink temperature(motorDriverTemp)
- AERI ingest computer temperature measured at back panel of computer(computerTemp)
- Radiance standard deviation during hot blackbody view averaged over (675_680
cm-1)(HBBviewStdDevRadiance675_680) - Observation Altitude(Altitude)
- Weight factor for apex used in calculating hot blackbody temperature average(HBBapexTempWeight)
- Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
- Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
- Imaginary radiance during sky view averaged over (2282_2287 cm-1)(skyViewImaginaryRadiance2282_2287)
- Time offset of tweaks from base_time(time_offset)
shbaerich2C1.a1: - Time offset of tweaks from base_time(time_offset)
- Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Scene mirror view angle in non-negative degrees, measured clockwise looking into
interferometer window.(sceneMirrorAngle) - Time at center of AERI sky observation period(Time)
- wavenumbers for standard deviation of radiance spectra(wnum2)
- Duration of scene view(sceneViewDuration)
- Ambient air temperature at hatch opening(outsideAirTemp)
- Character string containing instrument name(instrumentUnitNumber)
- Observation longitude(Longitude)
- Ambient temperature used in calibration(calibrationAmbientTemp)
- Time (HHMMSS)(timeHHMMSS)
- Observation latitude(Latitude)
- Wave number(wnum)
- lat(lat)
- Dummy altitude for Zeb(alt)
- Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
- lon(lon)
- Julian Day including day and fraction of day(JulianDay)
- Mean of radiance spectra ensemble(mean_rad)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- base time(base_time)
- Logical flag indicating that a data record is missing (true/false(missingDataFlag)
- AERI instrument data channel number(channelNumber)
- Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
- Observation Altitude(Altitude)
- Version number of Operational Software(systemReleaseNumber)
- BB Support Structure Temperature(BBsupportStructureTemp)
- Maximum departure from ideal of the mirror position over the course of all
contributing views. Typically two hot, two ambient, and one scene view are
examine(sceneMirPosEncoderMaxDrift) - Cold blackbody temperature used in calibration(calibrationCBBtemp)
- Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
- Observation date(dateYYMMDD)
- AERI instrument unit serial number(AERIunitNumber)
shbmfrsrC1.a0: - Dummy altitude for Zeb(alt)
- dirn6
- dirn3
- tot4
- tot2
- lat(lat)
- dirn1
- Time offset of tweaks from base_time(time_offset)
- dif4
- Detector Temperature(detector_temp)
- tot6
- dif2
- dif6
- dirn7
- dirn4
- supply_voltage
- dif1
- dirn5
- tot1
- base time(base_time)
- tot5
- tot3
- dirn2
- lon(lon)
- dif5
- tot7
- dif7
- dif3
|